Package: apt-conf-vnx Version: 1.0 Architecture: all Maintainer: PICCORO Lenz McKAY Installed-Size: 108 Depends: lsb-release, gnupg, apt Conflicts: apt-conf-aptitude, apt-conf-sidux, apt-conf-venenux, massenkoh-archive-keyrings, massenkoh-keyrings, venenux-piccoro-keyrings Replaces: apt-conf-aptitude, apt-conf-sidux, apt-conf-venenux, mintsystem Provides: apt-conf-aptitude, apt-conf-sidux, apt-conf-venenux, debian-archive-repositories, debian-repositories, mintsystem, venenux-devel-repositories, venenux-piccoro-keyrings, venenux-repositories Filename: all/apt-conf-vnx_1.0_all.deb Size: 14112 MD5sum: 6e8318ad57dfb1dfca872c4b9052018d SHA1: 164a457416178533e033aea5279b1c9080f7a9c6 SHA256: 3186a5dcec1700e422066d8a3dae8ae1ae499dc21877ff946d2a4f8b97fbf551 Section: admin Priority: important Description: preferencias iniciales para sistema de paquetes de software VenenuX This added default sources repository and configs for aptitude software package system. Esto agrega preferencias iniciales y onfiguraciones para aptitude el sistema de paquetes de programas. . Venenux emplea como sistema de paquetes de software y programas el programa aptitude, que maneja en una interfaz tanto de comandos como interfaz de usuario las relaciones y registros del software por medio de los paquetes debian. Es el mejor sistema de manejo de software en Debian y es el oficial para VenenuX. . Este paquete hace lo siguiente: * establece configuraciones para el sistema de paqueteria, impidiendo que usuarios inexpertos instalen mucha basura que perjudicaria el soporte. * prioritiza la instalacion de software de paquetes desde los repositorios ya actualizados de venenux, para las versiones tanto viejas como nuevas * agrega la llaves de trabajo de paqueteria, que permiten verificar y autenticar el software de nuestros desarrolladores. * agrega por defecto repositorios especiales, comunes para todas las distribuciones y para todas las versiones de venenux dado asi paquetes al dia a estas. * agrega repositorios estables de backports como repositorios normales ya que estos poseen paquetes mas actuales en la rama estable de debian * fuerza la nuevas configuraciones desde lo paquetes de lo repositorios, esto significa que si un novato intenta actualizar un servidor, perdera su configuracion dado que los paquetes nuevos pueden diferir en configuraciones establecemos la nuevas siempre. . En debian apt es un sistema demasiado facilista que no permite una buena administracion. apt 0.7 se convirtio en aptitude y con este paquete se devuelve su antiguo funcionamiento. apt 0.7 basically transforms apt into aptitude, revert to traditional apt behaviour as far as that is possible by disabling, among others, the automatic installation of recommends (and suggests), as well as disabling and hiding the autoremove functionality. Package: autoconf Version: 2.68-1 Architecture: all Maintainer: Ben Pfaff Installed-Size: 2268 Depends: perl (>> 5.005), m4 (>= 1.4.13), debianutils (>= 1.8) Recommends: automake | automaken Suggests: autoconf2.13, autoconf-archive, gnu-standards, autoconf-doc, libtool, gettext Conflicts: autoconf2.13 (<< 2.13-47), gettext (<< 0.10.39), pkg-config (<< 0.25-1.1) Filename: all/autoconf_2.68-1_all.deb Size: 4695070 MD5sum: 82fbf36e6a81e917442bf5b483a0d618 SHA1: 3e47162ff1767bb2b0a5f3c4629f7f787b7ffb2c SHA256: 9c6d7e5ddb419f1a12255859854bbd7445800b8ee6bf14b3e0b5ffc0aa3c7578 Section: devel Priority: optional Homepage: http://www.gnu.org/software/autoconf Description: automatic configure script builder The standard for FSF source packages. This is only useful if you write your own programs or if you extensively modify other people's programs. . For an extensive library of additional Autoconf macros, install the `autoconf-archive' package. . The Debian project regards the full documentation for autoconf to be non-free, so it is not included in Debian. Nevertheless, the non-free distribution that accompanies Debian includes the manual in its `autoconf-doc' package. . This version of autoconf is not compatible with scripts meant for Autoconf 2.13 or earlier. If you need support for such scripts, you must also install the autoconf2.13 package. Package: automake Source: automake1.11 Version: 1:1.11.6-2vnz2 Architecture: all Maintainer: Eric Dorland Installed-Size: 1876 Depends: autoconf (>= 2.62), autotools-dev (>= 20020320.1), dpkg (>= 1.15.4) | install-info Conflicts: automake (<< 1:1.4-p5-1), automake1.10-doc, automake1.5 (<< 1.5-2), automake1.6 (<< 1.6.1-4) Provides: automake1.11, automaken Filename: all/automake_1.11.6-2vnz2_all.deb Size: 3088608 MD5sum: aaac893dbf09e3e78d938460f1524309 SHA1: 6682091a06f122e8674e141d1963ea301f5948a4 SHA256: 8c0caefd5fc81d6ec259c3e496703513b79d1ab98f5071019c0980b3b093e0b0 Section: devel Priority: optional Homepage: http://www.gnu.org/software/automake/ Description: Tool for generating GNU Standards-compliant Makefiles Automake is a tool for automatically generating `Makefile.in's from files called `Makefile.am'. . The goal of Automake is to remove the burden of Makefile maintenance from the back of the individual GNU maintainer (and put it on the back of the Automake maintainer). . The `Makefile.am' is basically a series of `make' macro definitions (with rules being thrown in occasionally). The generated `Makefile.in's are compliant with the GNU Makefile standards. . Automake 1.11 fails to work in a number of situations that Automake 1.4, 1.6, 1.7, 1.8, 1.9 and 1.10 did, so has been renamed so that the previous version can continue to be made available. Package: bison Version: 1:2.4.1.dfsg-3vnz1 Architecture: amd64 Maintainer: Chuan-kai Lin Installed-Size: 1812 Depends: m4, libc6 (>= 2.7-1) Suggests: bison-doc Filename: amd64/bison_2.4.1.dfsg-3vnz1_amd64.deb Size: 579360 MD5sum: 6f69e4d2bfc8bb0e45f7c7c428ddce62 SHA1: dacf805827e0ea85b29af1a4318c8e83096d9a5d SHA256: e9c00987884a169d19515195272d1af0a96460989b3800e3baba512f45a35940 Section: devel Priority: optional Homepage: http://www.gnu.org/software/bison/ Description: A parser generator that is compatible with YACC Bison is a general-purpose parser generator that converts a grammar description for an LALR(1) context-free grammar into a C program to parse that grammar. Once you are proficient with Bison, you may use it to develop a wide range of language parsers, from those used in simple desk calculators to complex programming languages. . Bison is upward compatible with Yacc: all properly-written Yacc grammars ought to work with Bison with no change. Anyone familiar with Yacc should be able to use Bison with little trouble. Documentation of the program is in the bison-doc package. Package: bison Version: 1:2.4.1.dfsg-3vnz1 Architecture: i386 Maintainer: Chuan-kai Lin Installed-Size: 1772 Depends: m4, libc6 (>= 2.7-1) Suggests: bison-doc Filename: i386/bison_2.4.1.dfsg-3vnz1_i386.deb Size: 554130 MD5sum: 0e37fd76a51264b601e3d0f5f69f3408 SHA1: 53b7f9cfc3d049c668730efb116a23b17124ec5e SHA256: 1f4edc46a52958aa259c19b8edd1979ef2caa8e378112d806191bc6a46c58306 Section: devel Priority: optional Homepage: http://www.gnu.org/software/bison/ Description: A parser generator that is compatible with YACC Bison is a general-purpose parser generator that converts a grammar description for an LALR(1) context-free grammar into a C program to parse that grammar. Once you are proficient with Bison, you may use it to develop a wide range of language parsers, from those used in simple desk calculators to complex programming languages. . Bison is upward compatible with Yacc: all properly-written Yacc grammars ought to work with Bison with no change. Anyone familiar with Yacc should be able to use Bison with little trouble. Documentation of the program is in the bison-doc package. Package: bsdcpio Source: libarchive Version: 2.8.5-5 Architecture: amd64 Maintainer: Debian Libarchive Maintainers Installed-Size: 288 Depends: libarchive1 (= 2.8.5-5), libacl1 (>= 2.2.11-1), libattr1 (>= 2.4.41-1), libbz2-1.0, libc6 (>= 2.7-1), liblzma2, libxml2 (>= 2.6.27), zlib1g (>= 1:1.1.4) Suggests: bsdtar Filename: amd64/bsdcpio_2.8.5-5_amd64.deb Size: 128666 MD5sum: 580cc454461926182deccf925ec6671a SHA1: 2f9482418c4f887908b894a31c02f144437719cc SHA256: e6f6d4a9da395f81c45526de5769c7d621a34fe27f37c4a3500aeebcff75d4c7 Section: utils Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Implementation of the 'cpio' program from FreeBSD The bsdcpio program is the default system 'tar' program used on FreeBSD. bsdcpio uses the libarchive library as a backend which does all of the work for reading and writing archives in various formats in stream-oriented fashion. Package: bsdcpio Source: libarchive Version: 2.8.5-5 Architecture: i386 Maintainer: Debian Libarchive Maintainers Installed-Size: 272 Depends: libarchive1 (= 2.8.5-5), libacl1 (>= 2.2.11-1), libattr1 (>= 2.4.41-1), libbz2-1.0, libc6 (>= 2.7-1), liblzma2, libxml2 (>= 2.6.27), zlib1g (>= 1:1.1.4) Suggests: bsdtar Filename: i386/bsdcpio_2.8.5-5_i386.deb Size: 125294 MD5sum: 2cfb5ab806e5ca423058d0377266ed62 SHA1: 7f5894c7616e2be2b9eb7272ddf8ed5d9dc5ebc5 SHA256: 8baa6ceb4cf2e9b87f4d163c330ba0172a6ba7f1ce89100f71d77dc75598c318 Section: utils Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Implementation of the 'cpio' program from FreeBSD The bsdcpio program is the default system 'tar' program used on FreeBSD. bsdcpio uses the libarchive library as a backend which does all of the work for reading and writing archives in various formats in stream-oriented fashion. Package: bsdtar Source: libarchive Version: 2.8.5-5 Architecture: amd64 Maintainer: Debian Libarchive Maintainers Installed-Size: 328 Depends: libarchive1 (= 2.8.5-5), libacl1 (>= 2.2.11-1), libattr1 (>= 2.4.41-1), libbz2-1.0, libc6 (>= 2.7-1), liblzma2, libxml2 (>= 2.6.27), zlib1g (>= 1:1.1.4) Suggests: bsdcpio Filename: amd64/bsdtar_2.8.5-5_amd64.deb Size: 150936 MD5sum: 6ca386f5e30101ffd4110765730ad58a SHA1: b3275584863b7f529e9575c98c69b28a52e5b84f SHA256: 29fba1caad4245d0366361274032ea171f2a7efacab55dbfcad80e76ea729328 Section: utils Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Implementation of the 'tar' program from FreeBSD The bsdtar program is the default system 'tar' program used on FreeBSD. bsdtar uses the libarchive library as a backend which does all of the work for reading and writing archives in various formats in stream-oriented fashion. Package: bsdtar Source: libarchive Version: 2.8.5-5 Architecture: i386 Maintainer: Debian Libarchive Maintainers Installed-Size: 308 Depends: libarchive1 (= 2.8.5-5), libacl1 (>= 2.2.11-1), libattr1 (>= 2.4.41-1), libbz2-1.0, libc6 (>= 2.7-1), liblzma2, libxml2 (>= 2.6.27), zlib1g (>= 1:1.1.4) Suggests: bsdcpio Filename: i386/bsdtar_2.8.5-5_i386.deb Size: 145858 MD5sum: de6035622994979fcc0576459c5d291f SHA1: 94f0a14bea4cbfad133671da99510fbc5ccc11cd SHA256: 807f795c2020dab2804dec2b0d322572785d84d2c8e419425ae5105070a58135 Section: utils Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Implementation of the 'tar' program from FreeBSD The bsdtar program is the default system 'tar' program used on FreeBSD. bsdtar uses the libarchive library as a backend which does all of the work for reading and writing archives in various formats in stream-oriented fashion. Package: byacc Version: 20140715-1 Architecture: amd64 Maintainer: Dave Beckett Installed-Size: 232 Depends: libc6 (>= 2.7-1) Filename: amd64/byacc_20140715-1_amd64.deb Size: 96810 MD5sum: 265254732d264e77b81ef8c31570f417 SHA1: 383e9a770f2cebd0e9e7955472a06d65ef6c287d SHA256: e57172b46b526c6e87603dc01c5de09fde617f18f06a918ca3ba052fa0af87bd Section: devel Priority: extra Homepage: http://invisible-island.net/byacc/ Description: public domain Berkeley LALR Yacc parser generator This package provides a parser generator utility that reads a grammar specification from a file and generates an LR(1) parser for it. The parsers consist of a set of LALR(1) parsing tables and a driver routine written in the C programming language. It has a public domain license which includes the generated C. Package: byacc Version: 20140715-1 Architecture: i386 Maintainer: Dave Beckett Installed-Size: 212 Depends: libc6 (>= 2.7-1) Filename: i386/byacc_20140715-1_i386.deb Size: 87358 MD5sum: f88e78d9c160672e4fd6a1146c2e5408 SHA1: 660465cf1046ecf3e5143e38a436ebe90ea42320 SHA256: 7ac4961fd6ec2cb876a57030e7963c2ef0a3b9756c0742f0f2cb2be2b91d3dac Section: devel Priority: extra Homepage: http://invisible-island.net/byacc/ Description: public domain Berkeley LALR Yacc parser generator This package provides a parser generator utility that reads a grammar specification from a file and generates an LR(1) parser for it. The parsers consist of a set of LALR(1) parsing tables and a driver routine written in the C programming language. It has a public domain license which includes the generated C. Package: cdrkit-doc Source: cdrkit Version: 9:1.1.11-1.1 Architecture: all Maintainer: Joerg Jaspert Installed-Size: 420 Suggests: wodim, genisoimage, icedax Conflicts: cdrtools-doc Replaces: cdrtools-doc Filename: all/cdrkit-doc_1.1.11-1.1_all.deb Size: 161124 MD5sum: 07d991321cf18525478479cd2e98f67d SHA1: 8980a22f7943fe3e85841b71853fd5edda74267e SHA256: 40d7ef99e5e93f218c302f2e28a47924961b0906c60631f5dc270da9da7888cb Section: doc Priority: optional Description: Documentation for the cdrkit package suite This is the documentation for the cdrkit package suite, namely wodim, genisoimage and icedax. Package: cmake Version: 2.8.11.1-1vnz1 Architecture: amd64 Maintainer: Modestas Vainius Installed-Size: 12628 Depends: libarchive1, libc6 (>= 2.7-1), libcurl3-gnutls (>= 7.16.2-1), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.2.3.3.dfsg), cmake-data (= 2.8.11.1-1vnz1), procps Recommends: make, gcc Suggests: geany Filename: amd64/cmake_2.8.11.1-1vnz1_amd64.deb Size: 5227086 MD5sum: 6e439743e8c67035fbf149f21cad7589 SHA1: 676cacbae0e20f8f5e883c203605543e75f5cd8b SHA256: 6ec47ca9df848c00458dd4804d136635e1b1808d3834d289f1534bfaf31a1792 Section: devel Priority: optional Homepage: http://cmake.org/ Description: cross-platform, open-source make system CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. CMake is quite sophisticated: it is possible to support complex environments requiring system configuration, pre-processor generation, code generation, and template instantiation. . CMake was developed by Kitware as part of the NLM Insight Segmentation and Registration Toolkit project. The ASCI VIEWS project also provided support in the context of their parallel computation environment. Other sponsors include the Insight, VTK, and VXL open source software communities. Package: cmake Version: 2.8.11.1-1vnz1 Architecture: i386 Maintainer: Modestas Vainius Installed-Size: 12196 Depends: libarchive1, libc6 (>= 2.7-1), libcurl3-gnutls (>= 7.16.2-1), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.2.3.3.dfsg), cmake-data (= 2.8.11.1-1vnz1), procps Recommends: make, gcc Suggests: geany Filename: i386/cmake_2.8.11.1-1vnz1_i386.deb Size: 5146174 MD5sum: ed643cad203f38a1047187aa8d93f127 SHA1: 6c88a7d737a7c0210fb6292599cc98845bc21ffe SHA256: 1ee5eecd9dbfc7d6da3fb18047183a4032633a207e72bffc32b1220536731487 Section: devel Priority: optional Homepage: http://cmake.org/ Description: cross-platform, open-source make system CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. CMake is quite sophisticated: it is possible to support complex environments requiring system configuration, pre-processor generation, code generation, and template instantiation. . CMake was developed by Kitware as part of the NLM Insight Segmentation and Registration Toolkit project. The ASCI VIEWS project also provided support in the context of their parallel computation environment. Other sponsors include the Insight, VTK, and VXL open source software communities. Package: cmake-curses-gui Source: cmake Version: 2.8.11.1-1vnz1 Architecture: amd64 Maintainer: Modestas Vainius Installed-Size: 3840 Depends: libarchive1, libc6 (>= 2.7-1), libcurl3-gnutls (>= 7.16.2-1), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.2.3.3.dfsg), cmake-data, cmake (= 2.8.11.1-1vnz1) Conflicts: cmake (<= 2.6.2-1) Replaces: cmake (<= 2.6.2-1) Filename: amd64/cmake-curses-gui_2.8.11.1-1vnz1_amd64.deb Size: 1553012 MD5sum: ac71a3d56d19e2faaca89a6d2a63c493 SHA1: dd40a66b16d4e7a3982a665bae109def1a743b1f SHA256: af5fb420a962e6f15cc29447f79f4f54714c37196035c6b1b1e905aeb6cf5ba8 Section: devel Priority: optional Homepage: http://cmake.org/ Description: curses based user interface for CMake (ccmake) CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. . This package provides the CMake curses interface. Project configuration settings may be specified interactively through this GUI. Brief instructions are provided at the bottom of the terminal when the program is running. The main executable file for this GUI is "ccmake". Package: cmake-curses-gui Source: cmake Version: 2.8.11.1-1vnz1 Architecture: i386 Maintainer: Modestas Vainius Installed-Size: 3696 Depends: libarchive1, libc6 (>= 2.7-1), libcurl3-gnutls (>= 7.16.2-1), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.2.3.3.dfsg), cmake-data, cmake (= 2.8.11.1-1vnz1) Conflicts: cmake (<= 2.6.2-1) Replaces: cmake (<= 2.6.2-1) Filename: i386/cmake-curses-gui_2.8.11.1-1vnz1_i386.deb Size: 1523342 MD5sum: 7ff7c93091dfbc4f4dbd687459a9920b SHA1: 3d43661e7fca5eee31dbb30bdffd77a643b3e89b SHA256: 628391dae17011707bfbaa6baeedbb4aa0929dcadbfda7e561d0638d51938dec Section: devel Priority: optional Homepage: http://cmake.org/ Description: curses based user interface for CMake (ccmake) CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. . This package provides the CMake curses interface. Project configuration settings may be specified interactively through this GUI. Brief instructions are provided at the bottom of the terminal when the program is running. The main executable file for this GUI is "ccmake". Package: cmake-data Source: cmake Version: 2.8.11.1-1vnz1 Architecture: all Maintainer: Modestas Vainius Installed-Size: 5200 Depends: emacsen-common Conflicts: cmake (<= 2.6.2-1) Replaces: cmake (<= 2.6.2-1) Filename: all/cmake-data_2.8.11.1-1vnz1_all.deb Size: 1436812 MD5sum: c2392c48902fae888b6fc14f880c6ccc SHA1: 4afc3f9b4416c14b3982a4cb1df6407edfa99c68 SHA256: ee24745f311c5bf672310b7a17bc3556c6165d2bd5729977ef18bba4fbb6df6e Section: devel Priority: optional Homepage: http://cmake.org/ Description: CMake data files (modules, templates and documentation) This package provides CMake architecture independent data files (modules, templates, documentation etc.). Unless you have cmake installed, you probably do not need this package. Package: cmake-dbg Source: cmake Version: 2.8.11.1-1vnz1 Architecture: amd64 Maintainer: Modestas Vainius Installed-Size: 173116 Depends: cmake-data, cmake (= 2.8.11.1-1vnz1) Filename: amd64/cmake-dbg_2.8.11.1-1vnz1_amd64.deb Size: 56390662 MD5sum: b77b8bf68c69aa312d818ba6e84cf646 SHA1: b6d4fcb6bb3c581b028a76d78b334c1ba1e01bdd SHA256: f143d9f93fa48ed060eac960164e7de8a541cb6a39bc9531d134418a49f0e543 Section: debug Priority: extra Homepage: http://cmake.org/ Description: debugging symbols for CMake CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. . This package provides CMake debugging symbols. Package: cmake-dbg Source: cmake Version: 2.8.11.1-1vnz1 Architecture: i386 Maintainer: Modestas Vainius Installed-Size: 152340 Depends: cmake-data, cmake (= 2.8.11.1-1vnz1) Filename: i386/cmake-dbg_2.8.11.1-1vnz1_i386.deb Size: 55160754 MD5sum: f0b15099f98b7d9bdc0c29c9b1025ec4 SHA1: 925455da2e879d38e32e117cd06ad03d6eebaf86 SHA256: 2113fe24a8d571235d4554e672238abd0e151336542bdda65a2f648db366dabd Section: debug Priority: extra Homepage: http://cmake.org/ Description: debugging symbols for CMake CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. . This package provides CMake debugging symbols. Package: cmake-doc Source: cmake Version: 2.8.11.1-1vnz1 Architecture: all Maintainer: Modestas Vainius Installed-Size: 4880 Depends: cmake-data Recommends: doc-base Suggests: cmake Conflicts: cmake (<= 2.8.2-1), cmake-curses-gui (<= 2.8.2-1), cmake-data (<= 2.8.2-1), cmake-qt-gui (<= 2.8.2-1) Replaces: cmake (<= 2.8.2-1), cmake-curses-gui (<= 2.8.2-1), cmake-data (<= 2.8.2-1), cmake-qt-gui (<= 2.8.2-1) Filename: all/cmake-doc_2.8.11.1-1vnz1_all.deb Size: 2004276 MD5sum: e0a94ad0360d00fe467453d2bdb13e73 SHA1: 10442dfd5b0096f505ac8787ffbf1d3789d4b3d1 SHA256: 7f635695adff93fc86f5ed3291d72982a73aeeeea902e00924eb9b20e36b2de9 Section: doc Priority: optional Homepage: http://cmake.org/ Description: extended documentation in various formats for CMake CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. . This package provides additional documentation in various formats like HTML or plain text. Package: cmake-qt-gui Source: cmake Version: 2.8.11.1-1vnz1 Architecture: amd64 Maintainer: Modestas Vainius Installed-Size: 4100 Depends: libarchive1, libc6 (>= 2.7-1), libcurl3-gnutls (>= 7.16.2-1), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libqtcore4 (>= 4.4.3), libqtgui4 (>= 4.4.3), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.2.3.3.dfsg), cmake-data, cmake (= 2.8.11.1-1vnz1) Provides: cmake-gui Filename: amd64/cmake-qt-gui_2.8.11.1-1vnz1_amd64.deb Size: 1621120 MD5sum: a9beaff95d88c877a7cbcdd6ffef1b86 SHA1: 1c20a01e849841b234f4765caeb7dcb3199c9f00 SHA256: 52752cc7d1ec50624249d74a5753a45a41ca060ab556804cb4016d2d12425cc2 Section: devel Priority: optional Homepage: http://cmake.org/ Description: Qt4 based user interface for CMake (cmake-gui) CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. . This package provides the CMake Qt4 based GUI. Project configuration settings may be specified interactively. Brief instructions are provided at the bottom of the window when the program is running. The main executable file for this GUI is "cmake-gui". Package: cmake-qt-gui Source: cmake Version: 2.8.11.1-1vnz1 Architecture: i386 Maintainer: Modestas Vainius Installed-Size: 3932 Depends: libarchive1, libc6 (>= 2.7-1), libcurl3-gnutls (>= 7.16.2-1), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libqtcore4 (>= 4.4.3), libqtgui4 (>= 4.4.3), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.2.3.3.dfsg), cmake-data, cmake (= 2.8.11.1-1vnz1) Provides: cmake-gui Filename: i386/cmake-qt-gui_2.8.11.1-1vnz1_i386.deb Size: 1591100 MD5sum: 9cf755a0e37fcdd4ca9e848a3fd541a7 SHA1: b55161e9916652579cd82d6b418b65a5e22f33ff SHA256: 10ecb009f87c981c39f9696daf0d0f08e2fb1a0585ab0fd98af6b54946557cd4 Section: devel Priority: optional Homepage: http://cmake.org/ Description: Qt4 based user interface for CMake (cmake-gui) CMake is used to control the software compilation process using simple platform and compiler independent configuration files. CMake generates native makefiles and workspaces that can be used in the compiler environment of your choice. . This package provides the CMake Qt4 based GUI. Project configuration settings may be specified interactively. Brief instructions are provided at the bottom of the window when the program is running. The main executable file for this GUI is "cmake-gui". Package: debhelper Version: 8.1.6.1 Architecture: all Maintainer: Joey Hess Installed-Size: 1532 Depends: perl, perl-base (>= 5.10), file (>= 3.23), dpkg-dev (>= 1.14.19), html2text, binutils, po-debconf, man-db (>= 2.5.1-1) Suggests: dh-make Conflicts: dpkg-cross (<< 1.18), python-central (<< 0.5.6), python-support (<< 0.5.3) Filename: all/debhelper_8.1.6.1_all.deb Size: 559582 MD5sum: 5ed00b337187a971d7050c83a8e4a1cf SHA1: 1d7d403fe0e2df3f68529842138d032baeed3614 SHA256: 23a9d2649042c42ff2ad65df21f5254908c9965722aff25cbb22b40c32a5422e Section: devel Priority: optional Homepage: http://kitenet.net/~joey/code/debhelper/ Description: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks related to building debian packages. