bluez-5.65-150500.3.11.1 < > , ep9|lL |(\k8C=JU H gBZ d+!JqPLߟD@846P zq pcȮzL@+ 0m7\>CzQ \HI:dtכ٫đTaIi Ff,C5.i`S#)࣑b=@S XH"_X_H/#e0Uq: WP]:˄W=fE+dOk
`0
~? > N ? d
5 | " =
= G G ^ G
G G " G
" G # G %W G & & G ' (@ ( ( ( ,z ( ( , 8 , _ 9 .@ _ : 6z _ = Ş > Ŧ ? Ů @ Ŷ B ž F G G H $ G I @ G X Ȉ Y Ƞ Z [ \ G ] G ^ b ϊ c 3 d г e и f л l н u G v w G x G y z ` p ? H L P T X ^ C bluez 5.65 150500.3.11.1 Bluetooth Stack for Linux BlueZ provides support for the core Bluetooth layers and protocols. es390zl39 T=cSUSE Linux Enterprise 15 SUSE LLC GPL-2.0-or-later https://www.suse.com/ Hardware/Mobile http://www.bluez.org linux s390x
if [ -x /usr/bin/systemctl ]; then
test -n "$FIRST_ARG" || FIRST_ARG="$1"
[ -d /var/lib/systemd/migrated ] || mkdir -p /var/lib/systemd/migrated || :
for service in bluetooth.service bluetooth-mesh.service ; do
sysv_service=${service%.*}
if [ ! -e /usr/lib/systemd/system/$service ] &&
[ ! -e /etc/init.d/$sysv_service ]; then
mkdir -p /run/systemd/rpm/needs-preset
touch /run/systemd/rpm/needs-preset/$service
elif [ -e /etc/init.d/$sysv_service ] &&
[ ! -e /var/lib/systemd/migrated/$sysv_service ]; then
/usr/sbin/systemd-sysv-convert --save $sysv_service || :
mkdir -p /run/systemd/rpm/needs-sysv-convert
touch /run/systemd/rpm/needs-sysv-convert/$service
fi
done
fi
# Avoid restoring outdated stuff in posttrans
for _f in 50-bluetooth.conf; do
[ ! -f "/etc/modprobe.d/${_f}.rpmsave" ] || \
mv -f "/etc/modprobe.d/${_f}.rpmsave" "/etc/modprobe.d/${_f}.rpmsave.old" || :
done
[ -x /usr/bin/udevadm ] && /usr/bin/udevadm control --reload || :
# todo: check if this is still obeyed / needed with systemd
PNAME=bluetooth
SUBPNAME=
SYSC_TEMPLATE=/usr/share/fillup-templates/sysconfig.$PNAME$SUBPNAME
# If template not in new /usr/share/fillup-templates, fallback to old TEMPLATE_DIR
if [ ! -f $SYSC_TEMPLATE ] ; then
TEMPLATE_DIR=/var/adm/fillup-templates
SYSC_TEMPLATE=$TEMPLATE_DIR/sysconfig.$PNAME$SUBPNAME
fi
SD_NAME=""
if [ -x /bin/fillup ] ; then
if [ -f $SYSC_TEMPLATE ] ; then
echo "Updating /etc/sysconfig/$SD_NAME$PNAME ..."
mkdir -p /etc/sysconfig/$SD_NAME
touch /etc/sysconfig/$SD_NAME$PNAME
/bin/fillup -q /etc/sysconfig/$SD_NAME$PNAME $SYSC_TEMPLATE
fi
else
echo "ERROR: fillup not found. This should not happen. Please compare"
echo "/etc/sysconfig/$PNAME and $TEMPLATE_DIR/sysconfig.$PNAME and"
echo "update by hand."
fi
# We need the bluez systemd service enabled at any time. It won't start up
# on its own, as it is triggered by udev in the end (bnc#796671)
/usr/bin/systemctl enable bluetooth.service 2>&1 || :
/usr/bin/systemctl daemon-reload >/dev/null 2>&1 || :
test -n "$FIRST_ARG" || FIRST_ARG="$1"
if [ "$FIRST_ARG" -eq 0 -a -x /usr/bin/systemctl ]; then
# Package removal, not upgrade
/usr/bin/systemctl --no-reload disable bluetooth.service bluetooth-mesh.service || :
(
test "$YAST_IS_RUNNING" = instsys && exit 0
test -f /etc/sysconfig/services -a \
-z "$DISABLE_STOP_ON_REMOVAL" && . /etc/sysconfig/services
test "$DISABLE_STOP_ON_REMOVAL" = yes -o \
"$DISABLE_STOP_ON_REMOVAL" = 1 && exit 0
/usr/bin/systemctl stop bluetooth.service bluetooth-mesh.service
) || :
fi
test -n "$FIRST_ARG" || FIRST_ARG="$1"
if [ $1 -eq 0 ]; then
# Package removal
for service in bluetooth.service bluetooth-mesh.service ; do
sysv_service="${service%.*}"
rm -f "/var/lib/systemd/migrated/$sysv_service" || :
done
fi
if [ -x /usr/bin/systemctl ]; then
/usr/bin/systemctl daemon-reload || :
fi
if [ "$FIRST_ARG" -ge 1 ]; then
# Package upgrade, not uninstall
if [ -x /usr/bin/systemctl ]; then
(
test "$YAST_IS_RUNNING" = instsys && exit 0
test -f /etc/sysconfig/services -a \
-z "$DISABLE_RESTART_ON_UPDATE" && . /etc/sysconfig/services
test "$DISABLE_RESTART_ON_UPDATE" = yes -o \
"$DISABLE_RESTART_ON_UPDATE" = 1 && exit 0
/usr/bin/systemctl try-restart bluetooth.service bluetooth-mesh.service
) || :
fi
fi @ + h@ 8 8@ O@ 8 0
6 B8 \ 8@ Hp _ r !K > " ' h ?L <& `+ U % r $ +n i FV 1 * A큤A큤AA큤AA큤A큤A큤A큤A e壼e壼e壽e壽e壽e壽e壽e壽e壽e壽e壽e壽e壽e壽e壽e壽e壼e壼e壽e壽e壼e壼e壼e壽e壽e壼e壼e^H9bݳV^mjc#Be壼e壼e壔b1avZBT_TWG)bݳVag'PؕQ_TbݳVPؕPؕTUU_TUPؕbݳVWXK7bݳWe壔e壼eHje壼e壼e壼e壼e壼e壼e壼e壼e壼 46c021be659c9a1c4e55afd04df0c059af1f3d98a96338236412e449bf7477b4 0630e53462aeafd8bd6586ede7a3676c6e26733151a6cf046a839f3822fd3fd4 5cd7b656912653ce0e8006e90c0419e9c4d1805e9d516aa5fe4e1aee722f5bbb 6834bbf9e9e59f7f45bc5f8789bbbe566953fd3f9137455cb8cd5f4be7b2b0f1 45b124fe4377b2daca355144773b7dde9c467a7eb8fef7ec4f12de0eec920ac8 206030499b85ede1f944402066cb6c6e3ee78fdbc6e32fa250b0e482065ea73c ca8617a7499e47719e7b65740ad8763b0bd717d3fcd5d24a03c8bae572756b67 5239829c57100c9885f2f6ce303a337797c9bbd353221db22a95753ccd87922a 9a1cabe725e25549e96cab7c0510db89a24862c9d7cf5e104f34a22ac2afc125 fb046d31aa357bd204558b4b1386c90195781c44b45a33b1701ccfbf078ec743 fd0c96639008114016548abd551a7ef96ba322fa3b36c4bac8a8f2488635767a a6fd1887f6e7c6d1f653e65dc7b46ff5f16f2dcd25191974bf9ad5bf7b3b0352 ecb6325a7254a4bf5e970c5c93cbf69a9fa4918310c94c4809654dbf73f28555 45dd4648dc4ea14944c14bec820ecafe3c49e1d496e4b07adb1e53dedc100666 f92d3a08fb165046734e9e0f0629b41faeaf0db598bf3e62decca80270739a6e 8e91cb0d84421bba2d178c7965231a90a5f02542c617f3cf45e3d11a89c71a1f 0cf58c0c6e0db10d069464fd30469fb326d3785fdb5ed9b4cbf954fa3ba41b66 d8b56ca7942637b99c55fbb4f73e3712d40c4d2fa8b854f274163fb77746ef2b aec969569ce22031c072b9afbdfc84385e91c778a8b32864af322ae221998b16 8004c707a071bab12c20f03d0f63d3edea59bbc4d1697ebec44b12fa58f81fea c211c4412f39dec5dd93c3da9a8b4bbeec37825fdb74d5fd8efd23573f11f1ed b755ef7f8d52f660e25689b4169a85d5be0160ef44951cff38237b94633ebd9a 68e8f6074de7cab66cebd7e6d5ea655c84509d2a53e33d604ba4c1c1b88932eb 