Package: flashrom Version: 9.0.0-cros-R119-1 Architecture: arm64 Maintainer: Debian EFI Installed-Size: 870 Depends: libc6 (>= 2.34), libftdi1-2 (>= 1.2), libjaylink0 (>= 0.3.1), libpci3 (>= 1:3.8.0), libusb-1.0-0 (>= 2:1.0.22) Filename: arm64/flashrom_9.0.0-cros-R119-1_arm64.deb Size: 168520 MD5sum: ebf71bbf21cdd2e20e48778ffb45ceaf SHA1: 8e0d5b00a4751230b86d9cda6ce321ebfaac9e13 SHA256: 84db1c57d166cfb7598be1e2bb0f184839331bdc21b9733e074631a163c86b25 Section: electronics Priority: optional Homepage: http://www.flashrom.org Description: Identify, read, write, erase, and verify BIOS/ROM/flash chips flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips. . It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. . The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images. . It can also be used to read the current existing BIOS/firmware from a flash chip. . Currently supported programmers include: . * internal (for in-system flashing in the mainboard) * dummy (virtual programmer for testing flashrom) * nic3com (for flash ROMs on 3COM network cards) * nicrealtek (for flash ROMs on Realtek and SMC 1211 network cards) * nicnatsemi (for flash ROMs on National Semiconductor DP838* network cards) * nicintel (for parallel flash ROMs on Intel 10/100Mbit network cards) * gfxnvidia (for flash ROMs on NVIDIA graphics cards) * drkaiser (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards) * satasii (for flash ROMs on Silicon Image SATA/IDE controllers) * satamv (for flash ROMs on Marvell SATA controllers) * atahpt (for flash ROMs on Highpoint ATA/RAID controllers) * atavia (for flash ROMs on VIA VT6421A SATA controllers) * atapromise (for flash ROMs on Promise PDC2026x ATA/RAID controllers) * it8212 (for flash ROMs on ITE IT8212F ATA/RAID controller) * ft2232_spi (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family based USB SPI programmer), including the DLP Design DLP-USB1232H, FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP, Google Servo v1/v2, and FIC OpenMoko Neo1973 Debug board. * serprog (for flash ROMs attached to a programmer speaking serprog), including AVR flasher by Urja Rannikko, AVR flasher by eightdot, Arduino Mega flasher by fritz, InSystemFlasher by Juhana Helovuo, and atmegaXXu2-flasher by Stefan Tauner. * buspirate_spi (for SPI flash ROMs attached to a Bus Pirate) * dediprog (for SPI flash ROMs attached to a Dediprog SF100) * rayer_spi (for SPI flash ROMs attached to a RayeR parport based programmer) * pony_spi (for SPI flash ROMs attached to a SI-Prog serial port bitbanging adapter) * nicintel_spi (for SPI flash ROMs on Intel Gigabit network cards) * ogp_spi (for SPI flash ROMs on Open Graphics Project graphics card) * linux_spi (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux) * usbblaster_spi (for SPI flash ROMs attached to an Altera USB-Blaster) * nicintel_eeprom (for SPI EEPROMs on Intel Gigabit network cards) * mstarddc_spi (for SPI flash ROMs accessible through DDC in MSTAR-equipped displays) * pickit2_spi (for SPI flash ROMs accessible via Microchip PICkit2) * ch341a_spi (for SPI flash ROMs attached to WCH CH341A) Package: flashrom-dbgsym Source: flashrom Version: 9.0.0-cros-R119-1 Auto-Built-Package: debug-symbols Architecture: arm64 Maintainer: Debian EFI Installed-Size: 619 Depends: flashrom (= 9.0.0-cros-R119-1) Filename: arm64/flashrom-dbgsym_9.0.0-cros-R119-1_arm64.deb Size: 558476 MD5sum: 888b807eb6b254a5e0be6d82ae1c6599 SHA1: 5c3867c5ee55dde5af4e6323f364ee81c4a9343b SHA256: b2909f43e0f09e3e660f10add9f0ad1405c83512d2bedf2bda5b38fae52fcdd2 Section: debug Priority: optional Description: debug symbols for flashrom Build-Ids: 488708c8ddde690e31def2574b0eed991fda1e52 Package: libflashrom-dev Source: flashrom Version: 9.0.0-cros-R119-1 Architecture: arm64 Maintainer: Debian EFI Installed-Size: 44 Depends: libflashrom1 (= 9.0.0-cros-R119-1) Filename: arm64/libflashrom-dev_9.0.0-cros-R119-1_arm64.deb Size: 9084 MD5sum: 2ee1e8ad5b5a52193fdd5502285ac996 SHA1: 8c23e0a80ef1208b5800b7d619ba360b627f42ce SHA256: 4c2e36d7bb41b15f933492b27df17cc2d7a418040f5c4ae7a94b1c70c8e1a879 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://www.flashrom.org Description: BIOS/ROM/flash chips - development files flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips. . It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. . The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images. . It can also be used to read the current existing BIOS/firmware from a flash chip. . This package provides flashrom header development files. Package: libflashrom1 Source: flashrom Version: 9.0.0-cros-R119-1 Architecture: arm64 Maintainer: Debian EFI Installed-Size: 858 Depends: libc6 (>= 2.33), libftdi1-2 (>= 1.2), libjaylink0 (>= 0.3.1), libpci3 (>= 1:3.8.0), libusb-1.0-0 (>= 2:1.0.22) Filename: arm64/libflashrom1_9.0.0-cros-R119-1_arm64.deb Size: 152944 MD5sum: 7e52a84980ca68ea3dd4481194ac3bf0 SHA1: f4eeecd36ed59daa57e1d656c37ca049d1db28db SHA256: 7a4dff6c1518ff4ad6f92da0db4e3416a51a799f5ee3d82884b2abcf9f770abe Section: libs Priority: optional Multi-Arch: same Homepage: http://www.flashrom.org Description: Identify, read, write, erase, and verify BIOS/ROM/flash chips - library flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips. . It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. . The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images. . It can also be used to read the current existing BIOS/firmware from a flash chip. . This package provides flashrom library development files. Package: libflashrom1-dbgsym Source: flashrom Version: 9.0.0-cros-R119-1 Auto-Built-Package: debug-symbols Architecture: arm64 Maintainer: Debian EFI Installed-Size: 594 Depends: libflashrom1 (= 9.0.0-cros-R119-1) Filename: arm64/libflashrom1-dbgsym_9.0.0-cros-R119-1_arm64.deb Size: 535368 MD5sum: cf3018869bd3416ab507c5d36e0fe088 SHA1: 3085ef1f67799cc590a47be65624b4b4128b2ade SHA256: 0029f0be53981518cdd3858119724e4e9b610aae1eab801273bfb62a6f3bbb9b Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libflashrom1 Build-Ids: fbeb6dca72bfd150f215c4459ac757a3dda596e4 Package: linux-firmware-corsola Version: 0.1-1 Architecture: all Maintainer: Wei Mingzhi Installed-Size: 6352 Filename: all/linux-firmware-corsola_0.1-1_all.deb Size: 1782664 MD5sum: f8fe23d5fe93fb9de73f6120e021cd6e SHA1: 85d470b81b7129e900b90e00f5b47b7071e3f755 SHA256: 6fc47f1e0825c0ac17d90f037c70ef0cc69992b7a9b770ba26844a112d204f87 Section: non-free-firmware/kernel Priority: optional Homepage: http://www.kernel.org/ Description: Linux kernel Firmware, version 6.1-corsola This package contains the Linux kernel Firmware.