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the debian menu system, debconf, doc-base, etc. Most debian packages use debhelper as part of their build process. Package: debhelper Version: 9.20120909.1 Architecture: all Maintainer: Joey Hess Installed-Size: 1796 Depends: perl, file (>= 3.23), dpkg-dev (>= 1.14.19), html2text, binutils, po-debconf, man-db (>= 2.5.1-1) Suggests: dh-make Conflicts: automake (<< 1.11.2), dpkg-cross (<< 1.18), python-central (<< 0.5.6), python-support (<< 0.5.3) Filename: all/debhelper_9.20120909.1_all.deb Size: 707706 MD5sum: 30182b25b660521cdbe3df902204c78c SHA1: bd40cf7ff0c796210597c3410c9f8b7fd5ddad82 SHA256: 64fb73be90992635a3a940dd8c13e927bc95a7b0cc931958092891763bba59b3 Section: devel Priority: optional Homepage: http://kitenet.net/~joey/code/debhelper/ Description: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks related to building debian packages. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the debian menu system, debconf, doc-base, etc. Most debian packages use debhelper as part of their build process. Package: dh-autoreconf Version: 2.1vnz1 Architecture: all Maintainer: Julian Andres Klode Installed-Size: 104 Depends: perl, debhelper, autoconf, automake | automaken, libtool Recommends: autopoint Enhances: cdbs, debhelper Filename: all/dh-autoreconf_2.1vnz1_all.deb Size: 11600 MD5sum: 8c803da3a160ea60e39967710d6bcf8d SHA1: 68784617c77d28b32471977610f9893a6899185e SHA256: 814eff3d128d969e33fe5340082dd1be782e461b38d7669f84db9d35aa1a30e8 Section: devel Priority: optional Description: debhelper add-on to call autoreconf and clean up after the build dh-autoreconf provides a debhelper sequence addon named 'autoreconf' and two commands, dh_autoreconf and dh_autoreconf_clean. . The dh_autoreconf command creates a list of the files and their checksums, calls autoreconf and then creates a second list for the new files. . The dh_autoreconf_clean command compares these two lists and removes all files which have been added or changed (files may be excluded if needed). . For CDBS users, a rule is provided to call the dh-autoreconf programs at the right time. Package: dh-lua Version: 19.0 Architecture: all Maintainer: Enrico Tassi Installed-Size: 236 Depends: perl, debhelper (>= 7.0.0), dctrl-tools, libtool, libtool-bin | libltdl-dev, pkg-config, liblua5.2-dev, lua5.2, liblua5.1-0-dev, lua5.1, libfile-find-rule-perl Filename: all/dh-lua_19.0_all.deb Size: 32626 MD5sum: 9fd04ec3fc9962643673ab1976897b1d SHA1: 36b77d38ef6e27458486ec0ead73e42c4a0fbc0f SHA256: 2e6b1d8185b32a51e91750366f18977029c35a463bb36267539e216e3c899782 Section: interpreters Priority: optional Homepage: http://pkg-lua.alioth.debian.org/ Description: helper tools for maintaining Lua-related packages This package contains the Debian policy for the Debian packages relative to the Lua scripting language, as well as some tools to help build them. . This package is meant to superseed lua5.1-policy. Package: doas Version: 6.8.1-1 Architecture: amd64 Maintainer: Scupake Installed-Size: 128 Depends: libc6 (>= 2.7-1), libpam0g (>= 0.99.7.1) Provides: sudo Filename: amd64/doas_6.8.1-1_amd64.deb Size: 24342 MD5sum: 0771ffd8ab3b6f6a5c47224860a5db58 SHA1: 043c6b5281a0df37386eb0398d2ed847d5a6d7a5 SHA256: 8eeacddf148dc8d1eb2c5df94da60a602468c8863afceb6288129d98eae9286f Section: admin Priority: optional Homepage: https://github.com/Duncaen/OpenDoas Description: minimal replacement for sudo OpenDoas: a portable version of OpenBSD's doas command doas is a minimal replacement for the venerable sudo. It was initially written by Ted Unangst of the OpenBSD project to provide 95% of the features of sudo with a fraction of the codebase. Package: doas Version: 6.8.1-1 Architecture: i386 Maintainer: Scupake Installed-Size: 120 Depends: libc6 (>= 2.7-1), libpam0g (>= 0.99.7.1) Provides: sudo Filename: i386/doas_6.8.1-1_i386.deb Size: 22844 MD5sum: c01fa7b45d39142dc5d05457b4f052a3 SHA1: 3963f42f7943f4161a327938d22e5a89ebd37d94 SHA256: b0d3aaf991a85001395400c1932762fe070fe0392185d4fe6dc4222515594f60 Section: admin Priority: optional Homepage: https://github.com/Duncaen/OpenDoas Description: minimal replacement for sudo OpenDoas: a portable version of OpenBSD's doas command doas is a minimal replacement for the venerable sudo. It was initially written by Ted Unangst of the OpenBSD project to provide 95% of the features of sudo with a fraction of the codebase. Package: fonts-quicksand Version: 0.2016-2.2 Architecture: all Maintainer: Jonathan Carter Installed-Size: 448 Provides: fonts-quicksand-ttf, ttf-quicksand Filename: all/fonts-quicksand_0.2016-2.2_all.deb Size: 196166 MD5sum: 3410cb38939ae4847087f2182dd05c33 SHA1: 7c191d9881ad38c4c27f570bee9284776d124a27 SHA256: 36a21abe44f76fc4177dd724da50fdb3c73d2120a3ac7289ccd35d83943e6dbc Section: fonts Priority: optional Homepage: https://fonts.google.com/specimen/Quicksand Description: sans-serif font with round attributes Quicksand is a display sans serif with rounded terminals. The project was initiated by Andrew Paglinawan in 2008 using geometric shapes as a core foundation. It is designed for display purposes but kept legible enough to use in small sizes as well. . In 2016, in collaboration with Andrew, it was thoroughly revised by Thomas Jockin to improve the quality. Package: fuse Version: 2.8.7-2.1 Architecture: amd64 Maintainer: Daniel Baumann Installed-Size: 224 Depends: libc6 (>= 2.7-1), libfuse2 (= 2.8.7-2.1), adduser, mount (>= 2.19.1), sed (>= 4), udev | makedev Conflicts: fuse-utils (<< 2.8.5-2~), loop-aes-utils Replaces: fuse-utils Filename: amd64/fuse_2.8.7-2.1_amd64.deb Size: 70298 MD5sum: 91c0bd592ce436bb69a8491fb1f139ee SHA1: 5860ecb9de520afbded9184056dc9b66e925f7da SHA256: f7402c8f0fd091821d2a49a70d11ef0e7bdfa4eef70c7245612df40c7d14955c Section: utils Priority: optional Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. Package: fuse Version: 2.8.7-2.1 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 224 Depends: libc6 (>= 2.7-1), libfuse2 (= 2.8.7-2.1), adduser, mount (>= 2.19.1), sed (>= 4), udev | makedev Conflicts: fuse-utils (<< 2.8.5-2~), loop-aes-utils Replaces: fuse-utils Filename: i386/fuse_2.8.7-2.1_i386.deb Size: 68444 MD5sum: d93e70d04e993f3e61e088336db85790 SHA1: c56769c7ba0302b2d4805cf9f21d0d9fc2c25b96 SHA256: c98ff5be7569eaee28307cc2a57dde09c7e80541e62b91840c736c8a901ce6e8 Section: utils Priority: optional Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. Package: fuse-dbg Source: fuse Version: 2.8.7-2.1 Architecture: amd64 Maintainer: Daniel Baumann Installed-Size: 600 Depends: fuse (= 2.8.7-2.1), libfuse2 (= 2.8.7-2.1), libfuse-dev (= 2.8.7-2.1) Filename: amd64/fuse-dbg_2.8.7-2.1_amd64.deb Size: 209618 MD5sum: c10fc137399b81784d56d4c9cfb6c6e5 SHA1: b1ebba82ac6c30d8d25323ee5ce6aab14ab93bb5 SHA256: 489d1fec6afb06fb8c3bee9812b8838758c6aedfecb8e49cff1b0327690d757b Section: debug Priority: extra Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. Package: fuse-dbg Source: fuse Version: 2.8.7-2.1 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 480 Depends: fuse (= 2.8.7-2.1), libfuse2 (= 2.8.7-2.1), libfuse-dev (= 2.8.7-2.1) Filename: i386/fuse-dbg_2.8.7-2.1_i386.deb Size: 199538 MD5sum: c461437b48b11974757c7b554858e0dd SHA1: f27fba820798566a793c7df60df4f2cfda412bd7 SHA256: c70fc967c5d47f7b6f0d509e5d978011b28f773411ffc1f6233c52dace2e3f37 Section: debug Priority: extra Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. Package: fuse-utils Source: fuse Version: 2.8.7-2.1 Architecture: all Maintainer: Daniel Baumann Installed-Size: 76 Depends: fuse Filename: all/fuse-utils_2.8.7-2.1_all.deb Size: 41648 MD5sum: 9f3dba279e531ab6e1a574bf5430f7bf SHA1: 788d0e8cf30bd0624d4dd31e497ad0d1a4207f8e SHA256: f17c27efda1de790dc2399840d97a0aff19a79e8aeb6d490f8af88beda027114 Section: utils Priority: optional Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace (transitional package) Package to ease upgrading from older fuse-utils packages to the new fuse package. . This package can be purged at anytime once the fuse package has been installed. Package: genisoimage Source: cdrkit Version: 9:1.1.11-1.1 Architecture: amd64 Maintainer: Joerg Jaspert Installed-Size: 1580 Depends: libbz2-1.0, libc6 (>= 2.7-1), libmagic1, zlib1g (>= 1:1.1.4) Suggests: wodim, cdrkit-doc Conflicts: mkhybrid, mkisofs Replaces: mkisofs Provides: mkisofs Filename: amd64/genisoimage_1.1.11-1.1_amd64.deb Size: 632242 MD5sum: e519142b81c5469dc7c19d792cb4c0a5 SHA1: 92685242ab3b2759503e31966f987072637fd099 SHA256: 0df7566d2279bc1e0c3801b0c15bff73296aed3e7de628a7ad5fca8f6e816001 Section: otherosfs Priority: optional Description: Creates ISO-9660 CD-ROM filesystem images genisoimage is a pre-mastering program for creating ISO-9660 CD-ROM filesystem images, which can then be written to CD or DVD media using the wodim program. genisoimage includes support for making bootable "El Torito" CDs, as well as CDs with support for the Macintosh HFS filesystem. . The package also includes extra tools useful for working with ISO images: * mkzftree - create ISO-9660 image with compressed contents * dirsplit - easily separate large directory contents into disks of predefined size * geteltorito - extract an El Torito boot image from a CD image . Please install cdrkit-doc if you want most of the documentation and README files. Package: genisoimage Source: cdrkit Version: 9:1.1.11-1.1 Architecture: i386 Maintainer: Joerg Jaspert Installed-Size: 1380 Depends: libbz2-1.0, libc6 (>= 2.7-1), libmagic1, zlib1g (>= 1:1.1.4) Suggests: wodim, cdrkit-doc Conflicts: mkhybrid, mkisofs Replaces: mkisofs Provides: mkisofs Filename: i386/genisoimage_1.1.11-1.1_i386.deb Size: 582462 MD5sum: ca76941ee22239da75d5177267972df1 SHA1: 0dba014de49d8a5b80d6acab01101c403e893d93 SHA256: 4e9a72621970978d57c317e2469b3ef9b4fbbf8a02420a82055563355df1284f Section: otherosfs Priority: optional Description: Creates ISO-9660 CD-ROM filesystem images genisoimage is a pre-mastering program for creating ISO-9660 CD-ROM filesystem images, which can then be written to CD or DVD media using the wodim program. genisoimage includes support for making bootable "El Torito" CDs, as well as CDs with support for the Macintosh HFS filesystem. . The package also includes extra tools useful for working with ISO images: * mkzftree - create ISO-9660 image with compressed contents * dirsplit - easily separate large directory contents into disks of predefined size * geteltorito - extract an El Torito boot image from a CD image . Please install cdrkit-doc if you want most of the documentation and README files. Package: gnutls-bin Source: gnutls26 Version: 2.9.12-2 Architecture: amd64 Maintainer: Debian GnuTLS Maintainers Installed-Size: 660 Depends: libc6 (>= 2.7-1), libgcrypt11 (>= 1.4.0), libgnutls26 (>= 2.9.11-0), libgpg-error0 (>= 1.4), libreadline5 (>= 5.2), libtasn1-3 (>= 0.3.4), zlib1g (>= 1:1.1.4) Conflicts: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls5-dev Replaces: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls5-dev Filename: amd64/gnutls-bin_2.9.12-2_amd64.deb Size: 1936822 MD5sum: a4b425f91bf3cede924242b3e32acfb4 SHA1: 232394b96b1ce169b0052c4e1e4f1b331d960434 SHA256: 366ed7cade98a0a894a166140fedb9d1dad46db6385600080f912deda1939387 Section: net Priority: optional Homepage: http://www.gnutls.org/ Description: the GNU TLS library - commandline utilities gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . This package contains a commandline interface to the GNU TLS library, which can be used to set up secure connections from e.g. shell scripts. Package: gnutls-bin Source: gnutls26 Version: 2.9.12-2 Architecture: i386 Maintainer: Debian GnuTLS Maintainers Installed-Size: 620 Depends: libc6 (>= 2.7-1), libgcrypt11 (>= 1.4.0), libgnutls26 (>= 2.9.11-0), libgpg-error0 (>= 1.4), libreadline5 (>= 5.2), libtasn1-3 (>= 0.3.4), zlib1g (>= 1:1.1.4) Conflicts: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls5-dev Replaces: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls5-dev Filename: i386/gnutls-bin_2.9.12-2_i386.deb Size: 1876554 MD5sum: 7fa6fc8a6289759a8c0c19a0e0f0e1c3 SHA1: c3c7e8b038cf9f4a5c1ccb74a6959bc398e12f80 SHA256: a043fac14d031fd3a4b77748af7f4a2b0873163c2c898ef040d1919489ebf334 Section: net Priority: optional Homepage: http://www.gnutls.org/ Description: the GNU TLS library - commandline utilities gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . This package contains a commandline interface to the GNU TLS library, which can be used to set up secure connections from e.g. shell scripts. Package: gnutls-doc Source: gnutls26 Version: 2.9.12-2 Architecture: all Maintainer: Debian GnuTLS Maintainers Installed-Size: 8760 Depends: dpkg (>= 1.15.4) | install-info Filename: all/gnutls-doc_2.9.12-2_all.deb Size: 19899592 MD5sum: 660324b89eddd516020a65e00b66f272 SHA1: b88484cfb2b334d98e718610f151c498617bb37d SHA256: f4bee74aac2e45671405c19d19ea4e68129e6d06d1de7587eae2294159b397ef Section: doc Priority: optional Homepage: http://www.gnutls.org/ Description: the GNU TLS library - documentation and examples gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . This package contains all the gnutls documentation. Package: gtk-doc-tools Source: gtk-doc Version: 1.15-2.1 Architecture: all Maintainer: Loic Minier Installed-Size: 2044 Depends: perl, python, jade (>= 1.2.1-35), docbook-dsssl, docbook-xml (>= 4.3), docbook-xsl (>= 1.64.1.0), docbook-to-man, xsltproc (>= 1.1.15), highlight, gnome-common Recommends: pkg-config (>= 0.19.0) Conflicts: sgml2x (<< 1.0.0-2) Filename: all/gtk-doc-tools_1.15-2.1_all.deb Size: 3531746 MD5sum: 7d234f73086d4f4808d7c16a4355246a SHA1: 73bfe2ba16340f9dbbeed46ef39494344322c153 SHA256: 33343a4da64b97b413be21b7c32af1cfd4212f3c6b7d208a0be4c631641e25bb Section: gnome Priority: optional Description: the GTK+ documentation tools These tools extract documentation embedded in GNOME source code, and produce pretty output via DocBook SGML. Package: guile-gnutls Source: gnutls26 Version: 2.9.12-2 Architecture: amd64 Maintainer: Debian GnuTLS Maintainers Installed-Size: 504 Depends: guile-1.8-libs, libc6 (>= 2.7-1), libgmp3c2, libgnutls26 (>= 2.9.11-0), libltdl7 (>= 2.2.6b), guile-1.8 Filename: amd64/guile-gnutls_2.9.12-2_amd64.deb Size: 1616848 MD5sum: fcd8eee28e25b06f5a79d445240574cf SHA1: 6aa5d767293581adaeefb83d757f92fa50a0b6a0 SHA256: e3c90a9a8a37e06efaffd1a7b7994989e117d4969d1587c5a25ca0ffc673aa70 Section: lisp Priority: optional Homepage: http://www.gnutls.org/ Description: the GNU TLS library - GNU Guile bindings gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the GNU Guile 1.8 modules. Package: guile-gnutls Source: gnutls26 Version: 2.9.12-2 Architecture: i386 Maintainer: Debian GnuTLS Maintainers Installed-Size: 484 Depends: guile-1.8-libs, libc6 (>= 2.7-1), libgmp3c2, libgnutls26 (>= 2.9.11-0), libltdl7 (>= 2.2.6b), guile-1.8 Filename: i386/guile-gnutls_2.9.12-2_i386.deb Size: 1590364 MD5sum: 2faccf2237f1763058db7360f6d6bd87 SHA1: 72e013a75ca5c91f58c5cd2dfb12050ce972b279 SHA256: 071c903a3c275f4eb5743901306f24011538b982bf4eb670dccadaad83ca1dda Section: lisp Priority: optional Homepage: http://www.gnutls.org/ Description: the GNU TLS library - GNU Guile bindings gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the GNU Guile 1.8 modules. Package: icedax Source: cdrkit Version: 9:1.1.11-1.1 Architecture: amd64 Maintainer: Joerg Jaspert Installed-Size: 432 Depends: libc6 (>= 2.7-1) Suggests: vorbis-tools, cdrkit-doc Conflicts: cdda2wav Replaces: cdda2wav Provides: cdda2wav Filename: amd64/icedax_1.1.11-1.1_amd64.deb Size: 194006 MD5sum: 9e90d38dc7db2398e64326512eda6101 SHA1: 73529b37db24bec63a62f69559e435decc9eb18f SHA256: 0f6a7697a7800892b7a1bd02594d10f5e0d0b1d38102ea323b2773e229974671 Section: sound Priority: optional Description: Creates WAV files from audio CDs icedax lets you digitally copy ("rip") audio tracks from a CD, avoiding the distortion that is introduced when recording via a sound card. Data can be dumped into raw (cdr), wav or sun format sound files. Options control the recording format (stereo/mono; 8/16 bits; sampling rate, etc). . Please install cdrkit-doc if you want most of the documentation and README files. Package: icedax Source: cdrkit Version: 9:1.1.11-1.1 Architecture: i386 Maintainer: Joerg Jaspert Installed-Size: 392 Depends: libc6 (>= 2.7-1) Suggests: vorbis-tools, cdrkit-doc Conflicts: cdda2wav Replaces: cdda2wav Provides: cdda2wav Filename: i386/icedax_1.1.11-1.1_i386.deb Size: 175744 MD5sum: 05e45a0f201784b7364986552a0fd1b4 SHA1: 3c8e22ba966b748f4b2578ac51e0a2877e2b5942 SHA256: 4b62a0f34bf5f269666a5ecb1472fc1e56103e57be4142a251e22f72ccd6b62d Section: sound Priority: optional Description: Creates WAV files from audio CDs icedax lets you digitally copy ("rip") audio tracks from a CD, avoiding the distortion that is introduced when recording via a sound card. Data can be dumped into raw (cdr), wav or sun format sound files. Options control the recording format (stereo/mono; 8/16 bits; sampling rate, etc). . Please install cdrkit-doc if you want most of the documentation and README files. Package: idle-python2.4 Source: python2.4 Version: 2.4.6-1 Architecture: all Maintainer: Felix Krull Installed-Size: 1016 Depends: python2.4, python2.4-tk Enhances: python2.4 Filename: all/idle-python2.4_2.4.6-1_all.deb Size: 252820 MD5sum: 75cad7383e3d5bd15c5b92b0397bd875 SHA1: 24a6806a2b7877abbc7a873a96a600e3af1a6232 SHA256: 151ad7c42ca7409c37337f9d172492f7c638ddddd4f9c5240a9d610f717f5a78 Section: python Priority: optional Homepage: http://python.org/ Description: IDE for Python (version 2.4) using Tkinter IDLE is an Integrated Development Environment for Python (version 2.4). IDLE is written using Tkinter and therefore quite platform-independent. Original-Maintainer: Matthias Klose Python-Version: 2.4 Package: idle-python3.2 Source: python3.2 Version: 3.2.4-1 Architecture: all Maintainer: Felix Krull Installed-Size: 1176 Depends: python3.2 (= 3.2.4-1), python3.2-tk (= 3.2.4-1) Enhances: python3.2 (= 3.2.4-1) Breaks: python3.2 (<< 3.2.4-1) Replaces: python3.2 (<< 3.2.4-1) Filename: all/idle-python3.2_3.2.4-1_all.deb Size: 297738 MD5sum: dea719cf838d2a998d3d76416154b4cb SHA1: dc9e8131d977abe35ad8a4c2f08252b85b0ba434 SHA256: ae205f934c781881dc5766ed94dc23a18715bf55c11c3438b9c20b7361393d29 Section: python Priority: optional Homepage: http://python.org/ Description: IDE for Python (version 3.2) using Tkinter IDLE is an Integrated Development Environment for Python (version 3.2). IDLE is written using Tkinter and therefore quite platform-independent. Original-Maintainer: Matthias Klose Python-Version: 3.2 Package: info Source: texinfo Version: 4.13a.dfsg.1-8vnz2 Architecture: amd64 Maintainer: Debian TeX maintainers Installed-Size: 420 Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3), install-info Suggests: texinfo-doc-nonfree Replaces: texinfo (<< 4.7-2) Provides: info-browser Filename: amd64/info_4.13a.dfsg.1-8vnz2_amd64.deb Size: 1146108 MD5sum: 8228c0d5acb3e286b60a7dbf88ba5334 SHA1: a447dff58521c17d341b9f45ed19da7517b3a986 SHA256: 94f527ef5525d2e7e0cbc42fe55d2039bdf2d9dbcf0751e7b9e1c4042ee2c55b Section: doc Priority: important Description: Standalone GNU Info documentation browser The Info file format is an easily-parsable representation for online documents. This program allows you to view Info documents, like the ones stored in /usr/share/info. . Much of the software in Debian comes with its online documentation in the form of Info files, so it is most likely you will want to install it. Package: info Source: texinfo Version: 4.13a.dfsg.1-8vnz2 Architecture: i386 Maintainer: Debian TeX maintainers Installed-Size: 392 Depends: libc6 (>= 2.7-1), libncurses5 (>= 5.6+20071006-3), install-info Suggests: texinfo-doc-nonfree Replaces: texinfo (<< 4.7-2) Provides: info-browser Filename: i386/info_4.13a.dfsg.1-8vnz2_i386.deb Size: 1089804 MD5sum: d84d2bd753d3b57c0b8bcdd25fb50140 SHA1: 38e608717ef29cbd3009aee384fafae6308d9261 SHA256: afd245faca09c71c2ecc51f7d903a64d906b174bded45aa3b68da39f0dfcb021 Section: doc Priority: important Description: Standalone GNU Info documentation browser The Info file format is an easily-parsable representation for online documents. This program allows you to view Info documents, like the ones stored in /usr/share/info. . Much of the software in Debian comes with its online documentation in the form of Info files, so it is most likely you will want to install it. Package: install-info Source: texinfo Version: 4.13a.dfsg.1-8vnz2 Architecture: amd64 Maintainer: Debian TeX maintainers Installed-Size: 260 Depends: libc6 (>= 2.7-1) Conflicts: texinfo (<< 4.13a.dfsg.1-2) Replaces: texinfo (<< 4.13a.dfsg.1-2) Filename: amd64/install-info_4.13a.dfsg.1-8vnz2_amd64.deb Size: 832328 MD5sum: 45cec50e5af4872d16c7e0f4dec53daf SHA1: e25ba4b9aa36afdbd7b38cd076c97dcbdf994634 SHA256: e6ad2d62207a118c27ad99eacd0034fea3c71772e0f76cb7d99009f2e38b7721 Section: doc Priority: important Description: Manage installed documentation in info format The install-info utility creates