33deb9aa9bd8340506b652d37e17c166714f1fd19dcb27e94a5b8897596ee925 bbb91c4ed4d37c119254b643f6a12d9eb7378f91fa96dbe47eca3c8e42c7075d 992fb831482c2fb407956880835c81ac7b2ab112324f41db84bab7132e1e39c3 cf50ffde26371fa8416eab9c0f04fae5a77242d233e478917164c1d6a3ebe9ce d6ccf5e93a22c869baf9d46570afd6c384b8f36bbcbbe1fdb597139b6176f514 2e13c706f32703f370051f5d28623154e88e6bee635fdd851cc3c11816c594ff ddcb86eaa3c846e1ac458a09af00491b111a7bdb44c11471e04649fdca044cdd 53fedd9c03c79d389a93481932392379de6204f3beb8bf0d2f44221cd18c919c 5e027f88f1374ddcbff05b188617e46193f6e39ba8d1899d3e2b21fdc3090f2d 2a077413737530e793190097137ffd58613d408a22ea749ca0bcb31659e21434 ad2be080cd5fe43cb8d726aeaf1f82f5208430fcac8def0b842e2c1ad28a4a8a ba8a1db8467cafa01f7b553328512c3f428c2eeb5767a397ac4b333aad2b56e6 fca7e98b34145aaedf02549cd99d9ac68e2d0936fbb99201198bb6605aedbbc3 cbc1cd1ed5e8090692529bb06eff41bf192f637d90cb17a572679cef42ffc550 bfbdf036d003ce7a2b4f4941bb7f11c44e09177b32815442d1823d671c4431eb c28996ee9e08bf33dba34534f4d5a8ee759199cf4c77de143d45673aea0a30c2 c70bb39014dcb084a1b0326bf173c2eb0fcc3a528c046aff004b780a25b03d69 4d06af4a62e6d523de9a81d0e039b1c9a47450b59a8f06fdb946da6120e0f7be 00ea95738af97339880935868cca343431f8d786ee7cae0f05ca89876ca2748f 8da781ba67675b25f8bea841acf63d9e264d4b6da1db92cccf70b42e2b878ca3 4f581f9a7e5dd2b5bd5a8dc93ec881f635095ab5f13160d2f2f1dc5f8175066a 3cdf7f0d1c5401204d2255fcf31db171558dbf9fed1d117965321da7f0653252 d47d6b46b60b2c9d428431f049e2399719131bf1eceda1fa7c8850f37e174590 0d0c2b4bb22ae06c1660e89618ca9cbfb0f88164fe0afbb24a983d054fc84e6a 8727ca1d8905f9a0d3e8bb58ec7818c1dfbec6d1f5840cbb2c7fc6e495d89aa4 0e91977e5a416984822962bfeac5b0176d6374b73ca85ad6ce84d85a60266cc5 daff7df241b157ca476366b76216042ed14ab1e46ce9c49ee3f53854acef6673 d54032505372acf0e3748d1379ff65678f6578d9924e35fb566bbaac86b99772 362c44bc2b19cb9f84d556a61992359aa73f092c046f495bb9615a0fcaa723df b499eddebda05a8859e32b820a64577d91f1de2b52efa2a1575a2cb4000bc259 3f7bab2a08008592a4cd8b692c299ea8dc5a3b3f88fbb3d3ada6c8c3183ceb17 1f43cc19ef063c5b5a2a8088d65bda3d9cc33c6497b73d3802f71d01b609d4fb 98b0ec951f088029fd5bbc82365bce7951f080a9d1488f0bca3194426ded8c5e 70e481a60a1f704dfd8a15b6bc97a71146b18f0f01912f755fcabdb2b309641b 4402701baa17c2ef9d28cb4b7f426818e5653de40b1d7afaca3f9ceebef345e5 291ad866ab0342727f01c9ae98a07d19a7167369d732ef8641a2e4b9d5c5cc02 8b142d5c296d14104eb4d5250674966c76ae5f6aa9c5a47ff49fbbecd5d20eb6 4ff4a6df4eb26cfb1b209dd0c1fd88d16ceb8a67b910b82114167e800eb49857 root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root root bluez-5.65-150500.3.11.1.src.rpm bluez bluez(s390-64) bluez-audio bluez-hcidump bluez-utils obexd-client @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @
/bin/sh /bin/sh /bin/sh /bin/sh /bin/sh libasound.so.2()(64bit) libasound.so.2(ALSA_0.9)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.10)(64bit) libc.so.6(GLIBC_2.15)(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.2)(64bit) libc.so.6(GLIBC_2.2.3)(64bit) libc.so.6(GLIBC_2.25)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.2)(64bit) libc.so.6(GLIBC_2.3.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libc.so.6(GLIBC_2.8)(64bit) libc.so.6(GLIBC_2.9)(64bit) libdbus-1.so.3()(64bit) libdbus-1.so.3(LIBDBUS_1_3)(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.2)(64bit) libglib-2.0.so.0()(64bit) libjson-c.so.3()(64bit) libreadline.so.7()(64bit) libudev.so.1()(64bit) libudev.so.1(LIBUDEV_183)(64bit) libudev.so.1(LIBUDEV_196)(64bit) rpmlib(CompressedFileNames) rpmlib(FileDigests) rpmlib(PayloadFilesHavePrefix) rpmlib(PayloadIsXz) systemd systemd systemd systemd 3.0.4-1 4.6.0-1 4.0-1 5.2-1 4.14.3 eqeodZ@cY!@c< @c:c!@b@bwbrjbgb7@b$@b#Pb@aal@a$@aj@a@`.```9@`m`e`6?`U_cO_Z@^b^H^t@^r
@^AE]q]@]|@]@]](]@]4@]@]@]Y=]'$]%@] \O\7\mA@\U@\=@[)ZZZkZ0@Zp^@ZF.@Z/YcYjY_wYOY9<@Y(Y
XZXXX@W
W@WgWV@WI@W
@@VV$@V3[V +UpUUc@U@UUU @UTи@T@T{T`jlee@suse.com jlee@suse.com jlee@suse.com jlee@suse.com jlee@suse.com jlee@suse.com jlee@suse.com dmueller@suse.com code@bnavigator.de gmbr3@opensuse.org gcomes.obs@gmail.com seife+obs@b1-systems.com mwilck@suse.com seife+obs@b1-systems.com gmbr3@opensuse.org bjorn.lie@gmail.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com acho@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com dmueller@suse.com jengelh@inai.de tchvatal@suse.com seife+obs@b1-systems.com acho@suse.com idonmez@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com stefan.bruens@rwth-aachen.de seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com jengelh@inai.de seife+obs@b1-systems.com seife+obs@b1-systems.com antoine.belvire@opensuse.org acho@suse.com jslaby@suse.com fcrozat@suse.com msuchanek@suse.de lnussel@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com acho@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com normand@linux.vnet.ibm.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com msuchanek@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com tchvatal@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com jengelh@inai.de seife+obs@b1-systems.com fbui@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com dimstar@opensuse.org seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com rguenther@suse.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com seife+obs@b1-systems.com - Porting Yifan Jiang 's solution of bsc#1220329
to SLE15-SP5 (bsc#1209153)
- Add necessary Supplements (gnome-bluetooth, blueman, bluedevil5)
to bluez-obexd, so that file transfer features of the applications
can be used by default (bsc#1209153, bsc#1220329).
