Package: fluidsynth
Version: 2.4.3-50.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 47
Depends: libfluidsynth3 (>= 2.4.3-50.1), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.12.0)
Filename: amd64/fluidsynth_2.4.3-50.1_amd64.deb
Size: 15172
MD5sum: c5ca27546d7fbf3dd0c9aab112543e23
SHA1: 2d70ca9a76dfccde6d500216bccbcccb3291c349
SHA256: 459971939ca5235b510f957f69c5811a922e0173822a0e33db45d6f0d112cfdd
Section: sound
Priority: optional
Description: FluidSynth is a real-time software synthesizer
  FluidSynth is a real-time software synthesizer based on
  the SoundFont 2 specifications.
  .
  This package contains the command-line utilities.

Package: gigtools
Source: libgig
Version: 4.4.1-34.1
Architecture: amd64
Maintainer: Matt Flax <flatmax@pgb.unsw.edu.au>
Installed-Size: 615
Depends: libgig10 (>= 4.4.1-34.1), libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libgig11, libsndfile1 (>= 1.0.20), libstdc++6 (>= 13.1)
Filename: amd64/gigtools_4.4.1-34.1_amd64.deb
Size: 170430
MD5sum: 5d9a27baf37553b76e912f60ea2fe5d1
SHA1: 562ca75a703f5fb76fec0d3ca3faa896ea88be30
SHA256: a850fb46754e5991268306a5f31d01f66913a94db6f0310602822ea4abfada9c
Section: utils
Priority: optional
Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - utilities
  Raw file handling for audio sampler files based on either DLS Level 1/2,
  Gigasampler / GigaStudio, SoundFont version 2 and KORG sound format (.KSF and
  .KMP). These files are typically used in modern day audio waveform samplers
  and synthesizer keyboards.
  .
  There are also tools for reading Akai formated medias (CDRoms, HDs, Zip disks).
  Currently Akai S1000, S01, S2000 and S3000 series are supported.
  .
  This package contains the following command line tools:
  .
  gigdump:
    Prints out the content of a .gig file.
  gigextract:
    Extracts audio samples from a .gig file.
  gigmerge:
    Combines multiple .gig files to one .gig file.
  gig2mono:
    Converts .gig files from stereo to mono.
  gig2stereo:
    Converts .gig files to true interleaved stereo sounds.
  dlsdump:
    Prints out the content of a DLS file.
  rifftree:
    Prints out the RIFF tree of an arbitrary RIFF container file.
  sf2dump:
    Prints out the content of a .sf2 file.
  sf2extract:
    Extracts audio samples from a .sf2 file.
  korgdump:
    Prints out the content of KORG sound files (.KSF, .KMP).
  korg2gig:
    Converts KORG (.KSF, .KMP) sound files to GigaStudio (.gig) files.
  akaidump:
    Dump an AKAI media i.e. from a CDROM drive as disk image file to your HD.
  akaiextract:
    Extracts audio samples from an AKAI media or from an AKAI disk image file.

Package: libfluidsynth-dev
Source: fluidsynth
Version: 2.4.3-50.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 168
Depends: libfluidsynth3 (>= 2.4.3-50.1)
Filename: amd64/libfluidsynth-dev_2.4.3-50.1_amd64.deb
Size: 43196
MD5sum: 9478985013407d6db041a71aa8d5ffaf
SHA1: c20f2b418fc9c06eeec2c629f6ba6ef49735e709
SHA256: 8a85215820d806d1fccf0c629682b59a913884c9f163313f54f4046f5e24b03e
Section: libdevel
Priority: optional
Description: FluidSynth is a real-time software synthesizer
  FluidSynth is a real-time software synthesizer based on
  the SoundFont 2 specifications.
  .
  This package contains the header file required for compiling
  hosts and plugins.

Package: libfluidsynth3
Source: fluidsynth
Version: 2.4.3-50.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 461
Depends: libasound2t64 (>= 1.0.16), libc6 (>= 2.33), libglib2.0-0t64 (>= 2.32.0), libgomp1 (>= 4.9), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libpulse0 (>= 0.99.1), libsndfile1 (>= 1.0.20), libstdc++6 (>= 11)
Replaces: libfluidsynth2 (<= 2.4.3-50.1)
Filename: amd64/libfluidsynth3_2.4.3-50.1_amd64.deb
Size: 201046
MD5sum: df8adaf3fd653f6ab0f61e7c747ef7ed
SHA1: b320b629224f56142f239ec8854093297be5521a
SHA256: 5891a35eb316ba4850bebced50c6d27e32c3b926cc7f17297bb6bb2e79d81129
Section: libs
Priority: optional
Description: FluidSynth is a real-time software synthesizer
  FluidSynth is a real-time software synthesizer based on
  the SoundFont 2 specifications.