the index of all installed documentation in info format and makes it available to info readers. Package: install-info Source: texinfo Version: 4.13a.dfsg.1-8vnz2 Architecture: i386 Maintainer: Debian TeX maintainers Installed-Size: 256 Depends: libc6 (>= 2.7-1) Conflicts: texinfo (<< 4.13a.dfsg.1-2) Replaces: texinfo (<< 4.13a.dfsg.1-2) Filename: i386/install-info_4.13a.dfsg.1-8vnz2_i386.deb Size: 825550 MD5sum: 60157b6331202fb18df812428c3d6a2c SHA1: b342dc23c7aa745b2aff13f4f7afa66de0477ce5 SHA256: 69b62b6eb33faa0861ffe8aaded4119eb6b25633fdc0dce32ae2ef9c34f66c29 Section: doc Priority: important Description: Manage installed documentation in info format The install-info utility creates the index of all installed documentation in info format and makes it available to info readers. Package: latex2html Version: 2008-debian1-6 Architecture: all Maintainer: Roland Stigge Installed-Size: 6928 Depends: perl, netpbm, ghostscript-x, texlive-base-bin, texlive-latex-recommended, texlive-fonts-recommended, texlive-latex-extra, perl-doc Filename: all/latex2html_2008-debian1-6_all.deb Size: 1868250 MD5sum: 83cca9c75737cc3933749d3ee00a1a73 SHA1: 5935acf2627b17db4508739ece0de654f68db10f SHA256: f3a03e7d93ff57269a93073514d74b47f43df6bbf13bf54549f379f4443196cc Section: tex Priority: optional Description: LaTeX to HTML translator LaTeX2HTML is a conversion tool that converts documents written in LaTeX to HTML format. In addition, it offers an easy migration path towards authoring complex hypermedia documents using familiar word-processing concepts. . LaTeX2HTML replicates the basic structure of a LaTeX document as a set of interconnected HTML files which can be explored using automatically generated navigation panels. The cross-references, citations, footnotes, the table of contents and the lists of figures and tables, are also translated into hypertext links. Formatting information which has equivalent ``tags'' in HTML (lists, quotes, paragraph breaks, type styles, etc.) is also converted appropriately. The remaining heavily formatted items such as mathematical equations, pictures or tables are converted to images which are placed automatically at the correct positions in the final HTML document. . LaTeX2HTML extends LaTeX by supporting arbitrary hypertext links and symbolic cross-references between evolving remote documents. It also allows the specification of conditional text and the inclusion of raw HTML commands. These hypermedia extensions to LaTeX are available as new commands and environments from within a LaTeX document. . Pstoimg, the part of latex2html that produces bitmap images from the LaTeX source, can support both GIF and PNG format. . Hompage: http://www.latex2html.org/ Package: lemon Source: sqlite3 Version: 3.7.13-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 236 Depends: libc6 (>= 2.7-1) Filename: amd64/lemon_3.7.13-1_amd64.deb Size: 701004 MD5sum: 8f20bbddec90cc4f59d288235ddadbe7 SHA1: 5abe17eddf559d446456f715536b33d0cd1c31d2 SHA256: 98c98e4d0a70d1db355ce1f78d52190ad0caafd65fbf4c346dc87c031d1b75ee Section: devel Priority: optional Homepage: http://www.sqlite.org/ Description: LALR(1) Parser Generator for C or C++ Lemon is an LALR(1) parser generator for C or C++. It does the same job as bison and yacc. But lemon is not another bison or yacc clone. It uses a different grammar syntax which is designed to reduce the number of coding errors. Lemon also uses a more sophisticated parsing engine that is faster than yacc and bison and which is both reentrant and thread-safe. Furthermore, Lemon implements features that can be used to eliminate resource leaks, making is suitable for use in long-running programs such as graphical user interfaces or embedded controllers. Package: lemon Source: sqlite3 Version: 3.7.13-1 Architecture: i386 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 228 Depends: libc6 (>= 2.7-1) Filename: i386/lemon_3.7.13-1_i386.deb Size: 688728 MD5sum: c75c38035b41501b6ce1c21022bc9615 SHA1: e76146250c0f998cfd8992ad9797715490f5cb77 SHA256: cb78882f9eaa72c62111591dc5fdfda461ab2b92c891fd467b292f4006df8616 Section: devel Priority: optional Homepage: http://www.sqlite.org/ Description: LALR(1) Parser Generator for C or C++ Lemon is an LALR(1) parser generator for C or C++. It does the same job as bison and yacc. But lemon is not another bison or yacc clone. It uses a different grammar syntax which is designed to reduce the number of coding errors. Lemon also uses a more sophisticated parsing engine that is faster than yacc and bison and which is both reentrant and thread-safe. Furthermore, Lemon implements features that can be used to eliminate resource leaks, making is suitable for use in long-running programs such as graphical user interfaces or embedded controllers. Package: libarchive-dev Source: libarchive Version: 2.8.5-5 Architecture: amd64 Maintainer: Debian Libarchive Maintainers Installed-Size: 692 Depends: libarchive1 (= 2.8.5-5) Conflicts: libarchive1 (<< 2.8.5-3) Replaces: libarchive1 (<< 2.8.5-3) Filename: amd64/libarchive-dev_2.8.5-5_amd64.deb Size: 231900 MD5sum: 4b0540a0e5223d0ea5f875e4649a3efc SHA1: 426a0784e80d0080c3e5c9fc07903b4ec6b0a657 SHA256: 7c0dfff2ed3660963f16e647591bbc0ec03f4ae369c481639bff6cfe3a6bd9a2 Section: libdevel Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Multi-format archive and compression library (development files) The libarchive library provides a flexible interface for reading and writing archives in various formats such as tar and cpio. libarchive also supports reading and writing archives compressed using various compression filters such as gzip and bzip2. The library is inherently stream-oriented; readers serially iterate through the archive, writers serially add things to the archive. In particular, note that there is currently no built-in support for random access nor for in-place modification. . Archive formats supported are: . * tar (read and write, including GNU extensions) * pax (read and write, including GNU and star extensions) * cpio (read and write, including odc and newc variants) * ISO9660 (read only, including Joliet and Rockridge extensions, with some limitations; write support starting with libarchive 2.9) * Zip (read only, with some limitations, uses zlib; write support starting with libarchive 2.8) * mtree (read and write, uses OpenSSL libraries for creating and verifying cryptographic hashes) * shar (write only) * ar (read and write, including BSD and GNU/SysV variants) * empty (read only; in particular, note that no other format will accept an empty file) * raw (read only, starting in libarchive 2.8) * xar (read only, starting in libarchive 2.8) . Filters supported are: . * gzip (read and write, uses zlib) * bzip2 (read and write, uses bzlib) * compress (read and write, uses an internal implementation) * uudecode (read only) * separate command-line compressors with fixed-signature auto-detection * xz and lzma (read and write using liblzma) * lzma (if you lack liblzma, you can get read-only lzma support through the lzmadec library; this will likely be dropped as soon as liblzma is stable and widely-available) * Starting with libarchive 2.7, most of the above will fall back to using command-line tools if the libraries were unavailable at build time. Note that the command-line tools are usually slower than using the libraries directly. . This package provides the files necessary for development with libarchive. Package: libarchive-dev Source: libarchive Version: 2.8.5-5 Architecture: i386 Maintainer: Debian Libarchive Maintainers Installed-Size: 564 Depends: libarchive1 (= 2.8.5-5) Conflicts: libarchive1 (<< 2.8.5-3) Replaces: libarchive1 (<< 2.8.5-3) Filename: i386/libarchive-dev_2.8.5-5_i386.deb Size: 220170 MD5sum: e3bd09513fd7329527dc2af842374090 SHA1: 928d963d84d023cc994f2412616098fcd8dc0def SHA256: ec1d42ea1f8960bc2b6cd95293fa7c22f7a4bb1ba216978003e4fe559e23c75f Section: libdevel Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Multi-format archive and compression library (development files) The libarchive library provides a flexible interface for reading and writing archives in various formats such as tar and cpio. libarchive also supports reading and writing archives compressed using various compression filters such as gzip and bzip2. The library is inherently stream-oriented; readers serially iterate through the archive, writers serially add things to the archive. In particular, note that there is currently no built-in support for random access nor for in-place modification. . Archive formats supported are: . * tar (read and write, including GNU extensions) * pax (read and write, including GNU and star extensions) * cpio (read and write, including odc and newc variants) * ISO9660 (read only, including Joliet and Rockridge extensions, with some limitations; write support starting with libarchive 2.9) * Zip (read only, with some limitations, uses zlib; write support starting with libarchive 2.8) * mtree (read and write, uses OpenSSL libraries for creating and verifying cryptographic hashes) * shar (write only) * ar (read and write, including BSD and GNU/SysV variants) * empty (read only; in particular, note that no other format will accept an empty file) * raw (read only, starting in libarchive 2.8) * xar (read only, starting in libarchive 2.8) . Filters supported are: . * gzip (read and write, uses zlib) * bzip2 (read and write, uses bzlib) * compress (read and write, uses an internal implementation) * uudecode (read only) * separate command-line compressors with fixed-signature auto-detection * xz and lzma (read and write using liblzma) * lzma (if you lack liblzma, you can get read-only lzma support through the lzmadec library; this will likely be dropped as soon as liblzma is stable and widely-available) * Starting with libarchive 2.7, most of the above will fall back to using command-line tools if the libraries were unavailable at build time. Note that the command-line tools are usually slower than using the libraries directly. . This package provides the files necessary for development with libarchive. Package: libarchive1 Source: libarchive Version: 2.8.5-5 Architecture: amd64 Maintainer: Debian Libarchive Maintainers Installed-Size: 304 Depends: libacl1 (>= 2.2.11-1), libattr1 (>= 2.4.41-1), libbz2-1.0, libc6 (>= 2.7-1), liblzma2, libxml2 (>= 2.6.27), zlib1g (>= 1:1.1.4) Filename: amd64/libarchive1_2.8.5-5_amd64.deb Size: 118586 MD5sum: 924f60e52c261a19993cac0c4ac892d8 SHA1: 641234b03d7a20de2015887b18d7780a14c44323 SHA256: 0aa7df46ed0a755e978db13bd4697c2305cc89579ae111e024862efa9930e52f Section: libs Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Multi-format archive and compression library (shared library) The libarchive library provides a flexible interface for reading and writing archives in various formats such as tar and cpio. libarchive also supports reading and writing archives compressed using various compression filters such as gzip and bzip2. The library is inherently stream-oriented; readers serially iterate through the archive, writers serially add things to the archive. In particular, note that there is currently no built-in support for random access nor for in-place modification. . Archive formats supported are: . * tar (read and write, including GNU extensions) * pax (read and write, including GNU and star extensions) * cpio (read and write, including odc and newc variants) * ISO9660 (read only, including Joliet and Rockridge extensions, with some limitations; write support starting with libarchive 2.9) * Zip (read only, with some limitations, uses zlib; write support starting with libarchive 2.8) * mtree (read and write, uses OpenSSL libraries for creating and verifying cryptographic hashes) * shar (write only) * ar (read and write, including BSD and GNU/SysV variants) * empty (read only; in particular, note that no other format will accept an empty file) * raw (read only, starting in libarchive 2.8) * xar (read only, starting in libarchive 2.8) . Filters supported are: . * gzip (read and write, uses zlib) * bzip2 (read and write, uses bzlib) * compress (read and write, uses an internal implementation) * uudecode (read only) * separate command-line compressors with fixed-signature auto-detection * xz and lzma (read and write using liblzma) * lzma (if you lack liblzma, you can get read-only lzma support through the lzmadec library; this will likely be dropped as soon as liblzma is stable and widely-available) * Starting with libarchive 2.7, most of the above will fall back to using command-line tools if the libraries were unavailable at build time. Note that the command-line tools are usually slower than using the libraries directly. . This package provides the libarchive shared library. Package: libarchive1 Source: libarchive Version: 2.8.5-5 Architecture: i386 Maintainer: Debian Libarchive Maintainers Installed-Size: 292 Depends: libacl1 (>= 2.2.11-1), libattr1 (>= 2.4.41-1), libbz2-1.0, libc6 (>= 2.7-1), liblzma2, libxml2 (>= 2.6.27), zlib1g (>= 1:1.1.4) Filename: i386/libarchive1_2.8.5-5_i386.deb Size: 119980 MD5sum: 21507a912fac6f3fba62ff504da1dcad SHA1: a233702704fab8c4dadfb5f6ba32bf6924562d8e SHA256: 6f6d8a3a3808c8a91f55d3124c908ef3917d7a75de2aa3ebae9b9e8c589e9e3f Section: libs Priority: optional Homepage: http://code.google.com/p/libarchive/ Description: Multi-format archive and compression library (shared library) The libarchive library provides a flexible interface for reading and writing archives in various formats such as tar and cpio. libarchive also supports reading and writing archives compressed using various compression filters such as gzip and bzip2. The library is inherently stream-oriented; readers serially iterate through the archive, writers serially add things to the archive. In particular, note that there is currently no built-in support for random access nor for in-place modification. . Archive formats supported are: . * tar (read and write, including GNU extensions) * pax (read and write, including GNU and star extensions) * cpio (read and write, including odc and newc variants) * ISO9660 (read only, including Joliet and Rockridge extensions, with some limitations; write support starting with libarchive 2.9) * Zip (read only, with some limitations, uses zlib; write support starting with libarchive 2.8) * mtree (read and write, uses OpenSSL libraries for creating and verifying cryptographic hashes) * shar (write only) * ar (read and write, including BSD and GNU/SysV variants) * empty (read only; in particular, note that no other format will accept an empty file) * raw (read only, starting in libarchive 2.8) * xar (read only, starting in libarchive 2.8) . Filters supported are: . * gzip (read and write, uses zlib) * bzip2 (read and write, uses bzlib) * compress (read and write, uses an internal implementation) * uudecode (read only) * separate command-line compressors with fixed-signature auto-detection * xz and lzma (read and write using liblzma) * lzma (if you lack liblzma, you can get read-only lzma support through the lzmadec library; this will likely be dropped as soon as liblzma is stable and widely-available) * Starting with libarchive 2.7, most of the above will fall back to using command-line tools if the libraries were unavailable at build time. Note that the command-line tools are usually slower than using the libraries directly. . This package provides the libarchive shared library. Package: libevent-1.4-2 Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: amd64 Maintainer: Anibal Monsalve Salazar Installed-Size: 164 Depends: libc6 (>= 2.7-1) Filename: amd64/libevent-1.4-2_1.4.13-stable-1~bpo50+1_amd64.deb Size: 62002 MD5sum: d2979dc7124a9805059e5ca90be813a5 SHA1: d24567958ec966cb1543d02364959f909e167fd4 SHA256: 48de6c84c0aa278d4e3cc22e98a4bdaef943dac037c43690a9822c99342d6ce0 Section: libs Priority: standard Homepage: http://www.monkey.org/~provos/libevent/ Description: An asynchronous event notification library The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . libevent is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . For backward compatibility and to transition to libevent_core only or libevent_core and libevent_extra, the libevent source package builds the libevent library that includes everything in libevent_core and libevent_extra. Package: libevent-1.4-2 Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: i386 Maintainer: Anibal Monsalve Salazar Installed-Size: 152 Depends: libc6 (>= 2.7-1) Filename: i386/libevent-1.4-2_1.4.13-stable-1~bpo50+1_i386.deb Size: 56690 MD5sum: 7cf45c717fe4e22c23512085738afb89 SHA1: 0e77ed437fb8372d2a7d725c9b854290e01c4de1 SHA256: cb5110bb0e3981c1a59a0f8b8bb337160df9eef890f370fd23b40b15f131f80f Section: libs Priority: standard Homepage: http://www.monkey.org/~provos/libevent/ Description: An asynchronous event notification library The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . libevent is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . For backward compatibility and to transition to libevent_core only or libevent_core and libevent_extra, the libevent source package builds the libevent library that includes everything in libevent_core and libevent_extra. Package: libevent-core-1.4-2 Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: amd64 Maintainer: Anibal Monsalve Salazar Installed-Size: 96 Depends: libc6 (>= 2.7-1) Filename: amd64/libevent-core-1.4-2_1.4.13-stable-1~bpo50+1_amd64.deb Size: 31320 MD5sum: 5c3c0ef25af519ece09b0990055e780f SHA1: c2e4124e1996fe0651bec0810dacc1663ec8ff94 SHA256: 0a9ee00b99ce518440dda30ab9b849fd1875cbd2b79203bbb60483ac81a3da92 Section: libs Priority: optional Homepage: http://www.monkey.org/~provos/libevent/ Description: An asynchronous event notification library (core) The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . libevent is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . The libevent_core library includes event loops, timers, buffer code, and various small compatibility functions. . If you're writing software that only uses libevent's event loop, you should link against only the libevent_core library. Package: libevent-core-1.4-2 Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: i386 Maintainer: Anibal Monsalve Salazar Installed-Size: 88 Depends: libc6 (>= 2.7-1) Filename: i386/libevent-core-1.4-2_1.4.13-stable-1~bpo50+1_i386.deb Size: 28982 MD5sum: bd6da7d151e11cb8648cf0c3696ea320 SHA1: 77b0a667562683f5e79c95078642fc892c077a3b SHA256: e99d71026354e960038de5c3841c99068f2644ad27c43e4008a4a25c1803230c Section: libs Priority: optional Homepage: http://www.monkey.org/~provos/libevent/ Description: An asynchronous event notification library (core) The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . libevent is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . The libevent_core library includes event loops, timers, buffer code, and various small compatibility functions. . If you're writing software that only uses libevent's event loop, you should link against only the libevent_core library. Package: libevent-dev Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: amd64 Maintainer: Anibal Monsalve Salazar Installed-Size: 580 Depends: libevent-1.4-2 (= 1.4.13-stable-1~bpo50+1), libevent-core-1.4-2 (= 1.4.13-stable-1~bpo50+1), libevent-extra-1.4-2 (= 1.4.13-stable-1~bpo50+1) Filename: amd64/libevent-dev_1.4.13-stable-1~bpo50+1_amd64.deb Size: 173212 MD5sum: 321c447ca52a2a313d213bb13f90dbd1 SHA1: fc0b425503c88d819430622b43a815a2bfb5f52b SHA256: baddc919db13bab6dba156c8b07843916efebe6aae423f841fd72776436dfb4e Section: libdevel Priority: optional Homepage: http://www.monkey.org/~provos/libevent/ Description: Development libraries, header files and docs for libevent Contains the header files, documentation, examples and static libraries for use in developing applications that use the libevent library. . The libevent library is an asynchronous event notification library that provides a mechanish to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Package: libevent-dev Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: i386 Maintainer: Anibal Monsalve Salazar Installed-Size: 452 Depends: libevent-1.4-2 (= 1.4.13-stable-1~bpo50+1), libevent-core-1.4-2 (= 1.4.13-stable-1~bpo50+1), libevent-extra-1.4-2 (= 1.4.13-stable-1~bpo50+1) Filename: i386/libevent-dev_1.4.13-stable-1~bpo50+1_i386.deb Size: 151372 MD5sum: 5c8463dcf525572f0de33f027c08d942 SHA1: be063539710af6e53feafb31ebc4afca3c8783d1 SHA256: 58542d2b6fd713b901943fa93af89f9dc2835de8cf75fc52898882136d378f90 Section: libdevel Priority: optional Homepage: http://www.monkey.org/~provos/libevent/ Description: Development libraries, header files and docs for libevent Contains the header files, documentation, examples and static libraries for use in developing applications that use the libevent library. . The libevent library is an asynchronous event notification library that provides a mechanish to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Package: libevent-extra-1.4-2 Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: amd64 Maintainer: Anibal Monsalve Salazar Installed-Size: 144 Depends: libc6 (>= 2.7-1), libevent-core-1.4-2 (= 1.4.13-stable-1~bpo50+1) Filename: amd64/libevent-extra-1.4-2_1.4.13-stable-1~bpo50+1_amd64.deb Size: 51648 MD5sum: 250f094f9b699ea67864759bc43afc7f SHA1: 4b90be463f49e0493fb4ebe8214220aa8339c500 SHA256: ee23bff0ee9f1bf6e62797825dff6ed5ff73f5ab0e0cbbb8219fbb95e21c26b3 Section: libs Priority: optional Homepage: http://www.monkey.org/~provos/libevent/ Description: An asynchronous event notification library (extra) The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . libevent is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . The libevent_extra library includes code for HTTP, DNS, RPC, and so on. . If you're writing software that uses libevent's protocol support, you need to link libevent_core and libevent_extra as well. Package: libevent-extra-1.4-2 Source: libevent Version: 1.4.13-stable-1~bpo50+1 Architecture: i386 Maintainer: Anibal Monsalve Salazar Installed-Size: 132 Depends: libc6 (>= 2.7-1), libevent-core-1.4-2 (= 1.4.13-stable-1~bpo50+1) Filename: i386/libevent-extra-1.4-2_1.4.13-stable-1~bpo50+1_i386.deb Size: 47638 MD5sum: 27bf68973a94f732731c0f575909da5d SHA1: 6e47215f3e69a49be3ff591ec66a1f1ad74b20e4 SHA256: c431c022fee5e456cfc0ff1d696e8090dd265853cd0b7e20389d2d3d79a8df83 Section: libs Priority: optional Homepage: http://www.monkey.org/~provos/libevent/ Description: An asynchronous event notification library (extra) The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. . libevent is meant to replace the asynchronous event loop found in event driven network servers. Currently, libevent supports /dev/poll, kqueue(2), event ports, select(2), poll(2) and epoll(4). . The libevent_extra library includes code for HTTP, DNS, RPC, and so on. . If you're writing software that uses libevent's protocol support, you need to link libevent_core and libevent_extra as well. Package: libfribidi-bin Source: fribidi Version: 0.19.2-4 Architecture: amd64 Maintainer: Debian Hebrew Packaging Team Installed-Size: 72 Depends: libc6 (>= 2.7-1), libfribidi0 (>= 0.19.2) Conflicts: libfribidi0 (<< 0.19.2-3) Replaces: libfribidi0 (<< 0.19.2-3) Filename: amd64/libfribidi-bin_0.19.2-4_amd64.deb Size: 19736 MD5sum: 5db7c3ac841d14a821f5d90d9eb84273 SHA1: 3e9d84d8fc3c0789e81b9acd89f52ac6fcfcecf5 SHA256: 2d56a90bc8653861cbbe53eacbb018570f43f8391708c7d92134488a12141466 Section: utils Priority: optional Homepage: http://www.fribidi.org/ Description: Free Implementation of the Unicode BiDi algorithm (utility) FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains a command line interface for the fribidi library. Package: libfribidi-bin Source: fribidi Version: 0.19.2-4 Architecture: i386 Maintainer: Debian Hebrew Packaging Team Installed-Size: 68 Depends: libc6 (>= 2.7-1), libfribidi0 (>= 0.19.2) Conflicts: libfribidi0 (<< 0.19.2-3) Replaces: libfribidi0 (<< 0.19.2-3) Filename: i386/libfribidi-bin_0.19.2-4_i386.deb Size: 19328 MD5sum: 055c4ab1b836a9d1f2528603bc48e4ee SHA1: 653dd062eeea6a625456c873e8177f5c5e67b1a4 SHA256: d205396b8610ac3d88e1c4ad7b0150555990b1fe09b60d31b103cb344226a900 Section: utils Priority: optional Homepage: http://www.fribidi.org/ Description: Free Implementation of the Unicode BiDi algorithm (utility) FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains a command line interface for the fribidi library. Package: libfribidi-dev Source: fribidi Version: 0.19.2-4 Architecture: amd64 Maintainer: Debian Hebrew Packaging Team Installed-Size: 420 Depends: libfribidi0 (= 0.19.2-4) Filename: amd64/libfribidi-dev_0.19.2-4_amd64.deb Size: 78314 MD5sum: ec98444b3452918b80101033169df3e3 SHA1: 73460f2d35ae82084475647980539d0922de3723 SHA256: c621ae59c3b027d10ed3de50c8852002786c29f0dfd54d0066006d37ec0ea11d Section: libdevel Priority: optional Homepage: http://www.fribidi.org/ Description: Development files for FreeBidi library FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains the header files and static libraries for the FriBidi C library. Package: libfribidi-dev Source: fribidi Version: 0.19.2-4 Architecture: i386 Maintainer: Debian Hebrew Packaging Team Installed-Size: 400 Depends: libfribidi0 (= 0.19.2-4) Filename: i386/libfribidi-dev_0.19.2-4_i386.deb Size: 76732 MD5sum: 1fb73a3d7eb1a5e6443d73742a1ad115 SHA1: 496e86815f2dd1eea75c9fdd98bc1a86bf3562cb SHA256: e77d540a3f264cdbe135cb7989bec5754b24e945031c62c37916d266f91b3cbf Section: libdevel Priority: optional Homepage: http://www.fribidi.org/ Description: Development files for FreeBidi library FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains the header files and static libraries for the FriBidi C library. Package: libfribidi0 Source: fribidi Version: 0.19.2-4 Architecture: amd64 Maintainer: Debian Hebrew Packaging Team Installed-Size: 160 Depends: libc6 (>= 2.7-1) Filename: amd64/libfribidi0_0.19.2-4_amd64.deb Size: 36090 MD5sum: 8aeac3aa351ee223567d55db75fd9822 SHA1: 990c825acf7e620759d997895e8d3f65cec8cb86 SHA256: d60a53ca61c7f02db7c21232828de796a56bb7666438c3286aa22e06253b65f9 Section: libs Priority: optional Homepage: http://www.fribidi.org/ Description: Free Implementation of the Unicode BiDi algorithm FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains the shared libraries. Package: libfribidi0 Source: fribidi Version: 0.19.2-4 Architecture: i386 Maintainer: Debian Hebrew Packaging Team Installed-Size: 156 Depends: libc6 (>= 2.7-1) Filename: i386/libfribidi0_0.19.2-4_i386.deb Size: 34452 MD5sum: 533dcb5346ce5b74c0def94c6c9ad9d6 SHA1: c994c92bff6b11af2fc729071933e05a48423d12 SHA256: 0fcacb9e87fc55b4416365c4f4da659c22cf2840ee1bc2d6fd06f28e9a6f8ab0 Section: libs Priority: optional Homepage: http://www.fribidi.org/ Description: Free Implementation of the Unicode BiDi algorithm FriBiDi is a BiDi algorithm implementation for Hebrew and/or Arabic languages. This package contains the shared libraries. Package: libfuse-dev Source: fuse Version: 2.8.7-2.1 Architecture: amd64 Maintainer: Daniel Baumann Installed-Size: 616 Depends: libfuse2 (= 2.8.7-2.1), libselinux-dev Suggests: fuse Filename: amd64/libfuse-dev_2.8.7-2.1_amd64.deb Size: 152908 MD5sum: 3c7d44124b4b47fbdfebfe04614d2cf6 SHA1: c232c8ddfb577e7971c99d0eea07b89656e55383 SHA256: ea6912a1ca423edbbc343832886171b518c8a93e4d489c690dd3fdfed9c53176 Section: libdevel Priority: optional Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace (development) Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. . This package contains the development files. Package: libfuse-dev Source: fuse Version: 2.8.7-2.1 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 496 Depends: libfuse2 (= 2.8.7-2.1), libselinux-dev Suggests: fuse Filename: i386/libfuse-dev_2.8.7-2.1_i386.deb Size: 140784 MD5sum: 589cc3f90aca761d2b9a390f804314e4 SHA1: cfcc48815e3ae87d42f04d2caf318f3a384d57fb SHA256: 07427216a8d5dd9767f1567a252aa2d68222fae59e6c913ecfc3902f30ef38cc Section: libdevel Priority: optional Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace (development) Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. . This package contains the development files. Package: libfuse2 Source: fuse Version: 2.8.7-2.1 Architecture: amd64 Maintainer: Daniel Baumann Installed-Size: 380 Depends: libc6 (>= 2.7-1) Suggests: fuse Conflicts: fuse (<< 2.8.7-2.1) Filename: amd64/libfuse2_2.8.7-2.1_amd64.deb Size: 144994 MD5sum: 101b5305aa8c2a5bd3e7975fd66ea910 SHA1: 8e905419488899f020117e9388f059edcadd8517 SHA256: 7da8423f4b82b11f18a6d095b55c67f00a15a671b74f0c2ce9f57a9e21e8d038 Section: libs Priority: optional Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace (library) Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. . This package contains the shared library. Package: libfuse2 Source: fuse Version: 2.8.7-2.1 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 320 Depends: libc6 (>= 2.7-1) Suggests: fuse Conflicts: fuse (<< 2.8.7-2.1) Filename: i386/libfuse2_2.8.7-2.1_i386.deb Size: 138072 MD5sum: 012932a432323018f9ac3fb19ba429b8 SHA1: fcd7fe01768fc1c664dc555fd86a468fc315d1ed SHA256: da7baac1c3b28a949e7c14a6c5231698d1d841e4db55c5ed917c7d2edd201b9d Section: libs Priority: optional Homepage: http://fuse.sourceforge.net/ Description: Filesystem in Userspace (library) Filesystem in Userspace (FUSE) is a simple interface for userspace programs to export a virtual filesystem to the Linux kernel. It also aims to provide a secure method for non privileged users to create and mount their own filesystem implementations. . This package contains the shared library. Package: libgio-fam Source: glib2.0 Version: 2.24.2-2 Architecture: amd64 Maintainer: Loic Minier Installed-Size: 192 Recommends: fam | gamin, libglib2.0-0 (>= 2.24.2-2) Filename: amd64/libgio-fam_2.24.2-2_amd64.deb Size: 896098 MD5sum: 85d091652b66ba3076ce4fada6c2d423 SHA1: df9a31c1e61b4fe375d8bd63c8c691a6cab37ae5 SHA256: a88d8b6814c5e73453f47c43864bdaec4460c78363f2300be40c935f1d2c2540 Section: libs Priority: optional Homepage: http://www.gtk.org/ Description: GLib Input, Output and Streaming Library (fam module) GIO is the input, output and streaming API of GLib. This package provides a fam file and directory monitoring backend for it. Package: libgio-fam Source: glib2.0 Version: 2.24.2-2 Architecture: i386 Maintainer: Loic Minier Installed-Size: 192 Recommends: fam | gamin, libglib2.0-0 (>= 2.24.2-2) Filename: i386/libgio-fam_2.24.2-2_i386.deb Size: 895982 MD5sum: 0e30a672d800bb4ecbb1706d9fd82a87 SHA1: 6a265bc28e2c14d67aa857175efa3e6612ad1da1 SHA256: d224bd4a92a3b85a62ed59c4d7da1e099aa1076dec83eea9443496272c47770a Section: libs Priority: optional Homepage: http://www.gtk.org/ Description: GLib Input, Output and Streaming Library (fam module) GIO is the input, output and streaming API of GLib. This package provides a fam file and directory monitoring backend for it. Package: libglib2.0-0 Source: glib2.0 Version: 2.24.2-2 Architecture: amd64 Maintainer: Loic Minier Installed-Size: 2088 Depends: libc6 (>= 2.7-1), libpcre3 (>= 8.10), libselinux1 (>= 2.0.59), zlib1g (>= 1:1.1.4) Recommends: libglib2.0-data, shared-mime-info Conflicts: libpango1.0-0 (<< 1.11) Replaces: libglib2.0-dev (<< 2.23.2-2) Filename: amd64/libglib2.0-0_2.24.2-2_amd64.deb Size: 4387900 MD5sum: bd6c98fd9f82927ceba233b0fd90814d SHA1: 6f660b92903957344a820a1bda3dee848ba982d7 SHA256: 9b33af1b29263cf2365fec3ab9910f9860c50fc0ee672ece23422c6595ddd6a4 Section: libs Priority: optional Homepage: http://www.gtk.org/ Description: The GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Package: libglib2.0-0 Source: glib2.0 Version: 2.24.2-2 Architecture: i386 Maintainer: Loic Minier Installed-Size: 1860 Depends: libc6 (>= 2.7-1), libpcre3 (>= 8.10), libselinux1 (>= 2.0.59), zlib1g (>= 1:1.1.4) Recommends: libglib2.0-data, shared-mime-info Conflicts: libpango1.0-0 (<< 1.11) Replaces: libglib2.0-dev (<< 2.23.2-2) Filename: i386/libglib2.0-0_2.24.2-2_i386.deb Size: 4110770 MD5sum: 30eece6da5cf5ebfa6ae4c4c03400d55 SHA1: 55ee06c8df37d6077e6f28018ea920bc44da2838 SHA256: 63cb2dacf24579ddc4e74d209c19086ef4a480d63504fe71eec9720e29d93e69 Section: libs Priority: optional Homepage: http://www.gtk.org/ Description: The GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Package: libglib2.0-0-dbg Source: glib2.0 Version: 2.24.2-2 Architecture: amd64 Maintainer: Loic Minier Installed-Size: 4648 Depends: libglib2.0-0 (= 2.24.2-2) Conflicts: libglib2.0-dbg Replaces: libglib2.0-dbg Filename: amd64/libglib2.0-0-dbg_2.24.2-2_amd64.deb Size: 9567872 MD5sum: e5df8df3e37ccbcac8d54c8ed3c64b13 SHA1: 8fe631196a25b2b8a2bd149f54ba254b17a53e3c SHA256: 7b937792c5da2eb71a1ab25797f1d7efbdfa2848f0a57fbded89324c78a42b88 Section: debug Priority: extra Homepage: http://www.gtk.org/ Description: The GLib libraries and debugging symbols GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains detached debugging symbols. . Most people will not need this package. Package: libglib2.0-0-dbg Source: glib2.0 Version: 2.24.2-2 Architecture: i386 Maintainer: Loic Minier Installed-Size: 4840 Depends: libglib2.0-0 (= 2.24.2-2) Conflicts: libglib2.0-dbg Replaces: libglib2.0-dbg Filename: i386/libglib2.0-0-dbg_2.24.2-2_i386.deb Size: 11956180 MD5sum: ae0a3fd3cb383d692a8f5a9932876c76 SHA1: a5daf3dd51b2a508e193196b2d2805f86ddb415f SHA256: 880aee7ed99d77c84cca87660459fb2659fa2e810a9ca70f57d77446b5f41a44 Section: debug Priority: extra Homepage: http://www.gtk.org/ Description: The GLib libraries and debugging symbols GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains detached debugging symbols. . Most people will not need this package. Package: libglib2.0-0-refdbg Source: glib2.0 Version: 2.24.2-2 Architecture: amd64 Maintainer: Loic Minier Installed-Size: 1048 Depends: libc6 (>= 2.7-1), libpcre3 (>= 8.10), libglib2.0-0 (= 2.24.2-2) Filename: amd64/libglib2.0-0-refdbg_2.24.2-2_amd64.deb Size: 2352498 MD5sum: 55006a5f1b68d3dbf0d643213f77bc7f SHA1: edee030c8126d1b178c83a3de164f46885467f16 SHA256: dbf6d25ef99daeb9b8d7c68fa61d8d09bc8e44f925d4a8391b48150930464415 Section: debug Priority: extra Homepage: http://www.gtk.org/ Description: The GLib library of C routines - refdbg library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared library built with --disable-visibility so that it can be used with refdbg, a GObject refcount debugger. Package: libglib2.0-0-refdbg Source: glib2.0 Version: 2.24.2-2 Architecture: i386 Maintainer: Loic Minier Installed-Size: 1032 Depends: libc6 (>= 2.7-1), libpcre3 (>= 8.10), libglib2.0-0 (= 2.24.2-2) Filename: i386/libglib2.0-0-refdbg_2.24.2-2_i386.deb Size: 2515984 MD5sum: 8f4b54d35ab1a1a394593b8934c49b02 SHA1: 37cdec3688c35e0de4aea3f001212cd4e9369404 SHA256: abbaef6231df656b49953efc58f7f3d9d4c037baa3ad617460b67be756ca39fb Section: debug Priority: extra Homepage: http://www.gtk.org/ Description: The GLib library of C routines - refdbg library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared library built with --disable-visibility so that it can be used with refdbg, a GObject refcount debugger. Package: libglib2.0-data Source: glib2.0 Version: 2.24.2-2 Architecture: all Maintainer: Loic Minier Installed-Size: 4388 Depends: libglib2.0-0 (>= 2.24.2-2) Conflicts: libglib1.3-data Replaces: libglib1.3, libglib1.3-data Filename: all/libglib2.0-data_2.24.2-2_all.deb Size: 6725086 MD5sum: d39b630922bd452f733c77f5f1b79e13 SHA1: 1fe1c940a06658eb8dac64f4ba24b6093bf82049 SHA256: 0c960231820460ac5b91a7fd878166044df51e1707da582ff71819052e32b7cd Section: libs Priority: optional Homepage: http://www.gtk.org/ Description: Common files for GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed for the runtime libraries to display messages in languages other than English. Package: libglib2.0-dev Source: glib2.0 Version: 2.24.2-2 Architecture: amd64 Maintainer: Loic Minier Installed-Size: 5312 Depends: libc6 (>= 2.7-1), libpcre3 (>= 8.10), libglib2.0-0 (= 2.24.2-2), pkg-config (>= 0.14.0), zlib1g-dev Recommends: python Suggests: libglib2.0-doc Conflicts: libglib1.3-dev Replaces: libglib1.3-dev Filename: amd64/libglib2.0-dev_2.24.2-2_amd64.deb Size: 4949712 MD5sum: eaca4157f2b61151f6b28503aedb432d SHA1: 8ebaf96cfafac9220b83bbcfae0be99a407e896c SHA256: 3e7a3836a8b8b63352d0d799b1ef74a50836411c2dba0944e91442b5ff4d10ce Section: libdevel Priority: optional Homepage: http://www.gtk.org/ Description: Development files for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed to compile programs against libglib2.0-0, as only it includes the header files and static libraries (optionally) needed for compiling. Package: libglib2.0-dev Source: glib2.0 Version: 2.24.2-2 Architecture: i386 Maintainer: Loic Minier Installed-Size: 4120 Depends: libc6 (>= 2.7-1), libpcre3 (>= 8.10), libglib2.0-0 (= 2.24.2-2), pkg-config (>= 0.14.0), zlib1g-dev Recommends: python Suggests: libglib2.0-doc Conflicts: libglib1.3-dev Replaces: libglib1.3-dev Filename: i386/libglib2.0-dev_2.24.2-2_i386.deb Size: 4396676 MD5sum: 46f94d9454ac3105a16456ce12ed619b SHA1: 32ce14e85c18b67487b58174153fce483bc54815 SHA256: ff33a048bbad5a6dcccc230cec90af9d7eda3a3d07ae7a5ef093377cc764248f Section: libdevel Priority: optional Homepage: http://www.gtk.org/ Description: Development files for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed to compile programs against libglib2.0-0, as only it includes the header files and static libraries (optionally) needed for compiling. Package: libglib2.0-doc Source: glib2.0 Version: 2.24.2-2 Architecture: all Maintainer: Loic Minier Installed-Size: 13976 Depends: lynx | www-browser Suggests: libgtk2.0-doc Conflicts: libglib1.3-doc Replaces: libglib1.3-doc Filename: all/libglib2.0-doc_2.24.2-2_all.deb Size: 10920086 MD5sum: 9293aa849dc758736952a0e3ee18796d SHA1: 781d7cf74c23b1bde4b3e0f4b693574cb8541eb8 SHA256: cd54c18be409ef73bd0834ba8b92ce8965a3a167df36ccb42229a69e8f78f980 Section: doc Priority: optional Homepage: http://www.gtk.org/ Description: Documentation files for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the HTML documentation for the GLib library in /usr/share/doc/libglib2.0-doc/ . Package: libgnutls-dev Source: gnutls26 Version: 2.9.12-2 Architecture: amd64 Maintainer: Debian GnuTLS Maintainers Installed-Size: 2228 Depends: libgnutls26 (= 2.9.12-2), libgnutlsxx26 (= 2.9.12-2), libgcrypt11-dev (>= 1.3.0), libc6-dev | libc-dev, zlib1g-dev, libtasn1-3-dev (>= 0.3.4) Suggests: gnutls-doc, gnutls-bin, guile-gnutls Conflicts: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls11-dev Replaces: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls11-dev Provides: gnutls-dev Filename: amd64/libgnutls-dev_2.9.12-2_amd64.deb Size: 3331498 MD5sum: 394592a6ab0ef00716467df00f3a1c44 SHA1: fc8305bddaa8d28ac85e9777289e05d43207ea1b SHA256: 43a2948c96716796326eb7dc07111485f64f6be58335b9ff1159a2b5e2df03e1 Section: libdevel Priority: optional Homepage: http://www.gnutls.org/ Description: the GNU TLS library - development files gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the gnutls development files. Package: libgnutls-dev Source: gnutls26 Version: 2.9.12-2 Architecture: i386 Maintainer: Debian GnuTLS Maintainers Installed-Size: 1712 Depends: libgnutls26 (= 2.9.12-2), libgnutlsxx26 (= 2.9.12-2), libgcrypt11-dev (>= 1.3.0), libc6-dev | libc-dev, zlib1g-dev, libtasn1-3-dev (>= 0.3.4) Suggests: gnutls-doc, gnutls-bin, guile-gnutls Conflicts: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls11-dev Replaces: gnutls-dev (<< 0.4.0-0), gnutls0.4-dev, libgnutls11-dev Provides: gnutls-dev Filename: i386/libgnutls-dev_2.9.12-2_i386.deb Size: 3112844 MD5sum: b4bfcad0964a84ae22c90b14a83bb5ca SHA1: 0f203446db2089cac7fea85f96862ab74bd84f82 SHA256: aec6facdea826fce66d7dd9edb0b678ce49e5817c4418407921b2982c30e8e64 Section: libdevel Priority: optional Homepage: http://www.gnutls.org/ Description: the GNU TLS library - development files gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the gnutls development files. Package: libgnutls26 Source: gnutls26 Version: 2.9.12-2 Architecture: amd64 Maintainer: Debian GnuTLS Maintainers Installed-Size: 1424 Depends: libc6 (>= 2.7-1), libgcrypt11 (>= 1.4.0), libgpg-error0 (>= 1.4), libtasn1-3 (>= 0.3.4), zlib1g (>= 1:1.1.4) Suggests: gnutls-bin Conflicts: gnutls0, gnutls0.4 Replaces: gnutls0, gnutls0.4, gnutls3 Filename: amd64/libgnutls26_2.9.12-2_amd64.deb Size: 3003766 MD5sum: a3c8b05f3e62ba3b0199d25e1e7bba3c SHA1: 4c2026c635f84166b359bc544564e9ba0c64dcce SHA256: d5b08f52d1c26bcf441c01f4712a47037fa896f97b4296f09bc9910a8303a844 Section: libs Priority: standard Homepage: http://www.gnutls.org/ Description: the GNU TLS library - runtime library gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the runtime libraries. Package: libgnutls26 Source: gnutls26 Version: 2.9.12-2 Architecture: i386 Maintainer: Debian GnuTLS Maintainers Installed-Size: 1356 Depends: libc6 (>= 2.7-1), libgcrypt11 (>= 1.4.0), libgpg-error0 (>= 1.4), libtasn1-3 (>= 0.3.4), zlib1g (>= 1:1.1.4) Suggests: gnutls-bin Conflicts: gnutls0, gnutls0.4 Replaces: gnutls0, gnutls0.4, gnutls3 Filename: i386/libgnutls26_2.9.12-2_i386.deb Size: 2761460 MD5sum: d95d97293717d4d1d395a0f7fd8d6e0b SHA1: e35f44423a75ecfccda14fe25f35ecd7daf1a1a8 SHA256: dea2fc3efe2ba699cbcccbe80210974568f5bb6e4260fa1d8b923112837d9238 Section: libs Priority: standard Homepage: http://www.gnutls.org/ Description: the GNU TLS library - runtime library gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the runtime libraries. Package: libgnutls26-dbg Source: gnutls26 Version: 2.9.12-2 Architecture: amd64 Maintainer: Debian GnuTLS Maintainers Installed-Size: 3728 Depends: libgnutls26 (= 2.9.12-2) Conflicts: libgnutls13-dbg Filename: amd64/libgnutls26-dbg_2.9.12-2_amd64.deb Size: 8720312 MD5sum: 8458184abd6ca634c15941e9ca6a4e76 SHA1: 5170d927e1970badcf6ff09349afa1e1cca43ee0 SHA256: 0d3a6d1feff1f4f2b39aa5cd1fa9a0e2e6143f1579e7665ac909bc7b5c3cf7b7 Section: debug Priority: extra Homepage: http://www.gnutls.org/ Description: GNU TLS library - debugger symbols gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the debugger symbols. Package: libgnutls26-dbg Source: gnutls26 Version: 2.9.12-2 Architecture: i386 Maintainer: Debian GnuTLS Maintainers Installed-Size: 3084 Depends: libgnutls26 (= 2.9.12-2) Conflicts: libgnutls13-dbg Filename: i386/libgnutls26-dbg_2.9.12-2_i386.deb Size: 8407196 MD5sum: 22ca4f5b0d508b8e03e7022475deec53 SHA1: 89ff75712a86eb8739bc399190452aa457eb7d78 SHA256: 66c248c6e9d94208e88ddaa802c58476deff1ff5cc4843a91d164b82fe4c588c Section: debug Priority: extra Homepage: http://www.gnutls.org/ Description: GNU TLS library - debugger symbols gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the debugger symbols. Package: libgnutlsxx26 Source: gnutls26 Version: 2.9.12-2 Architecture: amd64 Maintainer: Debian GnuTLS Maintainers Installed-Size: 360 Depends: libgnutls26 (= 2.9.12-2), libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Filename: amd64/libgnutlsxx26_2.9.12-2_amd64.deb Size: 1442160 MD5sum: 31d10d28a01512dbd3a605c3c4dc52ab SHA1: 8fa6f49408c30949a41a325d8c3e747372f4e030 SHA256: 12e2a2a40d14c9e484354bfc1c6178381637e6e7e28ec20988ec273cc5049c9f Section: libs Priority: extra Homepage: http://www.gnutls.org/ Description: the GNU TLS library - C++ runtime library gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the C++ runtime libraries. Package: libgnutlsxx26 Source: gnutls26 Version: 2.9.12-2 Architecture: i386 Maintainer: Debian GnuTLS Maintainers Installed-Size: 356 Depends: libgnutls26 (= 2.9.12-2), libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Filename: i386/libgnutlsxx26_2.9.12-2_i386.deb Size: 1440350 MD5sum: 921c6b7c1b2e494c288c63fc40a07938 SHA1: ba4e26bb04fd45d8c935483f4fad3ef4308db9f5 SHA256: f77d4ecdbb84588d305b9a42bf16127f2cb7af3a02c66300dce30a934a3d2a17 Section: libs Priority: extra Homepage: http://www.gnutls.org/ Description: the GNU TLS library - C++ runtime library gnutls is a portable library which implements the Transport Layer Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols. . Currently gnutls implements: - the TLS 1.0 and SSL 3.0 protocols, without any US-export controlled algorithms - X509 Public Key Infrastructure (with several limitations). - SRP for TLS authentication. - TLS Extension mechanism . This package contains the C++ runtime libraries. Package: libhugetlbfs-bin Source: libhugetlbfs Version: 2.23-4vnz0 Architecture: i386 Maintainer: Punit Agrawal Installed-Size: 300 Depends: libc6 (>= 2.7-1) Suggests: libhugetlbfs Breaks: libhugetlbfs0 (<< 2.20-4) Replaces: libhugetlbfs0 (<< 2.20-4) Filename: i386/libhugetlbfs-bin_2.23-4vnz0_i386.deb Size: 67036 MD5sum: 76a8e8895c37a13b66adea63ee85fee8 SHA1: ab14427a186c729a014b8ccbe3b0906946c7706f SHA256: 732910b8c5e78ab1adcfdeb24b82433cdffcc02cfe33bd1a86175812b8a37304 Section: utils Priority: optional Homepage: https://github.com/libhugetlbfs/libhugetlbfs