- Update the description of bluez-obexd. - Add pbap-Fix-not-checking-Primary-Secundary-Counter-leng.patch
pbap: Fix not checking Primary/Secundary Counter length
(bsc#1218301)(CVE-2023-50230)(bsc#1218300)(CVE-2023-50229) - Add avrcp-Fix-crash-while-handling-unsupported-events.patch
avrcp: Fix crash while handling unsupported events
(bsc#1210398)(CVE-2023-27349) - For pushing bluez 5.65 to 15-SP5 (bluez-5.62), sync more change log:
(jsc#PED-1407)
- The hcidump-Fix-set_ext_ctrl-global-buffer-overflow.patch
be merged to bluez-5.51 in 2018. (bsc#1013732)(CVE-2016-9801)
- The following btmon patches are merged to bluez-5.51 and later:
0001-btmon-fix-segfault-caused-by-buffer-over-read.patch
0002-btmon-fix-segfault-caused-by-buffer-over-read.patch
0003-btmon-fix-segfault-caused-by-buffer-over-read.patch
0004-btmon-Fix-crash-caused-by-integer-underflow.patch
0005-btmon-fix-stack-buffer-overflow.patch
0006-btmon-fix-multiple-segfaults.patch
0007-btmon-fix-segfault-caused-by-integer-underflow.patch
0008-btmon-fix-segfault-caused-by-integer-undeflow.patch
0009-btmon-fix-segfault-caused-by-buffer-over-read.patch
0010-btmon-fix-segfault-caused-by-buffer-overflow.patch
0011-btmon-fix-segfault-caused-by-integer-underflow.patch
0012-btmon-fix-segfault-caused-by-buffer-over-read.patch
(bsc#1015173)(CVE-2016-9918)(bsc#1013893)(CVE-2016-9802)
- The shared-gatt-server-Fix-not-properly-checking-for-sec.patch
be merged to bluez-5.57 in 2021.
(bsc#1186463 CVE-2021-0129 CVE-2020-26558)
- The gatt-Fix-potential-buffer-out-of-bound.patch be merged to
bluez-5.56 in 2021. (bsc#1187165 CVE-2021-3588)
- The shared-gatt-db-Introduce-gatt_db_attribute_set_fixed.patch
be merged to bluez-5.56 in 2021. (bsc#1187165 CVE-2021-3588)
- The gatt-Make-use-of-gatt_db_attribute_set_fixed_length.patch
be merged to bluez-5.56 in 2021. (bsc#1187165 CVE-2021-3588)
- Add JIRA-SLE-18497 number to 5.60, 5.61 and 5.62 update log
to sync with bluez.changes in SLE15-SP5.
- Install modprobe.conf files to %_modprobedir
This change already in bluez.sepc in openSUSE:Factory/bluez.
Sync the change log here. (bsc#1196275, jsc#SLE-20639) - For pushing bluez 5.65 to 15-SP5 (bluez-5.62), sync the spec file and
log: (jsc#PED-1407)
- SLE15-SP5 will direct use bluez.changes for openSUSE TW.
So keep the contents of SLE bluez.changes to bluez.changes.sle file.
- Put to /usr/share/doc/packages/bluez/bluez.changes.sle in package. - For pushing bluez 5.65 to 15-SP5 (bluez-5.62), sync the spec file and
log: (jsc#PED-1407)
- SLE15-SP5 will use the bluez.spec from openSUSE TW. The following
are changes in bluez.spec of SLE15-SP5:
- Obsoletes: bluez-utils <= 3.36
to
Obsoletes: bluez-utils < 3.36
- Obsoletes: bluez-audio <= 3.36
to
Obsoletes: bluez-audio < 3.36
- In %package -n libbluetooth3:
Obsoletes: bluez-libs <= 3.36
to
Obsoletes: bluez-libs < 3.36
- In %package cups, add the following statements
Requires: %{name}
Requires: cups
Supplements: (%{name} and cups)
- In %package test
Requires: python3-gobject2
to
Requires: python3-gobject
- In %package auto-enable-devices package, add
Requires(post): systemd
- Add %package obexd and %package zsh-completion
and their %description
- In %prep
- Removed
%setup -q
- Removed
[#] FIXME: Change the dbus service to be a real service, not systemd launched
sed -i "s:Exec=/bin/false:Exec=%{_libexecdir}/bluetooth/obexd:g" obexd/src/org.bluez.obex.service
sed -i "/SystemdService=.*/d" obexd/src/org.bluez.obex.service
[#] END FIXME
- In %build, add
- -with-dbusconfdir=%{_datadir} \
- In %install
- Removed
[#] FIXME: Do not delete the systemd service once we support systemd user/session services
rm %{buildroot}%{_userunitdir}/obex.service
[#] end FIXME
- org.bluez.mesh.service to %{_sysconfdir}/dbus-1/system-services/,
to
org.bluez.mesh.service to %{_datadir}/dbus-1/system-services/,
- In %files
- Add
%{_bindir}/isotest
%{_libexecdir}/bluetooth/obexd
%{_mandir}/man1/isotest.1%{?ext_man}
- %config %{_sysconfdir}/dbus-1/system.d/bluetooth.conf
to
%{_datadir}/dbus-1/system.d/bluetooth.conf
- Removed
%{_datadir}/dbus-1/services/org.bluez.obex.service
- Removed
%{_datadir}/zsh/site-functions/_bluetoothctl
- Add %files zsh-completion
- SLE15-SP5 will direct use bluez.changes for openSUSE TW.
So keep the contents of SLE bluez.changes to bluez.changes.sle file.
- Removed shared-gatt-server-Fix-heap-overflow-when-appending-.patch in
SLE15-SP5 bluez because 5.65 bluez already includes it.