Package: libgig-dev
Source: libgig
Version: 4.4.1-34.1
Architecture: amd64
Maintainer: Matt Flax <flatmax@pgb.unsw.edu.au>
Installed-Size: 1737
Depends: libgig11 (>= 4.4.1-34.1)
Filename: amd64/libgig-dev_4.4.1-34.1_amd64.deb
Size: 314528
MD5sum: f932e97397a4f7283dc2dd8ba21dc1f0
SHA1: e6a7e56fd4dc2714fb19526182078f8ebbd482f3
SHA256: 99e9e051f2a8001c69752231da271781019f7fe4772ff95d06b2b4480bfb8d4f
Section: libdevel
Priority: optional
Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files - development files
  libgig is a C++ library for reading, modifying and creating Gigasampler /
  GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont
  version 2 (.sf2) and KORG sound files (.KMP and .KSF). These files are
  typically used in modern day audio waveform samplers and synthesizer keyboards.
  .
  Since the Gigasampler / GigaStudio and DLS formats are based ontop of the
  binary RIFF container format, this library also provides convenient access to
  RIFF files in general.
  .
  This package also contains a Linux/POSIX ported version of libakai, which
  provides support for reading Akai formated medias (CDRoms, HDs, Zip disks).
  Currently Akai S1000, S01, S2000 and S3000 series are supported.
  .
  For more information visit
  http://www.linuxsampler.org/libgig/
  .
  This package contains the header files needed for development with libgig.
  You will need this only if you intend to compile programs that use this
  library.

Package: libgig11
Source: libgig
Version: 4.4.1-34.1
Architecture: amd64
Maintainer: Matt Flax <flatmax@pgb.unsw.edu.au>
Installed-Size: 729
Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), libuuid1 (>= 2.16)
Conflicts: libgig, libgig10, libgig3c2, libgig6, libgig7, libgig8, libgig9
Replaces: libgig, libgig10, libgig3c2, libgig6, libgig7, libgig8, libgig9
Filename: amd64/libgig11_4.4.1-34.1_amd64.deb
Size: 236284
MD5sum: d0ffe7843d157cdc433785f32f8ad976
SHA1: 2605af94016e5b5005ae7f49ed2bd437fea71e0d
SHA256: 54026b7f511b13752aa49cd11ffd1b0845d9209f174c69cf2c42a1a92cc4d77f
Section: libs
Priority: optional
Description: C++ Library for accessing Gigasampler, DLS, SF2, KORG, AKAI files
  libgig is a C++ library for reading, modifying and creating Gigasampler /
  GigaStudio (.gig) files, DLS (Downloadable Sounds) Level 1/2 files, SoundFont
  version 2 (.sf2) files and KORG sound files (.KMP and .KSF). These files are
  typically used in modern day audio waveform samplers and synthesizer keyboards.
  .
  Since the Gigasampler / GigaStudio and DLS formats are based ontop of the
  binary RIFF container format, this library also provides convenient access to
  RIFF files in general.
  .
  This package also contains a Linux/POSIX ported version of libakai, which
  provides support for reading Akai formated medias (CDRoms, HDs, Zip disks).
  Currently Akai S1000, S01, S2000 and S3000 series are supported.
  .
  For more information visit
  http://www.linuxsampler.org/libgig/

Package: libmad0
Source: libmad
Version: 0.15.1b-12.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 146
Depends: libc6 (>= 2.14)
Filename: amd64/libmad0_0.15.1b-12.1_amd64.deb
Size: 57230
MD5sum: 1232fa7378dda27482df0d06bdabee06
SHA1: ac8ba3b58a78958cbc4cf7a9800940cb6f0480a8
SHA256: c7b41f211cffaa4278a406f6fe537740099ffe5f36eca82e9338b0e2d7e44487
Section: libs
Priority: optional
Description: An MPEG audio decoder library
  MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1
  and the MPEG-2 extension to Lower Sampling Frequencies, as well as the
  so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II,
  and Layer III a.k.a. MP3) are fully implemented. MAD supports high
  quality 24-bit PCM output for modern audio technologies. MAD computes
  using 100% fixed-point (integer) computation, so you can run it without
  a floating point unit.