Description: Tools to ease use of hugetlbfs libhugetlbfs is a library which provides easy access to huge pages of memory. It is a wrapper for the hugetlbfs file system. Applications can use huge pages to fulfill malloc() requests without being recompiled by using LD_PRELOAD. . The package provies the following userspace tools to help with huge page usability, environment setup, and control: . hugeadm: Configure the system huge page pools. hugectl: Control policy for backing text, data and malloc() with hugepages. hugeedit: Set default policy for backing text and data with hugepages. pagesize: Print supported system page sizes. Package: libhugetlbfs-dev Source: libhugetlbfs Version: 2.23-4vnz0 Architecture: i386 Maintainer: Punit Agrawal Installed-Size: 192 Depends: libhugetlbfs0 (= 2.23-4vnz0) Filename: i386/libhugetlbfs-dev_2.23-4vnz0_i386.deb Size: 48018 MD5sum: 07d92adb9f11fcd102c67dd626bff2cb SHA1: 4bc693ac4ccf0507c2d9fb49124b9b4b5bc8a8b6 SHA256: fe746ad569937612519b6714535259aa56e261746b4ab2f3b96a52bea320d109 Section: libdevel Priority: optional Homepage: https://github.com/libhugetlbfs/libhugetlbfs Description: Development files to build programs using libhugetlbfs libhugetlbfs is a library which provides easy access to huge pages of memory. It is a wrapper for the hugetlbfs file system. Applications can use huge pages to fulfill malloc() requests without being recompiled by using LD_PRELOAD. Alternatively, applications can be linked against libhugetlbfs without source modifications to load text or BSS or BSS, data, and text segments into large pages. The library also comes with several userspace tools to help with huge page usability, environment setup, and control. . This package ships the library development files. Package: libhugetlbfs0 Source: libhugetlbfs Version: 2.23-4vnz0 Architecture: i386 Maintainer: Punit Agrawal Installed-Size: 156 Depends: libc6 (>= 2.7-1) Filename: i386/libhugetlbfs0_2.23-4vnz0_i386.deb Size: 53042 MD5sum: 92402b684531d86e0e548d4c35d6b20f SHA1: 5ce2a69ca93c1382677f294ba287617d95610891 SHA256: 0948b3706a8c70603638e5f2af3ece9c8f1a93edfc52bd2c14093dda78f646b7 Section: libs Priority: optional Homepage: https://github.com/libhugetlbfs/libhugetlbfs Description: Preload library to back program memory with hugepages libhugetlbfs is a library which provides easy access to huge pages of memory. It is a wrapper for the hugetlbfs file system. Applications can use huge pages to fulfill malloc() requests without being recompiled by using LD_PRELOAD. Alternatively, applications can be linked against libhugetlbfs without source modifications to load text or BSS or BSS, data, and text segments into large pages. The library also comes with several userspace tools to help with huge page usability, environment setup, and control. Package: libjemalloc-dev Source: jemalloc Version: 3.6.0-8vnz1 Architecture: amd64 Maintainer: Stig Sandbeck Mathisen Installed-Size: 1032 Depends: libjemalloc1 (= 3.6.0-8vnz1) Filename: amd64/libjemalloc-dev_3.6.0-8vnz1_amd64.deb Size: 275790 MD5sum: e27cfae0c257fc91ecf46dbd4e8e1b9a SHA1: d06a2c3c476b20ea21322ea8df20dae1c4958e58 SHA256: 272f0842cc7af61a6a44c25480a22125a0d507dc1a44c456a3d5f4b7b002158a Section: libdevel Priority: extra Homepage: http://www.canonware.com/jemalloc/ Description: development files and documentation for jemalloc Files used for development with jemalloc. This package contains headers and documentation. . Jemalloc is a library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. Package: libjemalloc-dev Source: jemalloc Version: 3.6.0-8vnz1 Architecture: i386 Maintainer: Stig Sandbeck Mathisen Installed-Size: 788 Depends: libjemalloc1 (= 3.6.0-8vnz1) Filename: i386/libjemalloc-dev_3.6.0-8vnz1_i386.deb Size: 256744 MD5sum: e1cbf1ae41a149b4979f33a3600f3581 SHA1: aa32f1e65b8b4a01a71fb37f158a71b14c03061e SHA256: 4b1412b88194d3ddac0d5a8fbbee61140e0feef841803424a682bf4756c6e148 Section: libdevel Priority: extra Homepage: http://www.canonware.com/jemalloc/ Description: development files and documentation for jemalloc Files used for development with jemalloc. This package contains headers and documentation. . Jemalloc is a library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. Package: libjemalloc1 Source: jemalloc Version: 3.6.0-8vnz1 Architecture: amd64 Maintainer: Stig Sandbeck Mathisen Installed-Size: 280 Depends: libc6 (>= 2.7-1) Filename: amd64/libjemalloc1_3.6.0-8vnz1_amd64.deb Size: 103014 MD5sum: fce041afcdfb853347956f87aa62d019 SHA1: 0804ebd4fe0f6c8e5425bd8c7a6d4e055f0fd7aa SHA256: f287b20e0e5fbc332c9172649a48a9cb6773cee32e9d729033dad4eb12c5dc1b Section: libs Priority: extra Homepage: http://www.canonware.com/jemalloc/ Description: general-purpose scalable concurrent malloc(3) implementation A library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. . Notable features are reduced lock contention, predictable low fragmentation, and introspection with heap profiling. Package: libjemalloc1 Source: jemalloc Version: 3.6.0-8vnz1 Architecture: i386 Maintainer: Stig Sandbeck Mathisen Installed-Size: 260 Depends: libc6 (>= 2.7-1) Filename: i386/libjemalloc1_3.6.0-8vnz1_i386.deb Size: 94028 MD5sum: 50a314cde1ee51b61004b71055b72792 SHA1: bf0f201b42f4a6dc6fac79f476ad57a1591798d1 SHA256: 7621327e07d727499d5a3408b80d17fe973da1c5b01029abbb64bebe0b89ebb9 Section: libs Priority: extra Homepage: http://www.canonware.com/jemalloc/ Description: general-purpose scalable concurrent malloc(3) implementation A library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. . Notable features are reduced lock contention, predictable low fragmentation, and introspection with heap profiling. Package: libjemalloc1-dbg Source: jemalloc Version: 3.6.0-8vnz1 Architecture: amd64 Maintainer: Stig Sandbeck Mathisen Installed-Size: 944 Depends: libjemalloc1 (= 3.6.0-8vnz1) Filename: amd64/libjemalloc1-dbg_3.6.0-8vnz1_amd64.deb Size: 262612 MD5sum: cb7f0811355ad764ebcec97dfafb72b2 SHA1: 6d6ddfc03a04eea2a6259ee0348ff277a395e96f SHA256: e47cc69f34903161d22ef067cd4045c65e03fb154517728e11c3f351587dcf15 Section: debug Priority: extra Homepage: http://www.canonware.com/jemalloc/ Description: debug symbols for jemalloc Debug symbols for the jemalloc library. This may be used for debugging and profiling. . Jemalloc is a library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. Package: libjemalloc1-dbg Source: jemalloc Version: 3.6.0-8vnz1 Architecture: i386 Maintainer: Stig Sandbeck Mathisen Installed-Size: 716 Depends: libjemalloc1 (= 3.6.0-8vnz1) Filename: i386/libjemalloc1-dbg_3.6.0-8vnz1_i386.deb Size: 252290 MD5sum: d5a6193d5ebc2cb1fda2bb71e3343c37 SHA1: 8bf763ab9d7515ed0955cf183a7750cd59f6c19a SHA256: 5377d38867193aa5dee22d473dca5ed3752d6ddf2c5779adee29934dc804270c Section: debug Priority: extra Homepage: http://www.canonware.com/jemalloc/ Description: debug symbols for jemalloc Debug symbols for the jemalloc library. This may be used for debugging and profiling. . Jemalloc is a library providing a malloc(3) implementation for multi-threaded processes on multi-processor systems. Package: libltdl-dev Source: libtool Version: 2.2.6b-3 Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 964 Depends: libltdl7 (= 2.2.6b-3) Recommends: libtool Suggests: libtool-doc Conflicts: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20), libtool1.4 Replaces: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20) Provides: libltdl3-dev, libltdl7-dev Filename: amd64/libltdl-dev_2.2.6b-3_amd64.deb Size: 1119352 MD5sum: 59b42317c14ff0066b357320f8aaeb90 SHA1: 2029501e34511402c63477b5cb0c9985b706c7ce SHA256: e390f1ebd75305ece6e0b16db90fc05405aa6d2ffe144855092a34763e9781e1 Section: libdevel Priority: optional Homepage: http://www.gnu.org/software/libtool/ Description: A system independent dlopen wrapper for GNU libtool This package contains the header files and static libraries for the libltdl package. . A small library that aims at hiding the various difficulties of dlopening libraries from programmers. It is a system independent dlopen wrapper for GNU libtool. . It supports the following dlopen interfaces: * dlopen (Solaris, Linux and various BSD flavors) * shl_load (HP-UX) * LoadLibrary (Win16 and Win32) * load_add_on (BeOS) * GNU DLD (emulates dynamic linking for static libraries) * libtool's dlpreopen Original-Maintainer: Kurt Roeckx Package: libltdl-dev Source: libtool Version: 2.2.6b-3 Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 940 Depends: libltdl7 (= 2.2.6b-3) Recommends: libtool Suggests: libtool-doc Conflicts: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20), libtool1.4 Replaces: libltdl3-dev, libltdl7-dev, libtool (<< 1.5.20) Provides: libltdl3-dev, libltdl7-dev Filename: i386/libltdl-dev_2.2.6b-3_i386.deb Size: 1108628 MD5sum: aa50bd233e88cd03e3bee674a0bdbc30 SHA1: 60ed80c83ee86360bfa9380f9ec4d039de6009cc SHA256: 5f3150ebfe7d986d7db44373391b5348f87cd20b6b9ea6271b259b3438cb7b88 Section: libdevel Priority: optional Homepage: http://www.gnu.org/software/libtool/ Description: A system independent dlopen wrapper for GNU libtool This package contains the header files and static libraries for the libltdl package. . A small library that aims at hiding the various difficulties of dlopening libraries from programmers. It is a system independent dlopen wrapper for GNU libtool. . It supports the following dlopen interfaces: * dlopen (Solaris, Linux and various BSD flavors) * shl_load (HP-UX) * LoadLibrary (Win16 and Win32) * load_add_on (BeOS) * GNU DLD (emulates dynamic linking for static libraries) * libtool's dlpreopen Original-Maintainer: Kurt Roeckx Package: libltdl7 Source: libtool Version: 2.2.6b-3 Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 380 Depends: libc6 (>= 2.7-1) Filename: amd64/libltdl7_2.2.6b-3_amd64.deb Size: 1738876 MD5sum: 13e3c707887483e6c30949cd753a4aeb SHA1: 26b45f238cbee04e3c33a573b39bf4549bf516c5 SHA256: 9aed9e70311cc518e0dfe17b7cb52ac678401454cddf841846caf235aa1da48c Section: libs Priority: optional Homepage: http://www.gnu.org/software/libtool/ Description: A system independent dlopen wrapper for GNU libtool This package contains the run-time libltdl library. . A small library that aims at hiding the various difficulties of dlopening libraries from programmers. It is a system independent dlopen wrapper for GNU libtool. . It supports the following dlopen interfaces: * dlopen (Solaris, Linux and various BSD flavors) * shl_load (HP-UX) * LoadLibrary (Win16 and Win32) * load_add_on (BeOS) * GNU DLD (emulates dynamic linking for static libraries) * libtool's dlpreopen Original-Maintainer: Kurt Roeckx Package: libltdl7 Source: libtool Version: 2.2.6b-3 Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 376 Depends: libc6 (>= 2.7-1) Filename: i386/libltdl7_2.2.6b-3_i386.deb Size: 1716896 MD5sum: 86c6f47d1807a6890827f84447b394ad SHA1: 2f6cb5b5e6e807573102231ff4c3fde96107bc04 SHA256: 0493ad8654f0e5cd2e1e78a6217951dcfc44ef4ce90ddcbd8e3a97e336bf5524 Section: libs Priority: optional Homepage: http://www.gnu.org/software/libtool/ Description: A system independent dlopen wrapper for GNU libtool This package contains the run-time libltdl library. . A small library that aims at hiding the various difficulties of dlopening libraries from programmers. It is a system independent dlopen wrapper for GNU libtool. . It supports the following dlopen interfaces: * dlopen (Solaris, Linux and various BSD flavors) * shl_load (HP-UX) * LoadLibrary (Win16 and Win32) * load_add_on (BeOS) * GNU DLD (emulates dynamic linking for static libraries) * libtool's dlpreopen Original-Maintainer: Kurt Roeckx Package: liblzma-dev Source: xz-utils Version: 5.0.0-2.1 Architecture: amd64 Maintainer: Jonathan Nieder Installed-Size: 516 Depends: liblzma2 (= 5.0.0-2.1) Suggests: liblzma-doc Filename: amd64/liblzma-dev_5.0.0-2.1_amd64.deb Size: 195082 MD5sum: e616066f0a9492ceae748fc0c1dc440f SHA1: 89295e772d85ca354963e160c43da9113fd64533 SHA256: a864bb78fffd6cda88ecc44f8a7846c2beb0b157991456cabceb2941048714a3 Section: libdevel Priority: optional Homepage: http://tukaani.org/xz/ Description: XZ-format compression library - development files XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) This package provides the development library needed to build programs using liblzma. Package: liblzma-dev Source: xz-utils Version: 5.0.0-2.1 Architecture: i386 Maintainer: Jonathan Nieder Installed-Size: 480 Depends: liblzma2 (= 5.0.0-2.1) Suggests: liblzma-doc Filename: i386/liblzma-dev_5.0.0-2.1_i386.deb Size: 195024 MD5sum: 36df323f214d035a561cbeb1b70585c4 SHA1: 2c01976e1d6ee09d915475929987e374eb5d2a15 SHA256: 001315fa545be138d3935965f0d9db6366b7c05f11ffb139ce4b07fc22718633 Section: libdevel Priority: optional Homepage: http://tukaani.org/xz/ Description: XZ-format compression library - development files XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) This package provides the development library needed to build programs using liblzma. Package: liblzma-doc Source: xz-utils Version: 5.0.0-2.1 Architecture: all Maintainer: Jonathan Nieder Installed-Size: 2880 Suggests: liblzma-dev Filename: all/liblzma-doc_5.0.0-2.1_all.deb Size: 430942 MD5sum: 87a1fdc395dada0762c097681de80d5d SHA1: bdda211f2811d4ff02baff158407bae6415c001e SHA256: ae80a9a14145b78bc8653dae52aa21006040811830cd634677f7345a4239994b Section: doc Priority: optional Homepage: http://tukaani.org/xz/ Description: XZ-format compression library - API documentation This package contains a reference manual for the liblzma data compression library, in Doxygen-generated HTML files. The purpose of each struct, macro, and function in the public interface is explained. Package: liblzma2 Source: xz-utils Version: 5.0.0-2.1 Architecture: amd64 Maintainer: Jonathan Nieder Installed-Size: 320 Depends: libc6 (>= 2.7-1) Filename: amd64/liblzma2_5.0.0-2.1_amd64.deb Size: 181040 MD5sum: 98f182959f5be81c5a4f1aec9cf2ebb4 SHA1: c681e5463f6609be30e1601f87dd952124b9500d SHA256: c820da0e95e662db9a3e264e1ed00e9a9ab3e9be0536bc732ebdc310c0ce94de Section: libs Priority: required Homepage: http://tukaani.org/xz/ Description: XZ-format compression library XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) Package: liblzma2 Source: xz-utils Version: 5.0.0-2.1 Architecture: i386 Maintainer: Jonathan Nieder Installed-Size: 316 Depends: libc6 (>= 2.7-1) Filename: i386/liblzma2_5.0.0-2.1_i386.deb Size: 183232 MD5sum: 1d520193004a9b690b91717f80df8720 SHA1: 30b7bf951d6f41c1fd10b063ea13fdbe522ccfe7 SHA256: 99bf0766f7839e6d979d773676f56fbb2052308386e6da57ba4deb8bb2578103 Section: libs Priority: required Homepage: http://tukaani.org/xz/ Description: XZ-format compression library XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) Package: libpcre3 Source: pcre3 Version: 8.12-5 Architecture: amd64 Maintainer: Ubuntu Developers Installed-Size: 500 Depends: libc6 (>= 2.7-1), libreadline5 (>= 5.2) Conflicts: libpcre3-dev (<= 4.3-3) Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~) Filename: amd64/libpcre3_8.12-5_amd64.deb Size: 1156514 MD5sum: bc26490a6c0fed16b6f41bdbaa8135f4 SHA1: 49cd7a697bfaf202c826a9ee7a9802f9d751ecb7 SHA256: baff2902a51585339855948265da2b5061ba1b8ad84dd61da27034b4cc88d60c Section: libs Priority: important Description: Perl 5 Compatible Regular Expression Library - runtime files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the runtime libraries. Original-Maintainer: Mark Baker Package: libpcre3 Source: pcre3 Version: 8.12-5 Architecture: i386 Maintainer: Ubuntu Developers Installed-Size: 492 Depends: libc6 (>= 2.7-1), libreadline5 (>= 5.2) Conflicts: libpcre3-dev (<= 4.3-3) Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~) Filename: i386/libpcre3_8.12-5_i386.deb Size: 1143790 MD5sum: e3f7d17dbc9fe05417b10b7e6cf11263 SHA1: 450688f8920a3d253b84147ad22a7983870f8d20 SHA256: c06b1f9e215d1e6002b18a54cc2552fb0ed86d83a1b172486a74bc8611139b3c Section: libs Priority: important Description: Perl 5 Compatible Regular Expression Library - runtime files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the runtime libraries. Original-Maintainer: Mark Baker Package: libpcre3-dbg Source: pcre3 Version: 8.12-5 Architecture: amd64 Maintainer: Ubuntu Developers Installed-Size: 1064 Depends: libpcre3 (= 8.12-5), libpcrecpp0 (= 8.12-5) Filename: amd64/libpcre3-dbg_8.12-5_amd64.deb Size: 2301326 MD5sum: 86cac6e8c06c9c36050228d8b86518a7 SHA1: 1d84063ffdd9b2254b5166c109c9ff2753110ce1 SHA256: d58f3fb455e1415a31d19b53a7c0407e6fd6994ceb94dbf3311b3672b634bcd7 Section: debug Priority: extra Description: Perl 5 Compatible Regular Expression Library - debug symbols This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the debug symbols Original-Maintainer: Mark Baker Package: libpcre3-dbg Source: pcre3 Version: 8.12-5 Architecture: i386 Maintainer: Ubuntu Developers Installed-Size: 740 Depends: libpcre3 (= 8.12-5), libpcrecpp0 (= 8.12-5) Filename: i386/libpcre3-dbg_8.12-5_i386.deb Size: 2063472 MD5sum: 2ff6f91e8aaa05be9479b2b43b9280b8 SHA1: 7b57b9fa378fce371a54ee7d638c33acc023d329 SHA256: 978d9ef3f4906ab202cdfd45d20b354e3d75085353a5c7f98f31e4a0b80649db Section: debug Priority: extra Description: Perl 5 Compatible Regular Expression Library - debug symbols This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the debug symbols Original-Maintainer: Mark Baker Package: libpcre3-dev Source: pcre3 Version: 8.12-5 Architecture: amd64 Maintainer: Ubuntu Developers Installed-Size: 760 Depends: libc6-dev, libpcre3 (= 8.12-5), libpcrecpp0 (= 8.12-5) Conflicts: libpcre1-dev, libpcre2-dev Filename: amd64/libpcre3-dev_8.12-5_amd64.deb Size: 1487028 MD5sum: e7013cbc59bbceb38b39ad6d2c4fe9cc SHA1: 807546e1377d7e0ab5c79eb32c53f7eb7add4337 SHA256: 3249c53563011d29f5820f04f8b2654e50fd8fbff60acd2621cc41561a17c584 Section: libdevel Priority: optional Description: Perl 5 Compatible Regular Expression Library - development files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the development files, including headers, static libraries, and documentation. Original-Maintainer: Mark Baker Package: libpcre3-dev Source: pcre3 Version: 8.12-5 Architecture: i386 Maintainer: Ubuntu Developers Installed-Size: 696 Depends: libc6-dev, libpcre3 (= 8.12-5), libpcrecpp0 (= 8.12-5) Conflicts: libpcre1-dev, libpcre2-dev Filename: i386/libpcre3-dev_8.12-5_i386.deb Size: 1460208 MD5sum: b1c0a3fd555a34d1f78b9f554ba0acd6 SHA1: 4c03dff46f75154279abf5cd63e273237f0b8fe8 SHA256: 4f3421b36556cbd42d5df41467d3bd4571331648f4217895391cd158f0aa917e Section: libdevel Priority: optional Description: Perl 5 Compatible Regular Expression Library - development files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the development files, including headers, static libraries, and documentation. Original-Maintainer: Mark Baker Package: libpcrecpp0 Source: pcre3 Version: 8.12-5 Architecture: amd64 Maintainer: Ubuntu Developers Installed-Size: 188 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libpcre3 (= 8.12-5), libstdc++6 (>= 4.2.1) Conflicts: libpcre3 (<< 6.4-1.1) Replaces: libpcre3 (<< 6.4-1.1) Filename: amd64/libpcrecpp0_8.12-5_amd64.deb Size: 647476 MD5sum: df848a283e24c3cf89e41c8b360a2079 SHA1: 47251539331e43af39a51012fa4389abc0cb341d SHA256: 003c1e1dee831979b4e08c3f8f4ccee53d9ed37deb7b4209f7b98850b66f0826 Section: libs Priority: optional Description: Perl 5 Compatible Regular Expression Library - C++ runtime files This is a C++ library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the C++ runtime library. Original-Maintainer: Mark Baker Package: libpcrecpp0 Source: pcre3 Version: 8.12-5 Architecture: i386 Maintainer: Ubuntu Developers Installed-Size: 184 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libpcre3 (= 8.12-5), libstdc++6 (>= 4.2.1) Conflicts: libpcre3 (<< 6.4-1.1) Replaces: libpcre3 (<< 6.4-1.1) Filename: i386/libpcrecpp0_8.12-5_i386.deb Size: 645070 MD5sum: dd1e258fa7175fd7e611cdf752ec2365 SHA1: eda3c070a9575eae3fc46f6294a002c439bdfa4e SHA256: 64fd26699999c48cdbdef2b992e124ca8cc920ddc6dea93aebf886d5655febdb Section: libs Priority: optional Description: Perl 5 Compatible Regular Expression Library - C++ runtime files This is a C++ library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the C++ runtime library. Original-Maintainer: Mark Baker Package: libpython2.4 Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 2000 Depends: python2.4 (= 2.4.6-1), libc6 (>= 2.7-1) Filename: amd64/libpython2.4_2.4.6-1_amd64.deb Size: 786078 MD5sum: 359c521de0a656393de7aae0dc74b209 SHA1: 3be8fc5437af5b18d9465822ab0760442d29e965 SHA256: ed1938f885b13c7a1afb9a27d10532b36fd43371a0d822dcc6278deb28ccd849 Section: libs Priority: optional Homepage: http://python.org/ Description: Shared Python runtime library (version 2.4) Version 2.4 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Original-Maintainer: Matthias Klose Package: libpython2.4 Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 1776 Depends: python2.4 (= 2.4.6-1), libc6 (>= 2.7-1) Filename: i386/libpython2.4_2.4.6-1_i386.deb Size: 722388 MD5sum: a8dff1a99212bc8823c01b7aeb73f88f SHA1: 8cae710d800db6bb07e07c9a9d216dbe17b7848a SHA256: 9ec5fe664cda2333dea92d2613c0638a6168ab65d93d44aabbf78193228c6e8c Section: libs Priority: optional Homepage: http://python.org/ Description: Shared Python runtime library (version 2.4) Version 2.4 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Original-Maintainer: Matthias Klose Package: libpython3.2 Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 2916 Depends: python3.2 (= 3.2.4-1), libc6 (>= 2.7-1), libexpat1 (>= 1.95.8), libffi5 (>= 3.0.4), libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.2.0) Suggests: idle-python3.2 (= 3.2.4-1) Filename: amd64/libpython3.2_3.2.4-1_amd64.deb Size: 1105206 MD5sum: bc25c02531a522e563953147e038a19f SHA1: 577c1aaf688d054063484dc659fa500d45ef83da SHA256: b424a013c6dd2d4f7c911059f6b2dfb65ba13ad6476cd7e8a4e76e76df774c0f Section: libs Priority: optional Homepage: http://python.org/ Description: Shared Python runtime library (version 3.2) Version 3.2 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Original-Maintainer: Matthias Klose Package: libpython3.2 Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 2504 Depends: python3.2 (= 3.2.4-1), libc6 (>= 2.7-1), libexpat1 (>= 1.95.8), libffi5 (>= 3.0.4), libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.2.0) Suggests: idle-python3.2 (= 3.2.4-1) Filename: i386/libpython3.2_3.2.4-1_i386.deb Size: 1004478 MD5sum: edea90b5cb43d376d99e3562ca728189 