- The code shall check if the prepare writes would append more the
allowed maximum attribute length. (bsc#1194704 CVE-2022-0204) - For pushing bluez 5.65 to 15-SP5 (bluez-5.62), sync the patches and
log: (jsc#PED-1407)
- hcidump-fixed-hci-frame-dump-stack-buffer-overflow.patch patch
be merged to 5.51 mainline. So 5.65 bluez already includes it.
(PATCH-FIX-UPSTREAM)(bsc#1013721)(CVE-2016-9800)
- Add the following patches from the bluez-5.62 of 15-SP5:
- disable_some_obex_tests.patch
- disable tests for bypass boo#1078285
- hcidump-Add-assoc-dump-function-assoc-date-length-ch.patch
- bsc#1013708 CVE-2016-9797
- Al Cho has sent it to upstream but it not be merged:
https://lore.kernel.org/all/20181031081508.25927-1-acho@suse.com/T/
- hcidump-Fix-memory-leak-with-malformed-packet.patch
- bsc#1015171 CVE-2016-9917
- Al Cho has sent it to upstream but it not be merged:
https://www.spinics.net/lists/linux-bluetooth/msg79852.html
- hcidump-Fixed-malformed-segment-frame-length.patch
- bsc#1013712 CVE-2016-9798
- Did not send to upstream.
- 0001-rpi3-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch
- Move 43xx firmware path for RPi3 bluetooth support bsc#1140688 bsc#995059 bsc#1094902
- From https://www.yoctoproject.org/pipermail/yocto/2016-April/029424.html
- Respin the following patches
- bluez-test-2to3.diff
- Removed some parts of patch because those codes be included
in a1939bd51e0faba9a8550eea2590d99cb63a33c1 since 5.65.
- The following patches are the same between SLE15-SP5 with openSUSE TW:
- bluez-5.45-disable-broken-tests.diff in 15-SP5 matchs with
bluez-disable-broken-tests.diff in openSUSE TW.
- 0002-rpi3-Move-the-43xx-firmware-into-lib-firmware.patch in 15-SP5
matchs with RPi-Move-the-43xx-firmware-into-lib-firmware.patch in
openSUSE TW. (bsc#995059)(bsc#1094902) - update to 5.65:
* Fix issue with A2DP cache invalidation handling.
* Fix issue with A2DP and not initialized SEP codec.
* Fix issue with A2DP and multiple SetConfiguration to same SEP
* Fix issue with AVRCP and not properly initialized volume.
* Fix issue with SDP records when operating in LE only mode.
* Fix issue with HoG and not reading report map of instances.
* Fix issue with GATT server crashing while disconnecting.
* Fix issue with not removing connected devices.
* Fix issue with enabling wake support without RPA Resolution.
* Fix issue with pairing failed due to the error of Already Paired.
* Add support for CONFIGURATION_DIRECTORY environment variable.
* Add support for STATE_DIRECTORY environment variable.
* Add support for "Bonded" property with Device API.
* Add experimental support for ISO socket.
- drop bluez-test-2to3.diff (obsolete/upstream) - Upgrade bluez-test requirement of PyGObject from ancient version
2 to current version. (bluez/test is at least able to use it
since 2014) - Move the dbus-1 system.d file to /usr (bsc#1199207)
- Fix self-obsoletion issues
- Add supplements to cups subpackage
- Split zsh completion into subpackage
- Don't tell the user to write to /usr (in README-mesh.SUSE) - add Requires(post): systemd for bluez-auto-enable-devices
* fixes boo#1198906 - update to version 5.64:
This is another release mostly with bug fixes on HOG, GATT, A2DP,
Media, AVDTP, AVRCP, and scanning failure.
This release includes a fix for building with old glibc (< 2.25)
and other minor issues found with the static code analyzing tool.
ISO packet support is added to the emulator as a part of LE Audio
development.
- removed obsoleted 0002-Use-g_memdup2-everywhere.patch - Add code to restore user modifications for modprobe.d %config files
after moving the files to %_modprobedir
- Use %_modprobedir (jsc#SLE-20639) - update to version 5.63:
* Fix issue with storing IRK causing invalid read access.
* Fix issue with disconnecting due to GattCharacteristic1.MTU.
* Add support for Device{Found,Lost} of advertising monitoring. - Fixes for %_libexecdir changing to /usr/libexec (bsc#1174075) - Stop nuking the obex service, we support user systemd services
just fine now. Following this, no longer hack the dbus service,
leave it as a systemd service as upstream intended.
- Split out obex in own package with it's needed enabledment as a
systemd user service.
- Add 0001-obex-Use-GLib-helper-function-to-manipulate-paths.patch:
obex: Use GLib helper function to manipulate paths. Instead of
trying to do it by hand. This also makes sure that relative paths
aren't used by the agent. Patch from fedora. - update to version 5.62 (JIRA-SLE-18497):
* Fix issue with handling truncation when loading LTKs.
* Fix issue with accepting Exchange MTU on EATT bearer.
* Fix issue with clearing DeviceLost timers on power down.
* Fix issue with AVCTP browsing channel and missing ERTM.
* Fix issue with AVDTP and local SEID pool for each adapter.
* Add support for BR/EDR and LE connection failure reasons.
- drop obsoleted patch
0005-media-rename-local-function-conflicting-with-pause-2.patch - update to version 5.61 (JIRA-SLE-18497):
* Fix issue with A2DP while waiting for command response.
* Fix issue with A2DP when SetConfiguration fails.
* Fix issue with device removal handling.
* Fix issue with storing discoverable setting.
* Add support for Central Address Resolution characteristic.
* Add support for admin policy plugin. - add fedora's patches 0002-Use-g_memdup2-everywhere.patch and
0005-media-rename-local-function-conflicting-with-pause-2.patch
to fix compatibility problems with newer glib and glibc - fix bluez-auto-enable-devices subpackage (boo#1177845) - remove notification message from bluez-deprecated package.
I'm not going to remove it, and another maintainer can still
restart the removal process :-)
also boo#1188660 - update to 5.60 (JIRA-SLE-18497):
* Fix issue with reading from RFKILL device node.
* Fix issue with AVDTP and parsing capabilities.
* Fix issue with UnregisterApplication handling.
* Fix issue with RegisterProfile if UUID already exists.
* Fix issue with GATT client attribute read with offset.
* Fix issue with non-discoverable device and advertising monitor.
- remove bluez-5.59-0388794dc5fdb73a4ea.diff (included upstream) - add bluez-5.59-0388794dc5fdb73a4ea.diff, fixes a2dp on newly
paired devices, https://github.com/bluez/bluez/issues/157 - update to 5.59:
* Fix issue with string to UUID-32 conversion.
* Fix issue with connect request if SDP search failed.
* Fix issue with accepting invalid AVDTP capabilities.
* Fix issue with unregister handling of AVRCP player.
- new tool: mesh-cfgtest
- new manpages: btmon.1, bluetooth-meshd.8
- rebased bluez-test-2to3.diff - update to 5.58:
* Fix issue with usage of deprecated GLib functions.
- version 5.57:
* Fix issue with handling GATT notification PDU parsing.
* Fix issue with registering DIS without a valid source.
* Fix issue with removing remote SEPs when loading from cache.