Package: libmad0-dev
Source: libmad
Version: 0.15.1b-12.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 194
Depends: libmad0 (>= 0.15.1b-12.1)
Filename: amd64/libmad0-dev_0.15.1b-12.1_amd64.deb
Size: 67216
MD5sum: 128b04f840f0e460cd53c782aeee5cb2
SHA1: dcca73e4ee1c776ca011ce6f60e3e994417741f4
SHA256: 37e2748e704c434b23e417a5a3e81ad023b18623d9e41b5bece9b1dfc867e87c
Section: libdevel
Priority: optional
Description: An MPEG audio decoder library - development files
  MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1
  and the MPEG-2 extension to Lower Sampling Frequencies, as well as the
  so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II,
  and Layer III a.k.a. MP3) are fully implemented. MAD supports high
  quality 24-bit PCM output for modern audio technologies. MAD computes
  using 100% fixed-point (integer) computation, so you can run it without
  a floating point unit.
  .
  This package contains headers, documentation and static libraries.

Package: librubberband-dev
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 1036
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/librubberband-dev_4.0.0-18.1_amd64.deb
Size: 190420
MD5sum: 68a1a00c86562b83f442b209f965f245
SHA1: a24b49731e8997093869bb16297b0f31d0cf4473
SHA256: a57d6d89890dcb1101c64a054f7ffc17b66f93f73d959d93079e8bbf52704339
Section: libdevel
Priority: extra
Description: An audio time-stretching and pitch-shifting library (development files)
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains development files for linking against
  librubberband, along with the static version of the library. API
  documentation is available at
  http://www.breakfastquay.com/rubberband/code-doc/ .

Package: librubberband3
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 391
Depends: libc6 (>= 2.34), libfftw3-double3 (>= 3.3.10), libgcc-s1 (>= 3.3.1), libsamplerate0 (>= 0.1.7), libstdc++6 (>= 13.1)
Replaces: librubberband2 (<= 4.0.0-18.1)
Filename: amd64/librubberband3_4.0.0-18.1_amd64.deb
Size: 140780
MD5sum: be09d2b44ee7fbe13374e903dd85002e
SHA1: f1e82ae0e051edf3af087e77a7c77015a9457479
SHA256: ab452b02a93f8c41d71e5e177792e9679ce4fc798d5ee9a30a9b595f85399b95
Section: libs
Priority: extra
Description: An audio time-stretching and pitch-shifting library
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.

Package: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 576
Depends: librubberband3 (= 4.0.0-18.1)
Replaces: rubberband-cli (<= 4.0.0-18.1)
Filename: amd64/rubberband_4.0.0-18.1_amd64.deb
Size: 121082
MD5sum: 01425114b233e8a19bcc3c19ebe53b22
SHA1: e3696e4fd688c11dd661b052063fc6302c6348b7
SHA256: bbd39b532852159e38eb35fe95c1f3b43c64bc3f2a79e2545a87da5baed42f72
Section: sound
Priority: extra
Description: An audio time-stretching and pitch-shifting utility
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains a command-line utility that can be used to
  exploit Rubber Band's capabilities.

Package: rubberband-ladspa
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 321
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/rubberband-ladspa_4.0.0-18.1_amd64.deb
Size: 126292
MD5sum: d7ed1d8fdf778a7c5fee7f200f7fbf2f
SHA1: 4a4e0ce1467a079a6eb3a22e71a978ca6fd22694
SHA256: c1378909143ae511eaaab0382719b3e465a8ae682ff954344cadcf1e38f74c7f
Section: sound
Priority: extra
Description: A LADSPA plugin for audio pitch-shifting
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains a LADSPA plugin.

Package: rubberband-lv2
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 330
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/rubberband-lv2_4.0.0-18.1_amd64.deb
Size: 127746
MD5sum: 91ede9c39cc0bb431802052a6fe95e8b
SHA1: 4ba4d3b8605c8b7e510f00b64c3fa6a85f8edb9f
SHA256: 73e86141557b0de51acb0ac79ee9a4fdcd06accbb1584130d93b504b472edfbb
Section: sound
Priority: extra
Description: A LV2 plugin for audio pitch-shifting
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains a LV2 plugin.

Package: rubberband-vamp
Source: rubberband
Version: 4.0.0-18.1
Architecture: amd64
Maintainer: Rui Nuno Capela <rncbc@rncbc.org>
Installed-Size: 282
Depends: librubberband3 (= 4.0.0-18.1)
Filename: amd64/rubberband-vamp_4.0.0-18.1_amd64.deb
Size: 115188
MD5sum: d04042151fcdef9757e834d4034d871f
SHA1: cf144aa3b8bf84b973b88a347e3dc4a21d8b4bce
SHA256: 3731e9415b299044a0fb1923aa47ecab8aa572f58b0231faad3df2a0b7c2acdc
Section: sound
Priority: extra
Description: Vamp plugins using Rubber Band
  Rubber Band is a library and utility program that permits you to
  change the tempo and pitch of an audio recording independently of
  one another.
  This package contains VAMP plugins.