SHA1: b583b0bc15e766a976b3b9cfda0958b15c18981f SHA256: 5438e703fa747ca0f4533164c7e89603cc0ba166ee857115a00947e9f75edea8 Section: libs Priority: optional Homepage: http://python.org/ Description: Shared Python runtime library (version 3.2) Version 3.2 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Original-Maintainer: Matthias Klose Package: libsqlite3-0 Source: sqlite3 Version: 3.7.13-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 836 Depends: libc6 (>= 2.7-1) Filename: amd64/libsqlite3-0_3.7.13-1_amd64.deb Size: 1971866 MD5sum: 0f354f6fee7516990527b2431b51ee41 SHA1: e5c0b9469d2da2add22399443187708e576953fc SHA256: 9d83aa3f63c73cf64ab532b69f12ef3ce451abc3f4cd92bb92ac31cfe6af6455 Section: libs Priority: standard Homepage: http://www.sqlite.org/ Description: SQLite 3 shared library SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Package: libsqlite3-0 Source: sqlite3 Version: 3.7.13-1 Architecture: i386 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 784 Depends: libc6 (>= 2.7-1) Filename: i386/libsqlite3-0_3.7.13-1_i386.deb Size: 1935306 MD5sum: b5cf1fce2c9c695a2588155456d3b32f SHA1: 23eb0781f6c4d9195ee25dcfe5cac2cdff4c2f58 SHA256: be49da2d3d51ebf196b129823cac8a4bc9ce38e03e3fca12b2b66a4e59f89ae7 Section: libs Priority: standard Homepage: http://www.sqlite.org/ Description: SQLite 3 shared library SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Package: libsqlite3-0-dbg Source: sqlite3 Version: 3.7.13-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 2408 Depends: libsqlite3-0 (= 3.7.13-1) Filename: amd64/libsqlite3-0-dbg_3.7.13-1_amd64.deb Size: 5742986 MD5sum: f28c8b44be0e0c5d031ba91d6ff09560 SHA1: fdcd5b7fb32fb61fd2d8c7442e38a83cfd5d35b8 SHA256: df315781e45861b95f4ba568371d0ff4edfd57e8dbaacf7809366f9bb33f149a Section: debug Priority: extra Homepage: http://www.sqlite.org/ Description: SQLite 3 debugging symbols SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the debugging symbols for the libraries. Package: libsqlite3-0-dbg Source: sqlite3 Version: 3.7.13-1 Architecture: i386 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 1620 Depends: libsqlite3-0 (= 3.7.13-1) Filename: i386/libsqlite3-0-dbg_3.7.13-1_i386.deb Size: 5216962 MD5sum: fbf498f2571b931febffd7fd454650bc SHA1: 56484f18f8e7cad86dd8d134df9e74d592477527 SHA256: e5c0e2c844d2602ef2e865d102d7592d50536288ccfd5739735be5706ac8ff08 Section: debug Priority: extra Homepage: http://www.sqlite.org/ Description: SQLite 3 debugging symbols SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the debugging symbols for the libraries. Package: libsqlite3-dev Source: sqlite3 Version: 3.7.13-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 1404 Depends: libsqlite3-0 (= 3.7.13-1), libc6-dev Suggests: sqlite3-doc Filename: amd64/libsqlite3-dev_3.7.13-1_amd64.deb Size: 2443102 MD5sum: 498bfd6653e652554137e0d9aed200b6 SHA1: d33a259523f8abf2566594b5d15393592854b7a2 SHA256: ec8181704185e40879bb386628797a3249790fe158141ea1b932770cca709153 Section: libdevel Priority: optional Homepage: http://www.sqlite.org/ Description: SQLite 3 development files SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the development files (headers, static libraries) Package: libsqlite3-dev Source: sqlite3 Version: 3.7.13-1 Architecture: i386 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 1192 Depends: libsqlite3-0 (= 3.7.13-1), libc6-dev Suggests: sqlite3-doc Filename: i386/libsqlite3-dev_3.7.13-1_i386.deb Size: 2358566 MD5sum: c0d1d1639661239f2da1d3748e94c36f SHA1: 808d81e864c9cd0712bf15f0dbd570d63119c6b0 SHA256: 3ed81288134318bbb22321545b638da24341d4bc430db44b42b3dfbc07461cb8 Section: libdevel Priority: optional Homepage: http://www.sqlite.org/ Description: SQLite 3 development files SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the development files (headers, static libraries) Package: libsqlite3-tcl Source: sqlite3 Version: 3.7.13-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 184 Depends: libc6 (>= 2.7-1), libsqlite3-0 Suggests: sqlite3-doc Filename: amd64/libsqlite3-tcl_3.7.13-1_amd64.deb Size: 667444 MD5sum: edcf152f4f326b25456b84f5583d77cb SHA1: f5e0a4dba9db143911b04cade930eb64ab146d3a SHA256: ab04cefe3cd306c557fffe8afa98d93fc11b682c59ec2e5a70738e4fa55c6611 Section: interpreters Priority: optional Homepage: http://www.sqlite.org/ Description: SQLite 3 Tcl bindings SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the Tcl bindings. Package: libsqlite3-tcl Source: sqlite3 Version: 3.7.13-1 Architecture: i386 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 180 Depends: libc6 (>= 2.7-1), libsqlite3-0 Suggests: sqlite3-doc Filename: i386/libsqlite3-tcl_3.7.13-1_i386.deb Size: 656124 MD5sum: b0a8fb18535d4c075c5f83a13151347e SHA1: d21dcdfa2fa3bab3c6c613f32eea17e51f03c1f4 SHA256: e5a7924be25affad2fbc54b9627578cad9f6372e2b7f33bd1aa5183861188a83 Section: interpreters Priority: optional Homepage: http://www.sqlite.org/ Description: SQLite 3 Tcl bindings SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the Tcl bindings. Package: libssh2-1 Source: libssh2 Version: 1.4.2-2 Architecture: amd64 Maintainer: Mikhail Gusarov Installed-Size: 272 Depends: libc6 (>= 2.7-1), libgcrypt11 (>= 1.4.0), zlib1g (>= 1:1.1.4) Filename: amd64/libssh2-1_1.4.2-2_amd64.deb Size: 129944 MD5sum: 570a0a0ad902f64b15dac4f526973e36 SHA1: 6b8a4a236f1a532455d271a7631e53f0fadaaa21 SHA256: eb168c432756b1ab3be94b54f1db1a87f012ce40e7b16c8ce5074cea7a801288 Section: libs Priority: optional Homepage: http://libssh2.org/ Description: SSH2 client-side library libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP sessions; port forwarding; password, key-based and keyboard-interactive authentication. . This package contains the runtime library. Package: libssh2-1 Source: libssh2 Version: 1.4.2-2 Architecture: i386 Maintainer: Mikhail Gusarov Installed-Size: 260 Depends: libc6 (>= 2.7-1), libgcrypt11 (>= 1.4.0), zlib1g (>= 1:1.1.4) Filename: i386/libssh2-1_1.4.2-2_i386.deb Size: 126514 MD5sum: a7d7478f6c5cd63ff2c9e9496bd819f1 SHA1: c19cf86be930db0008e1fbb4c330bf6a89b88609 SHA256: 49606978b5e1a3a490c2b5dde6e9f9ffd51f09d5e732474e7a350dc29bb8ea17 Section: libs Priority: optional Homepage: http://libssh2.org/ Description: SSH2 client-side library libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP sessions; port forwarding; password, key-based and keyboard-interactive authentication. . This package contains the runtime library. Package: libssh2-1-dbg Source: libssh2 Version: 1.4.2-2 Architecture: amd64 Maintainer: Mikhail Gusarov Installed-Size: 624 Depends: libssh2-1 (= 1.4.2-2), libssh2-1-dev (= 1.4.2-2) Filename: amd64/libssh2-1-dbg_1.4.2-2_amd64.deb Size: 209704 MD5sum: 0781fd4fa190762aec7e28d2fd567762 SHA1: 4d163ee3c433e505a57896182d35d81c577595b5 SHA256: dd21fa88c98b1d66dfbe19ca12eb8871ae55bdc3db3f948b8df7a3badc52a59d Section: debug Priority: extra Homepage: http://libssh2.org/ Description: SSH2 client-side library (debug package) libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP sessions; port forwarding; password, key-based and keyboard-interactive authentication. . This package contains the debugging symbols. Package: libssh2-1-dbg Source: libssh2 Version: 1.4.2-2 Architecture: i386 Maintainer: Mikhail Gusarov Installed-Size: 524 Depends: libssh2-1 (= 1.4.2-2), libssh2-1-dev (= 1.4.2-2) Filename: i386/libssh2-1-dbg_1.4.2-2_i386.deb Size: 201072 MD5sum: 0e26369d4ef2d91f9fcf5d8fdc64a409 SHA1: 395c1f395f384bcf45a99d09c8740b689531bcf9 SHA256: eca90ca6728c6824b5c1de6ae0d86dddb08913681f0367e5cbf1f97b13379de2 Section: debug Priority: extra Homepage: http://libssh2.org/ Description: SSH2 client-side library (debug package) libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP sessions; port forwarding; password, key-based and keyboard-interactive authentication. . This package contains the debugging symbols. Package: libssh2-1-dev Source: libssh2 Version: 1.4.2-2 Architecture: amd64 Maintainer: Mikhail Gusarov Installed-Size: 1216 Depends: libssh2-1 (= 1.4.2-2), libgcrypt11-dev Filename: amd64/libssh2-1-dev_1.4.2-2_amd64.deb Size: 308820 MD5sum: 12743a6753386a980fdb5454426e6f19 SHA1: 7b083cd33ebfcd1413ca6559549212c618fa7846 SHA256: a6996bf363626be06f3f53bce53f51c139cdfb5754237645cd1935a18a5a30b5 Section: libdevel Priority: optional Homepage: http://libssh2.org/ Description: SSH2 client-side library (development headers) libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP sessions; port forwarding; password, key-based and keyboard-interactive authentication. . This package contains the development files. Package: libssh2-1-dev Source: libssh2 Version: 1.4.2-2 Architecture: i386 Maintainer: Mikhail Gusarov Installed-Size: 1148 Depends: libssh2-1 (= 1.4.2-2), libgcrypt11-dev Filename: i386/libssh2-1-dev_1.4.2-2_i386.deb Size: 298750 MD5sum: e7cfc80585ad842d19d36e453b542e3e SHA1: 515b1a9423e5be6bb1192d8a767872db37e7a1ff SHA256: 2757f70f781843d2c70341200f4bf31d0dade5c9434302a4f426bfb4e89d7b6d Section: libdevel Priority: optional Homepage: http://libssh2.org/ Description: SSH2 client-side library (development headers) libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP sessions; port forwarding; password, key-based and keyboard-interactive authentication. . This package contains the development files. Package: libtool Version: 2.2.6b-3 Architecture: amd64 Maintainer: PICCORO Lenz McKAY Installed-Size: 1340 Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev Recommends: libltdl-dev Suggests: libtool-doc, autoconf (>> 2.50), automaken, gfortran | fortran95-compiler, gcj Conflicts: autoconf (<= 2.12), automake (<= 1.3), libtool1.4 Filename: amd64/libtool_2.2.6b-3_amd64.deb Size: 2904946 MD5sum: 9c41e58a3671a8f9ca4298579d3c7d85 SHA1: 24607eb3b5f988c00b6924d62aa5e9ee49d8ff5f SHA256: 2ec6b1136e914aa56a37a7200da7a6c90b0b1972a5c62339b894c3250f11052d Section: devel Priority: optional Homepage: http://www.gnu.org/software/libtool/ Description: Generic library support script This is GNU libtool, a generic library support script. Libtool hides the complexity of generating special library types (such as shared libraries) behind a consistent interface. To use libtool, add the new generic library building commands to your Makefile, Makefile.in, or Makefile.am. See the documentation for details. Libtool supports building static libraries on all platforms. . Libtool supports generation of C, C++, Fortran and Java libraries. Original-Maintainer: Kurt Roeckx Package: libtool Version: 2.2.6b-3 Architecture: i386 Maintainer: PICCORO Lenz McKAY Installed-Size: 1340 Depends: gcc | c-compiler, cpp, libc6-dev | libc-dev, file, autotools-dev Recommends: libltdl-dev Suggests: libtool-doc, autoconf (>> 2.50), automaken, gfortran | fortran95-compiler, gcj Conflicts: autoconf (<= 2.12), automake (<= 1.3), libtool1.4 Filename: i386/libtool_2.2.6b-3_i386.deb Size: 2908870 MD5sum: 6ab5e8f21c6ae6defa5d843369333d1b SHA1: 2fbd35c46272fcae9b649eee94beaf9ffbedb54f SHA256: 20c708a4c99b66c481bdbc6d6a625e45c7f72c4bd0d0161c373ac85f7f5a16d7 Section: devel Priority: optional Homepage: http://www.gnu.org/software/libtool/ Description: Generic library support script This is GNU libtool, a generic library support script. Libtool hides the complexity of generating special library types (such as shared libraries) behind a consistent interface. To use libtool, add the new generic library building commands to your Makefile, Makefile.in, or Makefile.am. See the documentation for details. Libtool supports building static libraries on all platforms. . Libtool supports generation of C, C++, Fortran and Java libraries. Original-Maintainer: Kurt Roeckx Package: libtool-doc Source: libtool Version: 2.2.6b-3 Architecture: all Maintainer: PICCORO Lenz McKAY Installed-Size: 1044 Depends: dpkg (>= 1.15.4) | install-info Conflicts: libtool1.4-doc Filename: all/libtool-doc_2.2.6b-3_all.deb Size: 3000592 MD5sum: 6ca0cda07af3d753e18c4d60621ccc3b SHA1: f68177c1807e5eeb8a608c0ac008ba7d15903e70 SHA256: 9e41ea526a4d92fa3124ec60b12ae7829d63e955bb7dff88817ea442fba4bfba Section: doc Priority: optional Homepage: http://www.gnu.org/software/libtool/ Description: Generic library support script This package contains the GNU libtool documentation. . GNU libtool is generic library support script. Libtool hides the complexity of generating special library types (such as shared libraries) behind a consistent interface. To use libtool, add the new generic library building commands to your Makefile, Makefile.in, or Makefile.am. See the documentation for details. Libtool supports building static libraries on all platforms. Original-Maintainer: Kurt Roeckx Package: libxklavier-dev Source: libxklavier Version: 5.0-2 Architecture: amd64 Maintainer: Debian GNOME Maintainers Installed-Size: 568 Depends: libxklavier16 (= 5.0-2), libglib2.0-dev (>= 2.16.0), libxml2-dev (>= 2.0.0), libx11-dev Conflicts: libxklavier11-dev, libxklavier12-dev Replaces: libxklavier11-dev, libxklavier12-dev Filename: amd64/libxklavier-dev_5.0-2_amd64.deb Size: 97028 MD5sum: 6d2fe666fa9e23f6307012e62a3abcdc SHA1: 14403f5d6834d04eb8661eb3a871b2c996314608 SHA256: 95df11cb5a82f8827dc5c687de69551e1fcd9111d6fa40e0c03f90230a615076 Section: libdevel Priority: optional Homepage: http://www.freedesktop.org/wiki/Software/LibXklavier Description: Development files for libxklavier These are headers and other files needed to develop with libxklavier. Package: libxklavier-dev Source: libxklavier Version: 5.0-2 Architecture: i386 Maintainer: Debian GNOME Maintainers Installed-Size: 512 Depends: libxklavier16 (= 5.0-2), libglib2.0-dev (>= 2.16.0), libxml2-dev (>= 2.0.0), libx11-dev Conflicts: libxklavier11-dev, libxklavier12-dev Replaces: libxklavier11-dev, libxklavier12-dev Filename: i386/libxklavier-dev_5.0-2_i386.deb Size: 90034 MD5sum: 3d2b2ab7e642e11872231cd5dd1f301e SHA1: e01844ba0bf81c6f28de4e77dd369b49614d2c04 SHA256: 820198945f4868ad253b1320a744f6f32ede0ac5562c80170887b02e9794437e Section: libdevel Priority: optional Homepage: http://www.freedesktop.org/wiki/Software/LibXklavier Description: Development files for libxklavier These are headers and other files needed to develop with libxklavier. Package: libxklavier16 Source: libxklavier Version: 5.0-2 Architecture: amd64 Maintainer: Debian GNOME Maintainers Installed-Size: 196 Depends: libc6 (>= 2.7-1), libglib2.0-0 (>= 2.24.0), libx11-6, libxi6, libxkbfile1, libxml2 (>= 2.6.27), xkb-data (>= 0.8) | xkb-data-legacy, x11-xkb-utils Suggests: iso-codes Filename: amd64/libxklavier16_5.0-2_amd64.deb Size: 62392 MD5sum: 544cb2f77f7c9083d3305dcfe57da6d1 SHA1: 4ed884143fd452c84a8548005f5c1322e96925bf SHA256: 9615b7747ab3ea15688d746f00f09acfd1d3ad713da1a7bff5f70f8d8a578222 Section: libs Priority: optional Homepage: http://www.freedesktop.org/wiki/Software/LibXklavier Description: X Keyboard Extension high-level API Libxklavier provides programmers an API for high(er) level access to the X Keyboard Extension, to ease creating XKB related applications. Package: libxklavier16 Source: libxklavier Version: 5.0-2 Architecture: i386 Maintainer: Debian GNOME Maintainers Installed-Size: 180 Depends: libc6 (>= 2.7-1), libglib2.0-0 (>= 2.24.0), libx11-6, libxi6, libxkbfile1, libxml2 (>= 2.6.27), xkb-data (>= 0.8) | xkb-data-legacy, x11-xkb-utils Suggests: iso-codes Filename: i386/libxklavier16_5.0-2_i386.deb Size: 58030 MD5sum: 909eefee21f93882ef95cabb3558c1e6 SHA1: 747e84e011260664e7a18610d34699c4f7d0ecd3 SHA256: 735716846e87e3d939ec0c3d880aef8ce4fd29287cded3f380c5d19207469fd6 Section: libs Priority: optional Homepage: http://www.freedesktop.org/wiki/Software/LibXklavier Description: X Keyboard Extension high-level API Libxklavier provides programmers an API for high(er) level access to the X Keyboard Extension, to ease creating XKB related applications. Package: m4 Version: 1.4.14-3 Architecture: amd64 Maintainer: Santiago Vila Installed-Size: 676 Depends: libc6 (>= 2.7-1), dpkg (>= 1.15.4) | install-info Filename: amd64/m4_1.4.14-3_amd64.deb Size: 1435396 MD5sum: 7d21d96f6197f853d56121087d1355c9 SHA1: 185a92201a92372e1b9d84f9c6b5ed2e505b3c94 SHA256: 51f25edfb9a6029e18c3f10f700e99d941db874476f3540e4777bb36d4fbd73c Section: interpreters Priority: standard Homepage: http://www.gnu.org/software/m4/ Description: a macro processing language GNU `m4' is an implementation of the traditional UNIX macro processor. It is mostly SVR4 compatible, although it has some extensions (for example, handling more than 9 positional parameters to macros). `m4' also has builtin functions for including files, running shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for generating `configure' scripts, but not for running them. Package: m4 Version: 1.4.14-3 Architecture: i386 Maintainer: Santiago Vila Installed-Size: 640 Depends: libc6 (>= 2.7-1), dpkg (>= 1.15.4) | install-info Filename: i386/m4_1.4.14-3_i386.deb Size: 1379490 MD5sum: 6c009511fd6b3711682ab0e5e0126eb1 SHA1: 4e047ce5fb9c7166941a7daaa92471fbeb9b8df8 SHA256: 195becb3fbd37872b59da2f2e152655a5194031ec6bccdfd2ad124fa7cf12e81 Section: interpreters Priority: standard Homepage: http://www.gnu.org/software/m4/ Description: a macro processing language GNU `m4' is an implementation of the traditional UNIX macro processor. It is mostly SVR4 compatible, although it has some extensions (for example, handling more than 9 positional parameters to macros). `m4' also has builtin functions for including files, running shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for generating `configure' scripts, but not for running them. Package: m4-doc Source: m4 Version: 1.4.14-3 Architecture: all Maintainer: Santiago Vila Installed-Size: 880 Filename: all/m4-doc_1.4.14-3_all.deb Size: 1186240 MD5sum: 21e8cfccb175deb0edcf52b9c800180a SHA1: 5d26ab5adc9b4ec854ea4ca4c8cc47537c375da5 SHA256: 696c5a84353ee43831d69cfcd084b6bca15629e0252be9f74234c8758c9dfdd2 Section: doc Priority: optional Homepage: http://www.gnu.org/software/m4/ Description: Documentation for GNU m4 This package contains the HTML documentation for GNU m4. Package: man-db Version: 2.5.3-3 Architecture: amd64 Maintainer: Colin Watson Installed-Size: 2804 Depends: groff-base (>= 1.16.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, dpkg (>= 1.9.0), libc6 (>= 2.7-1), libgdbm3, zlib1g (>= 1:1.1.4) Suggests: groff, less, www-browser Conflicts: man, suidmanager (<< 0.50) Replaces: man, manpages-de (<< 0.5-4), nlsutils Provides: man, man-browser Filename: amd64/man-db_2.5.3-3_amd64.deb Size: 5737856 MD5sum: 640cedc574cf54be6f7d4a232411b53a SHA1: 83460b3e6a0b0ec72c097889bb002b7cb66c5a39 SHA256: df0bc2e57a1d7145d6af128149be493a548c9cfcc08c616acedbaf6fca126472 Section: doc Priority: important Homepage: http://man-db.nongnu.org/ Description: on-line manual pager This package provides the man command, the primary way of examining the on-line help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database, the manpath utility for determining the manual page search path, and the maintenance utilities mandb, catman and zsoelim. man-db uses the groff suite of programs to format and display the manual pages. Package: man-db Version: 2.5.3-3 Architecture: i386 Maintainer: Colin Watson Installed-Size: 2600 Depends: groff-base (>= 1.16.