- remove upstreamed
bluez-avdtp-Fix-removing-all-remote-SEPs-when-loading-from.patch - add bluez-avdtp-Fix-removing-all-remote-SEPs-when-loading-from.patch
Fix Bluetooth headphones disconnect periodically(bsc#1183821) - update to 5.56:
* Fix issue with setting AVDTP disconnect timer.
* Fix issue with AVDTP not sending GetCapabilities.
* Fix issue with AVDTP connecting using streaming mode.
* Fix issue with handling A2DP and remote SEP disappearing.
* Fix issue with handling session of A2DP channels.
* Fix issue with GATT and handling device removal.
* Fix issue with GATT not accepting multiple requests.
* Fix issue with HID report value callback registration.
* Add support for new advertising management command.
* Add support for battery D-Bus interface.
* removed obsolete bccmd - add bluez-test-2to3.diff to get rid of python2 dependency - Packaging: remove _service and accompanying README.md,
maintenance in git did not work out as well as intended. - update to 5.55:
* Fix issue with handling security level for HoG.
* Fix issue with handling HIDSDPDisable attribute.
* Fix issue with handling HID virtual cable unplug.
* Fix issue with handling HID channel disconnect order.
* Fix issue with handling AVDTP delay reporting states.
* Fix issue with handling AVRCP notification events.
* Fix issue with handling AVRCP list player attributes.
* Fix issue with handling AVRCP category 1 player settings.
* Fix issue with handling AVRCP media player passthrough bitmask.
* Fix issue with handling HFP 1.7 default features.
* Fix issue with handling GATT disconnecting handling.
* Fix issue with handling GATT database hash.
* Fix issue with handling service changed characteristic.
* Fix issue with handling read of multiple characteristic values.
* Fix issue with handling Just-Works auto-accept pairing.
* Fix issue with handling authentication of bonded devices.
* Fix issue with handling L2CAP streaming mode for AVDTP.
* Fix issue with handling SysEx parser for MIDI support.
* Fix issue with handling configured scan parameter values.
* Fix issue with handling temporary devices removal.
* Fix issue with handling advertising flags.
- remove input-hog-Attempt-to-set-security-level-if-not-bonde.patch,
input-Add-LEAutoSecurity-setting-to-input.conf.patch: upstream
- use autopatch, spec-cleaner - Add --enable-external-ell to actually make use of pkgconfig(ell). - Pull in python3 packages, the tests are py3 based so it does not
make sense to pull in py2 packages. - update to bluez-5.54:
* Fix issue with HOGP to accept data only from bonded devices.
* Fix issue with A2DP sessions being connected at the same time.
* Fix issue with class UUID matches before connecting profile.
* Add support for handling MTU auto-tuning option for AVDTP.
* Add support for new policy for Just-Works repairing.
* Add support for Enhanced ATT bearer (EATT).
- bluez-5.53:
* Fix issue with handling unregistration for advertisment.
* Fix issue with A2DP and handling recovering process.
* Fix issue with udpating input device information.
* Add support for loading blocked keys.
- remove obsolete upstreamed patches:
* HOGP-must-only-accept-data-from-bonded-devices.patch
* HID-accepts-bonded-device-connections-only.patch
- refresh other patches - Add
HOGP-must-only-accept-data-from-bonded-devices.patch
HOGP 1.0 Section 6.1 establishes that the HOGP must require
bonding.(bsc#1166751)(CVE-2020-0556)
HID-accepts-bonded-device-connections-only.patch
This change adds a configuration for platforms to choose a more
secure posture for the HID profile.(bsc#1166751)(CVE-2020-0556)
input-hog-Attempt-to-set-security-level-if-not-bonde.patch
Attempt to set security level if not bonded.
(bsc#1166751)(CVE-2020-0556)
input-Add-LEAutoSecurity-setting-to-input.conf.patch
Add LEAutoSecurity setting to input.conf.
(bsc#1166751)(CVE-2020-0556) - Fix path to systemctl in %post script - add NoSource tag for omitting README.md from src.rpm - move all deprecated tools into bluez-deprecated package which can
be disabled by prjconf in OBS.
- bluez-deprecated will go away before end of 2020 in Tumbleweed! - BuildIgnore shared-mime-info, pulled in by libgio-2_0-0, not
required for building, but causes a build loop.
- Add bcond for mesh, also enable mesh on Leap 15.2/SLE15SP2.
- Properly conditionalize all files which are only built with enabled
mesh functionality, fixes build on Leap 15.1 and earlier. - fix udev directory from %_libexecdir to %_prefix/lib - update to version 5.52:
* Fix issue with AVDTP session disconnect timeout handling.
* Mark media endpoint APIs as stable interfaces.
- remove obsolete 0001-mesh-Fix-segmentation-fault-on-Join-call.patch
- disable one more segfaulting patch - add 0001-mesh-Fix-segmentation-fault-on-Join-call.patch
(boo#1152672) - add _service to use github.com/seifes-obs-packages/bluez.git
as source for the package - Combine multiple %service_* to reduce generated boilerplate. - disable mesh service due to security concerns, see boo#1151518
- add README-mesh.SUSE to explain the issue
- remove no longer necessary temporary-rpmlintrc - update to version 5.51:
* Fix issue with first agent not being registered as default.
* Fix issue with loading devices without Service Changed CCC.
* Fix issue with GATT client and extended property reading.
* Fix issue with handling GATT client invalid read behavior.
* Fix issue with handling GATT disconnect handler removal.
* Fix issue with missing GATT/GAP service records for SDP.
* Fix issue with checking SDP continuation state length.
* Fix issue with HID device removal on HoG disconnect.
* Fix issue with AVDTP and session destroy handling.
* Fix issue with AVCTP and output MTU accounting.
* Fix issue with AVRCP and creating media items.
* Add support for GATT database caching feature.
* Add experimental support for Bluetooth Mesh Profile.
- removed obsoleted patches:
* 0001-obexd-use-AM_LDFLAGS-for-linking.patch
* 0001-policy-Add-logic-to-connect-a-Sink.patch
* 0001-tools-Fix-build-after-y2038-changes-in-glibc.patch (bsc#1156544)
* bluez-5.50-a2dp-backports.patch
* bluez-5.50-gcc9.patch
* disable_some_obex_tests.patch
* bluez-5.45-disable-broken-tests.diff
- add bluez-disable-broken-tests.diff
- add temporary rpmlintrc until security team approves - Fix build with GCC 9 (boo#1121404, bko#202213):
* Add bluez-5.50-gcc9.patch. - Fix 43xx firmware path for RPi3 bluetooth support (bsc#1140688)
- Add RPi-Move-the-43xx-firmware-into-lib-firmware.patch - Add 0001-tools-Fix-build-after-y2038-changes-in-glibc.patch: Fix
build after y2038 changes in glibc (bsc#1156544) - Add avinfo to bluez-test, useful for debugging.
- Only BuildRequires pkgconfig(ell) on Tumbleweed.
- Add bluez-5.50-a2dp-backports.patch: A2DP fixes for newer codecs
(upstream backport). - Connect Sink profile which HSP profile connects (boo#1131772).
- Add 0001-policy-Add-logic-to-connect-a-Sink.patch - install bluetoothd sample config file as %doc for reference - use gcc8 for now to work around boo#1121404 - add btmgmt to bluez-test - add btgatt-client to bluez-test - update to version 5.50:
- Fix issue with GATT and reading long values.
- Fix issue with GATT and reading multiple includes.
- Fix issue with GATT and service changes when offline.
- Fix issue with handling secondary service discovery.
- Fix issue with handling persistency of CCC values.
- Fix issue with handling Mesh session on disconnection.
- Fix issue with handling Mesh proxy PDU SAR message length.
- Fix issue with handling Mesh default heartbeat TTL value.
- Add support for Mesh node-reset operation handling.
- Add support for GATT authorization request handling.
- Add support for GATT minimum key size requirements.
- Add support for GATT server and included services.
- Add support for handling additional advertising data.
- Add support for handling separate discoverable state.
- Add support for enabling HFP version 1.7 features.
- Add support for dedicated Bluetooth logging daemon.
- remove 0001-Don-t-refresh-adv_manager-for-non-LE-devices.patch,
fixed upstream - Add
CVE-2016-9800-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch
* Fix hcidump memory leak in pin_code_reply_dump().
(bsc#1013721)(CVE-2016-9800)
CVE-2016-9804-tool-hcidump-Fix-memory-leak-with-malformed-packet.patch
* Fix hcidump buffer overflow in commands_dump().
(bsc#1013877)(CVE-2016-9804) - add 0001-Don-t-refresh-adv_manager-for-non-LE-devices.patch
(boo#1086731) - update to version 5.49:
This is mostly a bug fix release, with fixes to features such as
AVCTP, OBEX, GATT and Mesh. There are however some notable new
features also, such as improved heartbeat management support in
meshctl as well as a new experimental ConnectDevice D-Bus method
on the Adapter interface, which can be used for quick device
object creation for testing purpose or when information about the
device has been received over some Out-of-Band channel.
- remove 0001-core-Fixes-order-InterfaceAdded.patch (upstream) - add 0001-core-Fixes-order-InterfaceAdded.patch (boo#1076898)(boo#1101119)
- fix python shebang rpmlint warning for bluez-test - Add disable_some_obex_tests.patch bypass boo#1078285 for PowerPC - update to version 5.48:
This release brings many fixes and feature enhancements.
Some notable enhancements include support for devices with the
BLE battery service, as well as improved Mesh support in the
meshctl tool. Several previously experimental D-Bus APIs have now
been marked as stable, notably the Advertising Manager API as
well as the AquireWrite & AquireNotify GATT APIs.
As far as fixes go, these can be found in many areas of the stack,
including A2DP, AVCTP, device discovery, Mesh, and GATT. - add 0001-obexd-use-AM_LDFLAGS-for-linking.patch
- document systemd dependency during %post - update to version 5.47:
This release contains various fixes to GATT, A2DP and BR/EDR vs
LE bearer handling. There’s also a notable SDP fix for CVE-2017-
1000250 (part of the recently announced BlueBorne vulnerabilities).
Feature-wise, there’s now support for adding the appearance and
local name to advertising data through the Advertising D-Bus
interface. The btmon tool is now also able to better decode most
Bluetooth 5.0 HCI commands and events.
The Bluetooth Mesh Profile specification was released recently,
and this BlueZ release comes with initial support for it in the
form of a new meshctl tool. Using this tool it’s possible to
provision mesh devices through the GATT Provisioning Bearer
(PB-GATT), as well as communicate with them (e.g. configure them)
using the GATT Proxy protocol. - update to version 5.46:
* Fix issue with handling ATT over BR/EDR connections.
* Fix issue with SDP browsing cleanup after connection.
* Fix issue with pointer dereference and OPP Put request.
* Fix issue with identity address updates during pairing.
* Fix issue with not removing services that had disappeared.
* Add support for improved discovery of included services.
* Add support for simplified characteristics discovery.
* Add support for GATT caching configuration option.
* Add experimental support for AcquireWrite and AcquireNotify. - enable sixaxis plugin - Add %post/%postun to bluez-auto-enable-devices so the settings
change takes effect (boo#1039476) - add bluez-auto-enable-devices subpackage with main.conf which
auto-enables all devices (boo#1039476) - add bluez-5.45-disable-broken-tests.diff to disable two broken
tests (reported upstream but not yet fixed) - update to version 5.45:
This is mostly a bugfix release with fixes in ATT, GATT, OBEX
and AVDTP.
Feature-wise there are some new things as well, such as btmon
support decoding Bluetooth 5.0 HCI commands and events. - make testsuite run non-parallel (it has problems with running
parallel checks) and quiet - update to version 5.44:
Most fixes are LE (specifically GATT) related, however some other
areas are affected as well.
Feature-wise, there’s a new MIDI plugin and support for using
single-mode (LE-only) controllers that lack a public address.
E.g. any nRF5x controller running a MyNewt or Zephyr based
firmware falls into this category.
- packaging: add "--enable-midi", "--enable-deprecated"
TODO: package deprecated tools into separate package to prepare
removal some time in the future
- rebase bluez-cups-libexec.patch - Set the cupsdir directly with patch instead of mv and seds:
* bluez-cups-libexec.patch
- Replace requirements by the pkgconfig counterparts
* this should solve out the problem with builcycle on Factory
- Ran over with spec-cleaner - update to version 5.43:
This is almost purely a bug-fix release with fixes to HoG, ATT
and PAN. There’s also a fix for a regression in 5.42 that caused
connection failures for external profiles like OBEX.
Feature-wise there’s one notable addition: LE privacy. By
enabling this in main.conf it’s now possible to make BlueZ
generate a local Identity Resolving Key (IRK) and use Resolvable
Private Addresses (RPAs) for itself. - update to version 5.42:
The major API change with this release is that the GATT D-Bus API
is no longer marked as experimental.This should hopefully
encourage the creation of more applications using it. Feature-
wise, btmon received support for decoding full mgmt message
traces - a feature that is available in the bluetooth-next kernel
tree, i.e. on its way to the 4.9 kernel release. In addition to
these changes, this release contains also fixes in areas such as
PBAP, transport selection (BR/EDR vs LE), ATT and A2DP. - Update descriptions a bit. Adjust RPM groups for what is used
in openSUSE normally. Drop archaic %clean section.
Drop --with-pic which is only for (unbuilt) static libs. - update to version 5.41:
BlueZ 5.41 is purely a bug-fix release targeting areas such as
GATT, AVRCP, OBEX and device discovery filters. The GATT D-Bus
API is now starting to be stable enough that this will likely be
the last release where it is flagged as experimental.
- fix build with older distributions that don't have %_userunitdir
ins systemd-rpm-macros - Don't require systemd-devel but systemd-rpm-macros (bsc#983167)
Bluez simply needs to know where the systemd default paths are, at
build time. For that there's no need to build-require systemd or
systemd-devel (and pull all theirs dependencies). Instead
build-require systemd-rpm-macros, which has much less dependencies. - update to version 5.40:
This is mostly a bug fix release fixing issues with GATT, paired
devices and connection handling (particularly for accepting
connections through the Profile D-Bus interface).
One new feature is the ability to use btmon for reading HCI logs
from a TTY device. Right now the creation of this kind of logs is
available with Zephyr in the
form of a special console logging mode (more information
available here
https://www.zephyrproject.org/doc/board/arduino_101_ble.html#getting-hci-traces>).
The format of the protocol is a slight modification of what btmon
normally receives from the kernel monitor sockets, and is
documented in doc/btsnoop.txt). - update to version 5.39:
This is almost entirely a bug fix release with important fixes to
GATT, HoG, AVRCP & A2DP.
- install gatttool, needed for bluetooth 4.0 devices (boo#970628) - update to version 5.38:
This release has lots of updates and fixes to the GATT D-Bus API.
It should be working considerably better now. A key change to the
GATT D-Bus API is that it is now fully conforming to the word of
the D-Bus Object Manager specification. Instead of registering
each service individually with an Object Manager interface per
service path, all application services are now grouped together
through a single RegisterApplication call. The details can be
found in gatt-api.txt. Besides the D-Bus API change there are
also numerous fixes to GATT functionality in general.
Other areas that received fixes in this release are OBEX, AVRCP
and 128-bit UUID handling. Feature-wise there isn’t anything
groundbreaking, but a notable update is support for the Start
Limited Discovery command in the btmgmt tool (this feature
debuted with the 4.5 kernel release).
* Fix issue with stack overflow and UUID handling.
* Fix issue with ObjectManager interface and GATT.
* Fix issue with GATT database and error handling.
* Fix issue with GATT client notifications.
* Fix issue with GATT object ordering.
* Fix issue with GATT default MTU exchange.
* Fix issue with device attribute clearing.
* Fix issue with AVRCP capabilities request. - update to version 5.37:
* Fix issue with registering external profiles.
* Fix issue with connecting external profiles.
* Fix issue with GATT service changed handling.
* Fix issue with not emitting GattServices update.
* Convert to unified HID over GATT profile support.
* Convert to KeyboardDisplay as default IO capability.
* Install btattach utility by default. - update to version 5.36:
This release consists for the most part of bug fixes that target
areas such as PBAP, AVRCP and GATT.
Feature-wise a notable change is btmon support for vendor
diagnostic messages which will be debuting with the 4.4 Linux
kernel release. This feature will allow e.g. LMP tracing with
specific controllers. For now there is preliminary support for
Intel and Broadcom based controllers.
- update dbus-devel buildrequires from configure.ac
- remove obsolete bluez-no-duplicate-test-names.patch - update to version 5.35:
This release contains bugfixes to areas such as GATT, OBEX, HoG
and AVRCP. From now on bluetoothd will cache more information of
remote GATT databases and thereby avoid unnecessary rediscovery
of remote services.
A noteworthy new feature is the ability to configure bluetoothd
to automatically enable (power on) all new adapters. One use of
this is to replace unreliable "hciconfig hci0 up" commands that
some distributions use in their init/udev scripts. The feature
can be enabled by having "AutoEnable=true" under the "[Policy]"
section of /etc/bluetooth/main.conf - Add bluez-no-duplicate-test-names.patch: Fix test suite when
running against GLIB 2.45.x (test names are not to be used
duplicated). - update to version 5.34:
This release fixes a fairly important bug for the GATT D-Bus
interface where automatic reconnections would not always occur
for the client role. There’s also a fix for a missing attribute
in PBAP & MAP SDP records as well as a couple of audio related
fixes. A new feature in this release is Media Player Selection
support for the Target role of AVRCP (the Controller role already
had this). - update to version 5.33:
This release contains mostly bugfixes, particularly in areas such
as the audio plugin, GATT and OBEX. The main feature additions
are in the the emulator code which received improvelents to LE
features. There’s also a new tool for testing the recently
released Eddystone protocol from Google. - update to version 5.32:
This is mostly a bug fix release rather than including many new
features. The fixes fall in several different areas, including
OPP, ATT and advertising (instance number handling in
particular). There’s also a fix for handling a sudden disconnect
when a connection setup process hasn’t yet completed. The one
notable feature this release has is the ability to select between
letting the stack handle ATT security elevation or doing the
respective error handling in higher layers. - update to version 5.31
Fixes to many different areas, including networking, GATT, HID,
A2DP and AVRCP. Feature-wise we’ve got support for security flags
for the GATT database, allowing fine-grained security level
control for D-Bus clients using the GATT D-Bus API. We’ve also
got a new experimental device discovery filter interface which
allows filtering for a specific remote service, RSSI threshold
or transport (LE vs. BR/EDR). Another new experimental interface
is for LE advertising, which also brings the LE peripheral role
closer to feature completion on a D-Bus level
- remove obsolete bluez-5.30-disable-broken-tests.diff - update to version 5.30
The highlight of this release is the completion of the GATT D-Bus
APIs. We’ve now got both the client and server functionality in
place, however it’s still behind the -E (--experimental) command
line switch. The API is documented in doc/gatt-api.txt and there
are several test tools for it in the tree (even bluetoothctl has
support for it). Another new (and still experimental) D-Bus API
that debuts with this release is one for managing LE Advertising,
i.e. acting in peripheral role. The API is documented in
doc/advertising-api.txt.
Besides the new features, there are several fixes to AVCTP, AVDTP
& AVRCP. There’s also a fix for C++ compiler compatibility with
the library headers as well as a fix for device information not
being stored in certain corner cases.
- add bluez-5.30-disable-broken-tests.diff to fix test suite
- remove -fstack-reuse=none workaround
- remove 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch - Build the testsuite with -fstack-reuse=none to workaround broken
test setup. [bnc#923768] - update to version 5.29
This is a comparatively large release with over a month and 475
commits since 5.28. There have been lots of fixes to the Android
side. Our internal GATT library (used both by ‘normal’ BlueZ as
well as the Android version) received lots of updates for this
release. Other notable changes are a fix for AVCTP key repeat
timeout as well as added support for the Multi Profile
Specification (MPS).
- add 20150312-PATCH_BlueZ_shared_gatt-client_Fix_invalid_read-56974.patch
from bluez-devel for fixing test case failure (will be included in
next bluez release) - update to version 5.28
Here’s the first BlueZ release in 2015. Most of the changes since
the last one are bug fixes, but there’s actually quite many of
them this time, including:
* Fixes to GATT service discovery & probing
* Fix for bearer selection with dual-mode devices
* Fix potential crash when removing devices
* Fix issue with incomplete names in EIR data
* Fix parsing GATT name characteristics
* Fix AVCTP long press & key repetition handling
* Fixes for GATT notification handling
Besides bug fixes we’ve now also got more extensive unit tests
for new GATT code as well as better HCI decoders in btmon for
some less used 4.1 and 4.2 features. The hid2hci tool gained
support for CSR 8510 A10 devices and the hex2hcd tool received a
complete rewrite with better command handling. - update to version 5.27
Here comes the traditional x-mas release!
BlueZ 5.27 consists mostly of bug fixes to areas such as GATT
and mgmt (the interface through which bluetoothd talks to the
kernel). The emulation framework has also received many new
features, paving the way for more extensive test automation. - update to version 5.26
This release is for the most part a bug-fix release with fixes in
A2DP and OBEX related functionality, but there’s also an added
features for get/set reports for HID over GATT as well as
Phonebook Access Profile 1.2 support
The Bluetooth 4.2 specification went public in early December and
BlueZ 5.26 is the first release with support for its features.
Perhaps the most notable one of these is Low Energy Secure
Connections which will require a 3.19 or newer kernel. This
feature brings LE pairing to the same level of security as it has
been for BR/EDR. LE SC also brings along with it so-called
cross-transport pairing, which means that you only need to pair
once over LE or BR/EDR to get the necessary keys for both
transports between two dual-mode devices. - update to version 5.25
This release contains various improvements to MAP and PBAP
support. There are also various GATT related fixes. We’ve also
got a fix for a race condition which could occasionally cause LE
connection/pairing failures. The fix will work for kernels from
3.13 onward (for older kernels a proper fix isn’t really feasible).
- packaging: remove obsolete README.SUSE and README.packagers /bin/sh /bin/sh /bin/sh /bin/sh bluez-audio bluez-hcidump bluez-utils obexd-client s390zl39 1709548490
! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G 5.65-150500.3.11.1 5.65-150500.3.11.1 3.36 5.65 3.36 5.65 3.36 5.0 3.36 5.0
modprobe.d 50-bluetooth.conf bluemoon bluetoothctl btattach btmon hex2hcd isotest l2ping mesh-cfgclient mesh-cfgtest meshctl mpris-proxy bluetooth bluetooth-meshd bluetoothd bluetooth-mesh.service bluetooth.service udev hid2hci rules.d 97-hid2hci.rules bluetooth plugins sixaxis.so org.bluez.service bluetooth.conf bluez AUTHORS ChangeLog README README-mesh.SUSE bluetooth-mesh.conf bluez.changes.sle dbus-apis adapter-api.txt advertising-api.txt agent-api.txt assigned-numbers.txt btsnoop.txt device-api.txt gatt-api.txt health-api.txt input-api.txt media-api.txt mgmt-api.txt network-api.txt obex-agent-api.txt obex-api.txt pics-opp.txt pixit-opp.txt profile-api.txt pts-opp.txt sap-api.txt settings-storage.txt supported-features.txt test-coverage.txt test-runner.txt main.conf org.bluez.mesh.service bluez COPYING btattach.1.gz btmon.1.gz hid2hci.1.gz isotest.1.gz l2ping.1.gz rctest.1.gz bluetooth-meshd.8.gz bluetoothd.8.gz bluetooth /lib/ /lib/modprobe.d/ /usr/bin/ /usr/lib/ /usr/lib/bluetooth/ /usr/lib/systemd/system/ /usr/lib/udev/ /usr/lib/udev/rules.d/ /usr/lib64/ /usr/lib64/bluetooth/ /usr/lib64/bluetooth/plugins/ /usr/share/dbus-1/system-services/ /usr/share/dbus-1/system.d/ /usr/share/doc/packages/ /usr/share/doc/packages/bluez/ /usr/share/doc/packages/bluez/dbus-apis/ /usr/share/licenses/ /usr/share/licenses/bluez/ /usr/share/man/man1/ /usr/share/man/man8/ /var/lib/ -fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -g obs://build.suse.de/SUSE:Maintenance:32852/SUSE_SLE-15-SP5_Update/e59188b6ac3b92862ac61cc5ed06c39b-bluez.SUSE_SLE-15-SP5_Update drpm xz 5 s390x-suse-linux
directory ASCII text ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=d7c0936b0a8b5bd0aa5daabb323a3b164996fcb0, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=311c0692179544f03dfd127a0ce31ce2932a8cd6, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=ea4119df68f2cf5f7912259150f3a77c399552f1, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=ca266a062d774ced8f3fbf2a3999c4eef6df5b7c, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=b3ac45787a9ae5b15ef253531a6ef8d3751fbcaf, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=01c56cc2691db808a5cf13ac68912a810fb8729e, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=19b5cb9a6fcc30c6bcde444a3773f0a349e913c3, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=8599cbb6b7f56fd81b5b83c25004e04e632741e0, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=6ed37573923ad8a8c5a4f335e39e0f515bb988e5, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=7d9acc57901e9d3ae09dd149124e5e71efa2eb70, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=a9177b7b8afcc8bed8da80197d2ef456f93fc9d9, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=533b20ef6c3c0c135c2f5d7ba879a2b928af82b3, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=33c3733a17a76993554d9796610fb418f6934fb3, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, interpreter /lib/ld64.so.1, BuildID[sha1]=83a2cc13c8be20b33b77723e20b44ac2a28b5ca7, for GNU/Linux 3.2.0, stripped ELF 64-bit MSB shared object, IBM S/390, version 1 (SYSV), dynamically linked, BuildID[sha1]=dfdec85aee1eaca774dbf9521d0f81787fd7a165, stripped exported SGML document, ASCII text UTF-8 Unicode text C source, ASCII text troff or preprocessor input, ASCII text (gzip compressed data, max compression, from Unix) . 3 9 > N Z g m |
R R R
R R R R R R R
R R R R R R R R R R R R R R
R R R R R R R R R R R R
R R R R R R R R R R R R R R R R R R R
R R R R R R R R R R
R R R R R R
R R R R R R R R R R R R R R R
R R R R R
R R R R R R R R R R R R R R R R R R R R R
R R R R R R
R R R R R R R R R
R R R R
R R R R R R R R R R R R R R R R R R R R R ̥Z(>I4d U# Migration of modprobe.conf files to _modprobedir
for _f in 50-bluetooth.conf; do
[ ! -f "/etc/modprobe.d/${_f}.rpmsave" ] || \
mv -fv "/etc/modprobe.d/${_f}.rpmsave" "/etc/modprobe.d/${_f}" || :
done /bin/sh sbc utf-8 0a6ea89b8ff6da1173a72c71d27845b3f1a270f9035aae28a3644397ca244c81 ? 7zXZ
! t/] "k%jU7}R]RW;źX`` wfw\o-sϙZ"UP3k}$oP$I. E81+w<z<4ڨ),\/)uPP5D9 L{^$bt@BZp@&5%cPAsg(S:k6X|@gY Sp.'×(QHp nb}9*A GSZXWGWQ(tnB2N)(ز5 w#0 !;`Yܪ I^79)Lb[&
(EC d^,wֆ)~]%d>RkhW3DCkLe?Mcm~So$Dp 3'2_5!TR h
!iҶn J| \ w/zש1M{, 3d墢sϥ1iX xӞ{a:jfP 4xCP X37KЖeuWq"v bJ Ltz6i.g2+S?cRE{ν
.7b qZ2I[ 9$͌/r 5 <#~7 tӐ14 >Agj).beYRfl(, pJxbDV~|u3mp>ۥF!PTc菏jCj: 5TTV[>uH4j~".ay-yAr`R씁baO3)CR!ھ!zD0@C$t3
/{g>Z<KdҊ ʐ163~j3&4[w7@\)$?
Zls/I[J]'OLLq.6bo .\Ow,l~8xD"Θ u,;Dt4wUcE{~H,X,ǤFg92 ަJܼ ūo:/'[ Dt*Hsmkt`5I얅"~SUE9*uW.U,ZqSgW7lYT_;V<0>F x0omf9=HDWXA RH40?Nb HpoBn75!L0'mFJ09nǹپ'!.\^{GJO2:hQRl%yq%J0k/nAvG~6 jB_-Zv>6~#Ddv*!ȫ`o>=Mj| cEbNOW=?ђ ctc>Ouw opciqOBwv ~!
ƴv q xDmO#pdf՞yO1JDjЪ&%v1pSע,4FF/Dt1<2G`
RѼYuҸ
%QL)wrkMV_n Fe(0&16m_Gt{\Y8x1}̓3 (o5uR]Kt4Q|k#i ,sRMruHt'[RlB55P|HQC w=t"C'@P !