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, dpkg (>= 1.9.0), libc6 (>= 2.7-1), libgdbm3, zlib1g (>= 1:1.1.4) Suggests: groff, less, www-browser Conflicts: man, suidmanager (<< 0.50) Replaces: man, manpages-de (<< 0.5-4), nlsutils Provides: man, man-browser Filename: i386/man-db_2.5.3-3_i386.deb Size: 5315250 MD5sum: b022c370662e2b33d8270b108a84b720 SHA1: e3fd09bc8dae41ecdebe6a470a979757390c9b3b SHA256: 2e8bcca530417d14fd5bc6284802c8503e3ccb8ba4ef3df0394ae0bf6df49461 Section: doc Priority: important Homepage: http://man-db.nongnu.org/ Description: on-line manual pager This package provides the man command, the primary way of examining the on-line help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database, the manpath utility for determining the manual page search path, and the maintenance utilities mandb, catman and zsoelim. man-db uses the groff suite of programs to format and display the manual pages. Package: mc Version: 3:4.7.0.9-3 Architecture: amd64 Maintainer: Debian MC Packaging Group Installed-Size: 6588 Depends: e2fslibs (>= 1.41.0), libc6 (>= 2.7-1), libcomerr2 (>= 1.01), libglib2.0-0 (>= 2.24.0), libgpm2 (>= 1.20.4), libslang2 (>= 2.0.7-1) Recommends: file, perl, mime-support, zip, unzip, arj, bzip2, dbview, odt2txt, gv, catdvi | texlive-binaries, ps2text, poppler-utils, catdoc, netpbm, aview, links | w3m | lynx Suggests: lzip, unalz, cabextract, unrar, unace, arc, zoo, djvulibre-bin, epub-utils, genisoimage, imagemagick, libaspell-dev, python, python-boto, python-tz, mplayer, vorbis-tools, mpg123, xpmutils, xdg-utils, indent, tidy, astyle Filename: amd64/mc_4.7.0.9-3_amd64.deb Size: 2216664 MD5sum: 41a79aee01866292ddbf6cd30d7f01ab SHA1: 06f80345aa7524b6a40e9d05771dc5331a722bde SHA256: eefc06aff8b50896a285f7a5bf818978a3f7d3a519c8fbf02120c8759a5c8440 Section: utils Priority: optional Homepage: http://www.midnight-commander.org Description: Midnight Commander - a powerful file manager GNU Midnight Commander is a text-mode full-screen file manager. It uses a two panel interface and a subshell for command execution. It includes an internal editor with syntax highlighting and an internal viewer with support for binary files. Also included is Virtual Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH servers) and files inside archives to be manipulated like real files. Package: mc Version: 3:4.7.0.9-3 Architecture: i386 Maintainer: Debian MC Packaging Group Installed-Size: 6524 Depends: e2fslibs (>= 1.41.0), libc6 (>= 2.7-1), libcomerr2 (>= 1.01), libglib2.0-0 (>= 2.24.0), libgpm2 (>= 1.20.4), libslang2 (>= 2.0.7-1) Recommends: file, perl, mime-support, zip, unzip, arj, bzip2, dbview, odt2txt, gv, catdvi | texlive-binaries, ps2text, poppler-utils, catdoc, netpbm, aview, links | w3m | lynx Suggests: lzip, unalz, cabextract, unrar, unace, arc, zoo, djvulibre-bin, epub-utils, genisoimage, imagemagick, libaspell-dev, python, python-boto, python-tz, mplayer, vorbis-tools, mpg123, xpmutils, xdg-utils, indent, tidy, astyle Filename: i386/mc_4.7.0.9-3_i386.deb Size: 2186192 MD5sum: ee8413f6984a7480930227993eb0c158 SHA1: ba37de54d0da799d8eb23df0fd2605b855041057 SHA256: 872427f9a5434950bb6f4e96cc5cdb0af7ac49b3c793fab79f10fdff9c29ab61 Section: utils Priority: optional Homepage: http://www.midnight-commander.org Description: Midnight Commander - a powerful file manager GNU Midnight Commander is a text-mode full-screen file manager. It uses a two panel interface and a subshell for command execution. It includes an internal editor with syntax highlighting and an internal viewer with support for binary files. Also included is Virtual Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH servers) and files inside archives to be manipulated like real files. Package: mc-dbg Source: mc Version: 3:4.7.0.9-3 Architecture: amd64 Maintainer: Debian MC Packaging Group Installed-Size: 2104 Depends: mc (= 3:4.7.0.9-3) Suggests: gdb Filename: amd64/mc-dbg_4.7.0.9-3_amd64.deb Size: 730796 MD5sum: 401de6304b747334aa39f5bbf4359359 SHA1: 953729f2c9a6c85d5407bd8a0537437fdc3f984d SHA256: 740251f033d05ed33bb488577b947c9a58462f187489c789e1b851a2c8a1831b Section: debug Priority: extra Homepage: http://www.midnight-commander.org Description: Midnight Commander - a powerful file manager - debug package GNU Midnight Commander is a text-mode full-screen file manager. It uses a two panel interface and a subshell for command execution. It includes an internal editor with syntax highlighting and an internal viewer with support for binary files. Also included is Virtual Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH servers) and files inside archives to be manipulated like real files. . This package contains debugging information for mc. Package: mc-dbg Source: mc Version: 3:4.7.0.9-3 Architecture: i386 Maintainer: Debian MC Packaging Group Installed-Size: 1676 Depends: mc (= 3:4.7.0.9-3) Suggests: gdb Filename: i386/mc-dbg_4.7.0.9-3_i386.deb Size: 698308 MD5sum: 5038414a033a84d52a7dae62adbaf2d6 SHA1: e40c538b864c2932518fad4412e86d0e1e175751 SHA256: 4050002b608a5cb346090b30097bec9e01d5fda56127e2e91b3b2c91994c45f8 Section: debug Priority: extra Homepage: http://www.midnight-commander.org Description: Midnight Commander - a powerful file manager - debug package GNU Midnight Commander is a text-mode full-screen file manager. It uses a two panel interface and a subshell for command execution. It includes an internal editor with syntax highlighting and an internal viewer with support for binary files. Also included is Virtual Filesystem (VFS), that allows files on remote systems (e.g. FTP, SSH servers) and files inside archives to be manipulated like real files. . This package contains debugging information for mc. Package: ntfs-3g Version: 1:2012.1.15AR.8-2 Architecture: amd64 Maintainer: Daniel Baumann Installed-Size: 1524 Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.7-1), libfuse2 (>= 2.8.1), libgcrypt11 (>= 1.4.0), libgnutls26 (>= 2.9.11-0), libgpg-error0 (>= 1.4) Conflicts: libntfs-3g75, ntfsprogs (<< 1:2011.10.9AR.1-3~) Replaces: libntfs-3g75, ntfsprogs Filename: amd64/ntfs-3g_2012.1.15AR.8-2_amd64.deb Size: 592558 MD5sum: c8bf3d368e4e514193b4e91ff2f09ebf SHA1: 88b6bce0cdbf8ca6ee16045a0e625f625aa0c736 SHA256: 49e2b6042c20ed3e63f03f20a05fa5237ad2579cbbd01958b15cc342c3ff6f70 Section: otherosfs Priority: optional Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/ Description: read/write NTFS driver for FUSE NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. Package: ntfs-3g Version: 1:2012.1.15AR.8-2 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 1528 Depends: debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.7-1), libfuse2 (>= 2.8.1), libgcrypt11 (>= 1.4.0), libgnutls26 (>= 2.9.11-0), libgpg-error0 (>= 1.4) Conflicts: libntfs-3g75, ntfsprogs (<< 1:2011.10.9AR.1-3~) Replaces: libntfs-3g75, ntfsprogs Filename: i386/ntfs-3g_2012.1.15AR.8-2_i386.deb Size: 605392 MD5sum: 81fcfda8282c458f7514a16d852448dd SHA1: 5df78b350fa5876e5c6684647866401a65860a56 SHA256: 46567cbc9cf6cf422a9d0b6a85100d3561fc622527cc74d3e28fbce5318dca76 Section: otherosfs Priority: optional Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/ Description: read/write NTFS driver for FUSE NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. Package: ntfs-3g-dbg Source: ntfs-3g Version: 1:2012.1.15AR.8-2 Architecture: amd64 Maintainer: Daniel Baumann Installed-Size: 2888 Depends: ntfs-3g (= 1:2012.1.15AR.8-2), ntfs-3g-dev (= 1:2012.1.15AR.8-2) Filename: amd64/ntfs-3g-dbg_2012.1.15AR.8-2_amd64.deb Size: 1070214 MD5sum: 4cd18e34f45adbaf8fceb20ad01f431f SHA1: 7a36cf31fb3eae01ee7cbbf707070aa777707ec0 SHA256: c52aecf6d8d19faf125e832406ec4743f9565eca1d01df00f37dc6fbb5038df6 Section: debug Priority: extra Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/ Description: read/write NTFS driver for FUSE (debug) NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. . This package contains the debugging symbols. Package: ntfs-3g-dbg Source: ntfs-3g Version: 1:2012.1.15AR.8-2 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 2304 Depends: ntfs-3g (= 1:2012.1.15AR.8-2), ntfs-3g-dev (= 1:2012.1.15AR.8-2) Filename: i386/ntfs-3g-dbg_2012.1.15AR.8-2_i386.deb Size: 1023312 MD5sum: 4a6ff3dee9823289500939647e7d014d SHA1: bfe3c4b396867ee93d8fb4048e43e7677ef3f838 SHA256: b39d21e6fc3ecce7675d28f6cd082d51b916a7b2823f0c785234861e8cc1ee84 Section: debug Priority: extra Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/ Description: read/write NTFS driver for FUSE (debug) NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. . This package contains the debugging symbols. Package: ntfs-3g-dev Source: ntfs-3g Version: 1:2012.1.15AR.8-2 Architecture: amd64 Maintainer: Daniel Baumann Installed-Size: 892 Depends: ntfs-3g (= 1:2012.1.15AR.8-2) Filename: amd64/ntfs-3g-dev_2012.1.15AR.8-2_amd64.deb Size: 246702 MD5sum: afc6d72d29c6167bd0772973f3c5b414 SHA1: 0dd01e1ea2ae1a37d9c8d14a73cb489e3ea27f54 SHA256: 6c212d0ef9658ec701a1705ea41a61d533f886e005d2b217b840289ae718c28a Section: libdevel Priority: optional Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/ Description: read/write NTFS driver for FUSE (development) NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. . This package contains the development files. Package: ntfs-3g-dev Source: ntfs-3g Version: 1:2012.1.15AR.8-2 Architecture: i386 Maintainer: Daniel Baumann Installed-Size: 784 Depends: ntfs-3g (= 1:2012.1.15AR.8-2) Filename: i386/ntfs-3g-dev_2012.1.15AR.8-2_i386.deb Size: 245236 MD5sum: 6b0d58c07c9af919e4556bd280ac7026 SHA1: 30fdca04a0b767d338a7b164f629f685e31d9fa4 SHA256: 9e44c2379ce601e9edc4c14f3d913a5cacb7e936cd4a54225950a7e93a689220 Section: libdevel Priority: optional Homepage: http://www.tuxera.com/community/ntfs-3g-advanced/ Description: read/write NTFS driver for FUSE (development) NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS filesystem used by Microsoft Windows. . This package contains the development files. Package: patch Version: 2.6.1-3+deb7u1 Architecture: amd64 Maintainer: Christoph Berg Installed-Size: 248 Depends: libc6 (>= 2.7-1) Suggests: ed, diffutils-doc Filename: amd64/patch_2.6.1-3+deb7u1_amd64.deb Size: 122864 MD5sum: 6c0f191a5a3565b260372915ac8f4eb7 SHA1: 5facf606efc6e0153d60300978469e6e49f32b24 SHA256: 80a792ecf5784a4c444f18ac5bcc113203128499948a91448e1aef059f486500 Section: vcs Priority: standard Description: Apply a diff file to an original Patch will take a patch file containing any of the four forms of difference listing produced by the diff program and apply those differences to an original file, producing a patched version. Package: patch Version: 2.6.1-3+deb7u1 Architecture: i386 Maintainer: Christoph Berg Installed-Size: 252 Depends: libc6 (>= 2.7-1) Suggests: ed, diffutils-doc Filename: i386/patch_2.6.1-3+deb7u1_i386.deb Size: 123952 MD5sum: 20cd86c2553fbbf787773cfc0b85b82f SHA1: 8a69e0d13f26751acfea28d8c3ee4d0393c510de SHA256: c28c19105631c693e719934eec62892230a2d757c9ccb3e7fdc198926474e7bb Section: vcs Priority: standard Description: Apply a diff file to an original Patch will take a patch file containing any of the four forms of difference listing produced by the diff program and apply those differences to an original file, producing a patched version. Package: pcregrep Source: pcre3 Version: 8.12-5 Architecture: amd64 Maintainer: Ubuntu Developers Installed-Size: 80 Depends: libbz2-1.0, libc6 (>= 2.7-1), libpcre3 (= 8.12-5), zlib1g (>= 1:1.1.4) Replaces: pgrep (<< 4.5) Filename: amd64/pcregrep_8.12-5_amd64.deb Size: 71828 MD5sum: 9401ae9cfe5f61cb08b3c5303cc9da8a SHA1: c77f5d0e099ece4247cb8b853e013592c9d45f69 SHA256: fd713e1a8ca004157c0b80415efe653e5488f3fc006ee47b584b910800b86948 Section: utils Priority: optional Description: grep utility that uses perl 5 compatible regexes. Perl-style regexps have many useful features that the standard POSIX ones don't; this is basically the same as grep but with the different regexp syntax. . The other reason for the existence of pcregrep is that its source code is an example of programming with libpcre. Original-Maintainer: Mark Baker Package: pcregrep Source: pcre3 Version: 8.12-5 Architecture: i386 Maintainer: Ubuntu Developers Installed-Size: 72 Depends: libbz2-1.0, libc6 (>= 2.7-1), libpcre3 (= 8.12-5), zlib1g (>= 1:1.1.4) Replaces: pgrep (<< 4.5) Filename: i386/pcregrep_8.12-5_i386.deb Size: 68494 MD5sum: a75876d4b1ad3809aa548087b5f879f1 SHA1: fb53a272786148adfb6db4632e200a1986b30880 SHA256: ecc3683449cbd9fe6313decb792ee332b4c954ff50d35b21560b8ef3650dabd8 Section: utils Priority: optional Description: grep utility that uses perl 5 compatible regexes. Perl-style regexps have many useful features that the standard POSIX ones don't; this is basically the same as grep but with the different regexp syntax. . The other reason for the existence of pcregrep is that its source code is an example of programming with libpcre. Original-Maintainer: Mark Baker Package: pkg-config Version: 0.25-1.1 Architecture: amd64 Maintainer: Tollef Fog Heen Installed-Size: 220 Depends: libc6 (>= 2.7-1), libpopt0 (>= 1.14) Filename: amd64/pkg-config_0.25-1.1_amd64.deb Size: 383112 MD5sum: cf4b2675affac4ad95292848aa2f72af SHA1: f1b0884abe8bb4cbc66b6dae1baae79564239b4f SHA256: 3c6d6ca80eaa1a2b1e91f4c3cf89c12b79c02501ff6f113ccb9ecb80cd4650a7 Section: devel Priority: optional Homepage: http://pkg-config.freedesktop.org Description: manage compile and link flags for libraries pkg-config is a system for managing library compile and link flags that works with automake and autoconf. . Increasingly libraries ship with ".pc" files that allow querying of the compiler and linker flags needed to use them through the pkg-config(1) program. Package: pkg-config Version: 0.25-1.1 Architecture: i386 Maintainer: Tollef Fog Heen Installed-Size: 204 Depends: libc6 (>= 2.7-1), libpopt0 (>= 1.14) Filename: i386/pkg-config_0.25-1.1_i386.deb Size: 352318 MD5sum: a94b39870a92913c4dc0da26bb5ca0b6 SHA1: 6642bb52a17d4a44850e8ef4fa5a2ef81123c9e9 SHA256: afa49aa04a4e17a349c0735b46fcf351242954f093e4171d464673a781a67fe4 Section: devel Priority: optional Homepage: http://pkg-config.freedesktop.org Description: manage compile and link flags for libraries pkg-config is a system for managing library compile and link flags that works with automake and autoconf. . Increasingly libraries ship with ".pc" files that allow querying of the compiler and linker flags needed to use them through the pkg-config(1) program. Package: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 7216 Depends: python2.4-minimal (= 2.4.6-1), mime-support, libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libssl0.9.8 (>= 0.9.8f-5) Suggests: python2.4-doc, binutils Provides: python2.4-cjkcodecs, python2.4-plistlib, python2.4-profiler Filename: amd64/python2.4_2.4.6-1_amd64.deb Size: 1969258 MD5sum: de28afdab9a7090a3123c8b662c543dc SHA1: 24bb3e5f8df805c6efc4237e6bc6d67880573b73 SHA256: 69cdab58f6c380691d8470a2b91662d953c70277d751f3f432faefeba93b1607 Section: python Priority: optional Homepage: http://python.org/ Description: Interactive high-level object-oriented language (version 2.4) Version 2.4 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Original-Maintainer: Matthias Klose Python-Version: 2.4 Package: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 6960 Depends: python2.4-minimal (= 2.4.6-1), mime-support, libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libssl0.9.8 (>= 0.9.8f-5) Suggests: python2.4-doc, binutils Provides: python2.4-cjkcodecs, python2.4-plistlib, python2.4-profiler Filename: i386/python2.4_2.4.6-1_i386.deb Size: 1921740 MD5sum: a0a65fca1185e22c2fee327265c5e970 SHA1: 46a6ed8c6bb6331a8ddd0c3cf085f791d4d220db SHA256: d0c9f2ea6f3a39457bbd18451817143b5329edcf74f17061dc7884d73afe23b5 Section: python Priority: optional Homepage: http://python.org/ Description: Interactive high-level object-oriented language (version 2.4) Version 2.4 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Original-Maintainer: Matthias Klose Python-Version: 2.4 Package: python2.4-complete Source: python2.4 Version: 2.4.6-1 Architecture: all Maintainer: Felix Krull Installed-Size: 76 Depends: python2.4 (>= 2.4.6-1), libpython2.4 (>= 2.4.6-1), python2.4-examples (>= 2.4.6-1), python2.4-dev (>= 2.4.6-1), idle-python2.4 (>= 2.4.6-1), python2.4-doc (>= 2.4.6-1), python2.4-dbg (>= 2.4.6-1), python2.4-tk (>= 2.4.6-1), python2.4-gdbm (>= 2.4.6-1), python2.4-tk-dbg (>= 2.4.6-1), python2.4-gdbm-dbg (>= 2.4.6-1) Filename: all/python2.4-complete_2.4.6-1_all.deb Size: 28860 MD5sum: cbf61274d70accbeb7fafa3925198c60 SHA1: 26cb28a467f32ca6fd2462fc31c33155c9383bf8 SHA256: 911b7221c896efc84857ccd5ab48dcbcdebdf1440d67b447c8c75cd06114c6db Section: python Priority: extra Homepage: http://python.org/ Description: Interactive high-level object-oriented language (version 2.4) Version 2.4 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package depends on all individual packages that were generated from the python2.4 source package. Original-Maintainer: Matthias Klose Python-Version: 2.4 Package: python2.4-dbg Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 27784 Depends: python2.4 (>= 2.4.6-1), libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libssl0.9.8 (>= 0.9.8f-5), libstdc++6 (>= 4.1.1), zlib1g (>= 1:1.1.4) Suggests: python2.4-gdbm-dbg, python2.4-tk-dbg Filename: amd64/python2.4-dbg_2.4.6-1_amd64.deb Size: 8657000 MD5sum: be564159737f5981418f13dac35ff579 SHA1: 0e64bc5f79eafbf591c0f987a3f1914c71e0d3d3 SHA256: 1d34f6c94cecb32f82b5c99a6733f264b5e102dc1aafd42b0576523047caace2 Section: debug Priority: extra Homepage: http://python.org/ Description: Debug Build of the Python Interpreter (version 2.4) Python interpreter configured with --pydebug. Dynamically loaded modules are searched in /usr/lib/python2.4/lib-dynload/debug first. Original-Maintainer: Matthias Klose Package: python2.4-dbg Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 21488 Depends: python2.4 (>= 2.4.6-1), libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libssl0.9.8 (>= 0.9.8f-5), libstdc++6 (>= 4.1.1), zlib1g (>= 1:1.1.4) Suggests: python2.4-gdbm-dbg, python2.4-tk-dbg Filename: i386/python2.4-dbg_2.4.6-1_i386.deb Size: 7979406 MD5sum: f344298e60d2fe09b84bd6f3ef63871c SHA1: 49d883f74ea76c356f66407c2f75511b046ddeb2 SHA256: 7fc67e9e828951462e1e54488a1c1e5296c3d6e05b1da1508f32abfe26fdd15a Section: debug Priority: extra Homepage: http://python.org/ Description: Debug Build of the Python Interpreter (version 2.4) Python interpreter configured with --pydebug. Dynamically loaded modules are searched in /usr/lib/python2.4/lib-dynload/debug first. Original-Maintainer: Matthias Klose Package: python2.4-dev Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 7344 Depends: python2.4 (= 2.4.6-1), libpython2.4 (= 2.4.6-1), libssl-dev Recommends: libc6-dev | libc-dev Filename: amd64/python2.4-dev_2.4.6-1_amd64.deb Size: 2294566 MD5sum: 7ac1841576b095de7c1e70a7ef10eb39 SHA1: f21b8bc509da2baccaf0394c208b90e787b9a98f SHA256: d2e09d5c9b91374ac5094b392ae41c651af7195989726167aba109427601dce0 Section: python Priority: optional Homepage: http://python.org/ Description: Header files and a static library for Python (version 2.4) Header files, a static library and development tools for building Python (version 2.4) modules, extending the Python interpreter or embedding Python (version 2.4) in applications. . Maintainers of Python packages should read README.maintainers. Original-Maintainer: Matthias Klose Package: python2.4-dev Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 5636 Depends: python2.4 (= 2.4.6-1), libpython2.4 (= 2.4.6-1), libssl-dev Recommends: libc6-dev | libc-dev Filename: i386/python2.4-dev_2.4.6-1_i386.deb Size: 2123560 MD5sum: 241ddc742b1b00853410544e01d435ad SHA1: d0e32b37f0d34f391234fa0db18a198df5466817 SHA256: 8401fca1df48785221e18394a6ed7daf9eb80b67251085e2e2f86279c957a9d6 Section: python Priority: optional Homepage: http://python.org/ Description: Header files and a static library for Python (version 2.4) Header files, a static library and development tools for building Python (version 2.4) modules, extending the Python interpreter or embedding Python (version 2.4) in applications. . Maintainers of Python packages should read README.maintainers. Original-Maintainer: Matthias Klose Package: python2.4-doc Source: python2.4 Version: 2.4.6-1 Architecture: all Maintainer: Felix Krull Installed-Size: 18340 Depends: dpkg (>= 1.15.4) | install-info Suggests: python2.4 Filename: all/python2.4-doc_2.4.6-1_all.deb Size: 3465834 MD5sum: 674139d2fef57adc8c00a5a4e4618ab1 SHA1: d39902a14f44a4b6c19db1e7edb6f4feeec7944c SHA256: 2ea7f7ee86de6489f3fb094ea7d979f6c3d6bb8cdff4ec1a76bec7e222f52fe8 Section: doc Priority: optional Homepage: http://python.org/ Description: Documentation for the high-level object-oriented language Python (version 2.4) This is the official set of documentation for the interactive high-level object-oriented language Python (version 2.4). All documents are provided in HTML format, some in info format. The package consists of ten documents: . * What's New in Python 2.4 * Tutorial * Python Library Reference * Macintosh Module Reference * Python Language Reference * Extending and Embedding Python * Python/C API Reference * Installing Python Modules * Documenting Python * Distributing Python Modules Original-Maintainer: Matthias Klose Package: python2.4-examples Source: python2.4 Version: 2.4.6-1 Architecture: all Maintainer: Felix Krull Installed-Size: 3328 Depends: python2.4 (>= 2.4.6-1) Filename: all/python2.4-examples_2.4.6-1_all.deb Size: 597276 MD5sum: ccb7e4ab3c6b0e111bb07e9ca102c138 SHA1: 34b317676cfedda998152dfe91dbf0fe9704db29 SHA256: 6dee62bac05376ee9384084bbbbeba208e818d725c2f2edbe1fde3910bc7f690 Section: python Priority: optional Homepage: http://python.org/ Description: Examples for the Python language (version 2.4) Examples, Demos and Tools for Python (version 2.4). These are files included in the upstream Python distribution (version 2.4). Original-Maintainer: Matthias Klose Package: python2.4-gdbm Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 104 Depends: python2.4, libc6 (>= 2.7-1), libgdbm3 Suggests: python2.4-gdbm-dbg Filename: amd64/python2.4-gdbm_2.4.6-1_amd64.deb Size: 34716 MD5sum: b7b6c6825278d76fa344d63f4b42803d SHA1: 9859d2fb56a56af7725a576b2407dffad912bd82 SHA256: c278e652eca66d48183fa9db26fb99e39a65e02e7ab0c77c1bd0505ee5c6c0e5 Section: python Priority: optional Homepage: http://python.org/ Description: GNU dbm database support for Python (version 2.4) GNU dbm database module for Python (version 2.4). Install this if you want to create or read GNU dbm database files with Python. Original-Maintainer: Matthias Klose Package: python2.4-gdbm Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 104 Depends: python2.4, libc6 (>= 2.7-1), libgdbm3 Suggests: python2.4-gdbm-dbg Filename: i386/python2.4-gdbm_2.4.6-1_i386.deb Size: 34422 MD5sum: 510c4ff813e79e651bf582906cffd8f5 SHA1: f49122a3fc3d55cd83d4b7c7cf2689b2bad9943e SHA256: 7d2011fe3d62fd777af47201692832616188d88608c3d961f43c4e5dc41045df Section: python Priority: optional Homepage: http://python.org/ Description: GNU dbm database support for Python (version 2.4) GNU dbm database module for Python (version 2.4). Install this if you want to create or read GNU dbm database files with Python. Original-Maintainer: Matthias Klose Package: python2.4-gdbm-dbg Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 168 Depends: python2.4, python2.4-gdbm (= 2.4.6-1), libc6 (>= 2.7-1), libgdbm3 Filename: amd64/python2.4-gdbm-dbg_2.4.6-1_amd64.deb Size: 48482 MD5sum: 44f0ec0a80827f3dbf854e7ea786bb99 SHA1: 9ae842ba29374ac3b0b11e2e3635f8c7d8cd3a13 SHA256: b5d2cbbef40bb9d42386d19f1154d4616c8aa7c8042ef3ba4b608ba8a87e4166 Section: debug Priority: extra Homepage: http://python.org/ Description: GNU dbm database support for Python (version 2.4 debug extension) GNU dbm database module for Python (version 2.4). Install this if you want to create or read GNU dbm database files with Python. . This package contains the extensions built for the Python debug interpreter. Original-Maintainer: Matthias Klose Package: python2.4-gdbm-dbg Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 160 Depends: python2.4, python2.4-gdbm (= 2.4.6-1), libc6 (>= 2.7-1), libgdbm3 Filename: i386/python2.4-gdbm-dbg_2.4.6-1_i386.deb Size: 49486 MD5sum: 9e9cf40e096c887e316cc1d253ecc554 SHA1: e20b4d2c881554bf385d0924ae7a2569b6f36622 SHA256: 71de5489c0d78ecd49622f4ab95a0b21806613f7012cba20a6c5e539bc7645e8 Section: debug Priority: extra Homepage: http://python.org/ Description: GNU dbm database support for Python (version 2.4 debug extension) GNU dbm database module for Python (version 2.4). Install this if you want to create or read GNU dbm database files with Python. . This package contains the extensions built for the Python debug interpreter. Original-Maintainer: Matthias Klose Package: python2.4-minimal Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 3328 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), zlib1g (>= 1:1.1.4) Recommends: python2.4 Suggests: binfmt-support Conflicts: binfmt-support (<< 1.1.2) Filename: amd64/python2.4-minimal_2.4.6-1_amd64.deb Size: 1042686 MD5sum: 1f40e4590c4f2603e5e838626eba7d3c SHA1: 53c0d210389863db2cdba3c61e44117846d00a68 SHA256: 0e84b28a7759ca47b4d93c7ca5277251b601bfac98e5de01011d6a87de0fdc6f Section: python Priority: optional Homepage: http://python.org/ Description: Minimal subset of the Python language (version 2.4) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python2.4-minimal/README.Debian for a list of the modules contained in this package. Original-Maintainer: Matthias Klose Python-Runtime: python2.4 Python-Version: 2.4 Package: python2.4-minimal Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 3124 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), zlib1g (>= 1:1.1.4) Recommends: python2.4 Suggests: binfmt-support Conflicts: binfmt-support (<< 1.1.2) Filename: i386/python2.4-minimal_2.4.6-1_i386.deb Size: 975058 MD5sum: 47d384f7dccb0c52d6990d43adb42363 SHA1: 07d1fad8058b2c885e8f72eafbce605406425b56 SHA256: 5e9a86118b9b5787ac11b12976565541b45c7a3d6b7b68d7f56bfe6d9eebe86b Section: python Priority: optional Homepage: http://python.org/ Description: Minimal subset of the Python language (version 2.4) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python2.4-minimal/README.Debian for a list of the modules contained in this package. Original-Maintainer: Matthias Klose Python-Runtime: python2.4 Python-Version: 2.4 Package: python2.4-tk Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 160 Depends: python2.4, blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Suggests: tix, python2.4-tk-dbg Filename: amd64/python2.4-tk_2.4.6-1_amd64.deb Size: 50530 MD5sum: e1851801ec9dfb8a265930f000aadd41 SHA1: aef93737e11d1b84bcb5a2247689d0d3eba01c89 SHA256: aa110a4f53f039dc26225e0de6981abd8c1627e9636889058f0a61f537066120 Section: python Priority: optional Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 2.4) A module for writing portable GUI applications with Python (version 2.4) using Tk. Also known as Tkinter. Original-Maintainer: Matthias Klose Package: python2.4-tk Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 148 Depends: python2.4, blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Suggests: tix, python2.4-tk-dbg Filename: i386/python2.4-tk_2.4.6-1_i386.deb Size: 47402 MD5sum: 32ca3dcad043b3ccf3e77fe6c242e781 SHA1: f3b5229f5fc9992e0a7963a23736a15ebb7d7ecf SHA256: 904b70eb0df677421a24956613b1382c63581eb56e68adfa8c24a1aa09937e18 Section: python Priority: optional Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 2.4) A module for writing portable GUI applications with Python (version 2.4) using Tk. Also known as Tkinter. Original-Maintainer: Matthias Klose Package: python2.4-tk-dbg Source: python2.4 Version: 2.4.6-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 344 Depends: python2.4, python2.4-tk (= 2.4.6-1), blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Filename: amd64/python2.4-tk-dbg_2.4.6-1_amd64.deb Size: 107176 MD5sum: 5ef512c044c88afdca80ad98c0b926c7 SHA1: fae39e026a84c96a9d0710ffdeab01eaa8281d1b SHA256: 0d6e088f9baa2e6053920f7608581a90c97aee93b2e0e39a7d1242856b3d04b5 Section: debug Priority: extra Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 2.4 debug extension) A module for writing portable GUI applications with Python (version 2.4) using Tk. Also known as Tkinter. . This package contains the extensions built for the Python debug interpreter. Original-Maintainer: Matthias Klose Package: python2.4-tk-dbg Source: python2.4 Version: 2.4.6-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 300 Depends: python2.4, python2.4-tk (= 2.4.6-1), blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Filename: i386/python2.4-tk-dbg_2.4.6-1_i386.deb Size: 99284 MD5sum: 1318f46ce19fd85b49a9074ad75a5e6f SHA1: 0a9b26d93320366a068ef1e1064596b992064478 SHA256: 4998b7e6e071b60785e50bb3dc072e1429864d18f0135836cf89f2633c102648 Section: debug Priority: extra Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 2.4 debug extension) A module for writing portable GUI applications with Python (version 2.4) using Tk. Also known as Tkinter. . This package contains the extensions built for the Python debug interpreter. Original-Maintainer: Matthias Klose Package: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 8668 Depends: python3.2-minimal (= 3.2.4-1), mime-support, libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libsqlite3-0 Suggests: python3.2-doc, binutils Provides: python3.2-celementtree, python3.2-cjkcodecs, python3.2-ctypes, python3.2-elementtree, python3.2-profiler, python3.2-wsgiref Filename: amd64/python3.2_3.2.4-1_amd64.deb Size: 2241264 MD5sum: 60e1c989458c36d7e3dbba89a06dba92 SHA1: 5aff65801872bcf239389ac8f6b12b7c200eada1 SHA256: 9340af1901003a87530e0bd3ec8a03732e20a56240900a33fc7aad2faa52b40d Section: python Priority: optional Homepage: http://python.org/ Description: Interactive high-level object-oriented language (version 3.2) Version 3.2 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Original-Maintainer: Matthias Klose Python-Version: 3.2 Package: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 8396 Depends: python3.2-minimal (= 3.2.4-1), mime-support, libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libsqlite3-0 Suggests: python3.2-doc, binutils Provides: python3.2-celementtree, python3.2-cjkcodecs, python3.2-ctypes, python3.2-elementtree, python3.2-profiler, python3.2-wsgiref Filename: i386/python3.2_3.2.4-1_i386.deb Size: 2198156 MD5sum: 0e305fd5f49523ff8d1b8940587d64ed SHA1: c83dfaaa0bac85f46138e830751eafcd030f3906 SHA256: c326c92ebcb8b1f4771a2d54ea63518865319b7bdaa954a43b7ba486caaec2c9 Section: python Priority: optional Homepage: http://python.org/ Description: Interactive high-level object-oriented language (version 3.2) Version 3.2 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Original-Maintainer: Matthias Klose Python-Version: 3.2 Package: python3.2-complete Source: python3.2 Version: 3.2.4-1 Architecture: all Maintainer: Felix Krull Installed-Size: 88 Depends: python3.2 (>= 3.2.4-1), libpython3.2 (>= 3.2.4-1), python3.2-examples (>= 3.2.4-1), python3.2-dev (>= 3.2.4-1), idle-python3.2 (>= 3.2.4-1), python3.2-doc (>= 3.2.4-1), python3.2-tk (>= 3.2.4-1), python3.2-gdbm (>= 3.2.4-1) Recommends: python3.2-dbg (>= 3.2.4-1), python3.2-tk-dbg (>= 3.2.4-1), python3.2-gdbm-dbg (>= 3.2.4-1) Filename: all/python3.2-complete_3.2.4-1_all.deb Size: 34952 MD5sum: a766e02eef13c05c43f5517c5a726f6e SHA1: 812c4d011ea71fd4d69dd56de2ed07e66ca223c0 SHA256: a48a5f55a5b3e9a766d9cdd37f5f290d8500e62e795f0fa40396c11fcfc5e017 Section: python Priority: extra Homepage: http://python.org/ Description: Interactive high-level object-oriented language (version 3.2) Version 3.2 of the high-level, interactive object oriented language, includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package depends on all individual packages that were generated from the python3.2 source package. Original-Maintainer: Matthias Klose Python-Version: 3.2 Package: python3.2-dbg Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 40792 Depends: python3.2 (= 3.2.4-1), libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libexpat1 (>= 1.95.8), libffi5 (>= 3.0.4), libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libsqlite3-0, libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.2.0) Suggests: python3.2-gdbm-dbg, python3.2-tk-dbg Filename: amd64/python3.2-dbg_3.2.4-1_amd64.deb Size: 12707608 MD5sum: d391249d266bbde7368bf329894cab32 SHA1: 615a99b97b6d672ba483c5dbec9b17259ae9e9f1 SHA256: 59f4865f39dbd9f35014e3384ab64ccac313f360e5ebcf9ee4ca750c733e12be Section: debug Priority: extra Homepage: http://python.org/ Description: Debug Build of the Python Interpreter (version 3.2) Python interpreter configured with --pydebug. Dynamically loaded modules are searched in /usr/lib/python3.2/lib-dynload/debug first. Original-Maintainer: Matthias Klose Package: python3.2-dbg Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 31596 Depends: python3.2 (= 3.2.4-1), libbz2-1.0, libc6 (>= 2.7-1), libdb4.6, libexpat1 (>= 1.95.8), libffi5 (>= 3.0.4), libncursesw5 (>= 5.6+20071006-3), libreadline5 (>= 5.2), libsqlite3-0, libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.2.0) Suggests: python3.2-gdbm-dbg, python3.2-tk-dbg Filename: i386/python3.2-dbg_3.2.4-1_i386.deb Size: 11707706 MD5sum: c3255830581de4d436df0edd17b3fba4 SHA1: 63a110d034cf9161645e9d36b971bd97a1b195eb SHA256: 71c9853879ec6b9ab758737682783512a3b8fbea76081238e49a0d8cb7f65cae Section: debug Priority: extra Homepage: http://python.org/ Description: Debug Build of the Python Interpreter (version 3.2) Python interpreter configured with --pydebug. Dynamically loaded modules are searched in /usr/lib/python3.2/lib-dynload/debug first. Original-Maintainer: Matthias Klose Package: python3.2-dev Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 10940 Depends: python3.2 (= 3.2.4-1), libpython3.2 (= 3.2.4-1), libssl-dev Recommends: libc6-dev | libc-dev, python3.2-tk (= 3.2.4-1), idle-python3.2 (= 3.2.4-1), python3.2-gdbm (= 3.2.4-1) Filename: amd64/python3.2-dev_3.2.4-1_amd64.deb Size: 3528758 MD5sum: ca136e97097bcd251db1a90a694edb52 SHA1: fa1813d4170b8964f53d8007eb816508809d18ac SHA256: f5d1ddce8c6fc7c384e84c38566f2c07fb0cd9ada6dd4dd10425fc166b656fa2 Section: python Priority: optional Homepage: http://python.org/ Description: Header files and a static library for Python (version 3.2) Header files, a static library and development tools for building Python (version 3.2) modules, extending the Python interpreter or embedding Python (version 3.2) in applications. . Maintainers of Python packages should read README.maintainers. Original-Maintainer: Matthias Klose Package: python3.2-dev Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 8328 Depends: python3.2 (= 3.2.4-1), libpython3.2 (= 3.2.4-1), libssl-dev Recommends: libc6-dev | libc-dev, python3.2-tk (= 3.2.4-1), idle-python3.2 (= 3.2.4-1), python3.2-gdbm (= 3.2.4-1) Filename: i386/python3.2-dev_3.2.4-1_i386.deb Size: 3271514 MD5sum: 18b34df6ff4936ebe37b65182f94bfe6 SHA1: d3ca35646a9b7506f5e4a789155ff910fd221e42 SHA256: fd9d79e0232eb2bd43331516788cd7ffb20fd393ae68455a73ccedaa61a1f47d Section: python Priority: optional Homepage: http://python.org/ Description: Header files and a static library for Python (version 3.2) Header files, a static library and development tools for building Python (version 3.2) modules, extending the Python interpreter or embedding Python (version 3.2) in applications. . Maintainers of Python packages should read README.maintainers. Original-Maintainer: Matthias Klose Package: python3.2-doc Source: python3.2 Version: 3.2.4-1 Architecture: all Maintainer: Felix Krull Installed-Size: 140 Depends: libjs-jquery Suggests: python3.2 (= 3.2.4-1) Filename: all/python3.2-doc_3.2.4-1_all.deb Size: 37022 MD5sum: 2f62b081a4d6865134f4aa05b63b85cb SHA1: fb08f5ba91bda63ce75baf262f51e8ef08dba3d3 SHA256: 2cbc0a7c67989cfa8935d1031bd251e7d92b7f9789854397b328df578bc62905 Section: doc Priority: optional Homepage: http://python.org/ Description: Documentation for the high-level object-oriented language Python (version 3.2) This is the official set of documentation for the interactive high-level object-oriented language Python (version 3.2). All documents are provided in HTML format. The package consists of ten documents: . * What's New in Python 3.2 * Tutorial * Python Library Reference * Macintosh Module Reference * Python Language Reference * Extending and Embedding Python * Python/C API Reference * Installing Python Modules * Documenting Python * Distributing Python Modules Original-Maintainer: Matthias Klose Package: python3.2-examples Source: python3.2 Version: 3.2.4-1 Architecture: all Maintainer: Felix Krull Installed-Size: 1952 Depends: python3.2 (= 3.2.4-1) Filename: all/python3.2-examples_3.2.4-1_all.deb Size: 379414 MD5sum: b2f976170c54a8ae06933ea4db17bdb5 SHA1: b59381011b117db0da215ea11eeb8b11ce686dbf SHA256: 7117dd98641b2a7fb38169e5d77ccbac9e4b846ca6e4f69c372b89430f59f993 Section: python Priority: optional Homepage: http://python.org/ Description: Examples for the Python language (version 3.2) Examples, Demos and Tools for Python (version 3.2). These are files included in the upstream Python distribution (version 3.2). Original-Maintainer: Matthias Klose Package: python3.2-gdbm Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 136 Depends: python3.2 (= 3.2.4-1), libc6 (>= 2.7-1), libgdbm3 Suggests: python3.2-gdbm-dbg (= 3.2.4-1) Filename: amd64/python3.2-gdbm_3.2.4-1_amd64.deb Size: 42152 MD5sum: e8e3d33afe6cd0eba3fa0369a4a2867e SHA1: 25ebc1a031db0a1bbc9c8bed11d89070457ae403 SHA256: 1f4e3962b34868354aeb4ca00194f75c1fac670740753d0658de5995146e8ddc Section: python Priority: optional Homepage: http://python.org/ Description: GNU dbm database support for Python (version 3.2) GNU dbm database module for Python (version 3.2). Install this if you want to create or read GNU dbm database files with Python. Original-Maintainer: Matthias Klose Package: python3.2-gdbm Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 132 Depends: python3.2 (= 3.2.4-1), libc6 (>= 2.7-1), libgdbm3 Suggests: python3.2-gdbm-dbg (= 3.2.4-1) Filename: i386/python3.2-gdbm_3.2.4-1_i386.deb Size: 41576 MD5sum: 4c3cb8df71126cd4961b8d8de4b4c365 SHA1: c8221de4926af2fc78e4958cbedc95414f29d76b SHA256: 46d2c2bc81af3ba0e6f9e233578ab61127159446d40709b052cd254caa386514 Section: python Priority: optional Homepage: http://python.org/ Description: GNU dbm database support for Python (version 3.2) GNU dbm database module for Python (version 3.2). Install this if you want to create or read GNU dbm database files with Python. Original-Maintainer: Matthias Klose Package: python3.2-gdbm-dbg Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 188 Depends: python3.2, python3.2-gdbm (= 3.2.4-1), libc6 (>= 2.7-1), libgdbm3 Filename: amd64/python3.2-gdbm-dbg_3.2.4-1_amd64.deb Size: 56868 MD5sum: 0ceca951a499e895aa0b76ce00b2bd2d SHA1: 9e52304b30f988dc32951642a03a0373cb24e712 SHA256: 67c337ab79c13d157a0c7f221a5e88615459d1ffe15ad6dc693a3611d4accd2d Section: debug Priority: extra Homepage: http://python.org/ Description: GNU dbm database support for Python (version 3.2 debug extension) GNU dbm database module for Python (version 3.2). Install this if you want to create or read GNU dbm database files with Python. . This package contains the extensions built for the python debug interpreter. Original-Maintainer: Matthias Klose Package: python3.2-gdbm-dbg Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 176 Depends: python3.2, python3.2-gdbm (= 3.2.4-1), libc6 (>= 2.7-1), libgdbm3 Filename: i386/python3.2-gdbm-dbg_3.2.4-1_i386.deb Size: 58178 MD5sum: 154ab62dddbadb3dcc3fce449ce038ac SHA1: dc32d1a51f864387cbbe1bbb3ba44cc0b677e29c SHA256: ac928e23cb276aa58062141626e37eae59d2fa4904b9599b7029aa7be5f793b0 Section: debug Priority: extra Homepage: http://python.org/ Description: GNU dbm database support for Python (version 3.2 debug extension) GNU dbm database module for Python (version 3.2). Install this if you want to create or read GNU dbm database files with Python. . This package contains the extensions built for the python debug interpreter. Original-Maintainer: Matthias Klose Package: python3.2-minimal Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 5784 Depends: libc6 (>= 2.7-1), libexpat1 (>= 1.95.8), libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.2.0) Recommends: python3.2 Suggests: binfmt-support Conflicts: binfmt-support (<< 1.1.2) Filename: amd64/python3.2-minimal_3.2.4-1_amd64.deb Size: 1619810 MD5sum: 6906a962a8c1d455273684d7da281196 SHA1: ab95e944482f09efe2c48c1f329e735bb5d1d922 SHA256: 5df34e91f866b28404e24d1c88f06d69e07fdcf22d20fa972181d3cea8e24980 Section: python Priority: optional Homepage: http://python.org/ Description: Minimal subset of the Python language (version 3.2) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python3.2-minimal/README.Debian for a list of the modules contained in this package. Original-Maintainer: Matthias Klose Python-Runtime: python3.2 Python-Version: 3.2 Package: python3.2-minimal Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 5436 Depends: libc6 (>= 2.7-1), libexpat1 (>= 1.95.8), libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.2.0) Recommends: python3.2 Suggests: binfmt-support Conflicts: binfmt-support (<< 1.1.2) Filename: i386/python3.2-minimal_3.2.4-1_i386.deb Size: 1534566 MD5sum: 229460ecc1e65c60a75e109388ced01b SHA1: d093442a8256055657edb13b0e5ad6699edaf82b SHA256: 84cca523bca7afae92bdc8c37a2243395270d0872575e2d93397ce99fc1cad1e Section: python Priority: optional Homepage: http://python.org/ Description: Minimal subset of the Python language (version 3.2) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python3.2-minimal/README.Debian for a list of the modules contained in this package. Original-Maintainer: Matthias Klose Python-Runtime: python3.2 Python-Version: 3.2 Package: python3.2-tk Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 148 Depends: python3.2 (= 3.2.4-1), blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Suggests: tix, python3.2-tk-dbg (= 3.2.4-1) Filename: amd64/python3.2-tk_3.2.4-1_amd64.deb Size: 54538 MD5sum: 7735e17270b0df5107a62205937fcc19 SHA1: 7d5629fc0aba7111e09f72dcde4db045a3c366f8 SHA256: b8de467efc058975e9681b9d5dad865ccdd57c0ea6e7b5fa186cd99851a281a2 Section: python Priority: optional Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 3.2) A module for writing portable GUI applications with Python (version 3.2) using Tk. Also known as Tkinter. Original-Maintainer: Matthias Klose Package: python3.2-tk Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 140 Depends: python3.2 (= 3.2.4-1), blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Suggests: tix, python3.2-tk-dbg (= 3.2.4-1) Filename: i386/python3.2-tk_3.2.4-1_i386.deb Size: 51502 MD5sum: 64f71a404dedfbf219b5dcf8ca56e1f9 SHA1: 9fb5a3e2c174f49022c51c33d840a5f9de27ead3 SHA256: 3bd7aa74d12170d276c4b580b703c918e3f43f2aa013e5ff960d49bd09d3771e Section: python Priority: optional Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 3.2) A module for writing portable GUI applications with Python (version 3.2) using Tk. Also known as Tkinter. Original-Maintainer: Matthias Klose Package: python3.2-tk-dbg Source: python3.2 Version: 3.2.4-1 Architecture: amd64 Maintainer: Felix Krull Installed-Size: 332 Depends: python3.2 (= 3.2.4-1), python3.2-tk (= 3.2.4-1), blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Filename: amd64/python3.2-tk-dbg_3.2.4-1_amd64.deb Size: 110744 MD5sum: d3c9aad4381c3feaacfd4bf338ca7787 SHA1: 427c7706b6622dad610497d2f73ba54b329a75f6 SHA256: 210aa2ce4b3972d6ce05515844fee70adbde6aea968aa329f2147fc830eea82a Section: debug Priority: extra Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 3.2 debug extension) A module for writing portable GUI applications with Python (version 3.2) using Tk. Also known as Tkinter. . This package contains the extensions built for the python debug interpreter. Original-Maintainer: Matthias Klose Package: python3.2-tk-dbg Source: python3.2 Version: 3.2.4-1 Architecture: i386 Maintainer: Felix Krull Installed-Size: 296 Depends: python3.2 (= 3.2.4-1), python3.2-tk (= 3.2.4-1), blt (>= 2.4z), libc6 (>= 2.7-1), libx11-6, tcl8.5 (>= 8.5.0), tk8.5 (>= 8.5.0) Filename: i386/python3.2-tk-dbg_3.2.4-1_i386.deb Size: 103016 MD5sum: 26bce3506beb2c96f954099f353734ab SHA1: 55baa99232a95d0ed7611707777c9360fed75f1a SHA256: 9fbc270fe579164de26e3d15ac907554a6f2e59598a8ebccc1752723132a111a Section: debug Priority: extra Homepage: http://python.org/ Description: Tkinter - Writing Tk applications with Python (version 3.2 debug extension) A module for writing portable GUI applications with Python (version 3.2) using Tk. Also known as Tkinter. . This package contains the extensions built for the python debug interpreter. Original-Maintainer: Matthias Klose Package: quilt Version: 0.48-7vnz1 Architecture: all Maintainer: Martin Quinson Installed-Size: 872 Depends: patch, diffstat, bzip2, gettext, bsdmainutils Recommends: debhelper, cdbs Suggests: procmail, graphviz Filename: all/quilt_0.48-7vnz1_all.deb Size: 2049560 MD5sum: 11eea65a162a1264518c4069e1a44323 SHA1: 063235465ba972ece5ac886d9f406afa911f68b4 SHA256: 36781291aae364f80dfe2922abf9f13a1bf07d0ae6cb91913b138aa9f726bb96 Section: vcs Priority: optional Homepage: http://savannah.nongnu.org/projects/quilt Description: Tool to work with series of patches Quilt manages a series of patches by keeping track of the changes each of them makes. They are logically organized as a stack, and you can apply, un-apply, refresh them easily by traveling into the stack (push/pop). . Quilt is good for managing additional patches applied to a package received as a tarball or maintained in another version control system. The stacked organization is proven to be efficient for the management of very large patch sets (more than hundred patches). As matter of fact, it was designed by and for Linux kernel hackers (Andrew Morton, from the -mm branch, is the original author), and its main use by the current upstream maintainer is to manage the (hundreds of) patches against the kernel made for the SUSE distribution. . This package provides seamless integration into Debhelper or CDBS, allowing maintainers to easily add a quilt-based patch management system in their packages. The package also provides some basic support for those not using those tools. See README.Debian for more information. Package: scdoc Version: 1.10.0-1 Architecture: amd64 Maintainer: Birger Schacht Installed-Size: 632 Filename: amd64/scdoc_1.10.0-1_amd64.deb Size: 260938 MD5sum: 172301345e25f57560072f57763b2b22 SHA1: 2c2bee3bc8ce49d32b4caa6ded69acc454291bcd SHA256: 85bfd8dbf54f8a7279e624dc4623fa0b5c6564b5768e1962cc381e03e498afc0 Section: text Priority: optional Homepage: https://git.sr.ht/~sircmpwn/scdoc Description: Simple man page generator written for POSIX systems written in C99 scdoc is a tool designed to make the process of writing man pages more friendly. It reads scdoc syntax from stdin and writes roff to stdout, suitable for reading with man(1). Package: scdoc Version: 1.10.0-1 Architecture: i386 Maintainer: Birger Schacht Installed-Size: 564 Filename: i386/scdoc_1.10.0-1_i386.deb Size: 246868 MD5sum: 165ec782cb0be208957c80e81aa790d8 SHA1: 603aa617adcb8c844c50f454a3a603a154c86980 SHA256: 4f43b9609400cd11d618dcc52c4d95d17b88ec8586a074d7db38f8f73d19e62b Section: text Priority: optional Homepage: https://git.sr.ht/~sircmpwn/scdoc Description: Simple man page generator written for POSIX systems written in C99 scdoc is a tool designed to make the process of writing man pages more friendly. It reads scdoc syntax from stdin and writes roff to stdout, suitable for reading with man(1). Package: sqlite3 Version: 3.7.13-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 192 Depends: libc6 (>= 2.7-1), libreadline5 (>= 5.2), libsqlite3-0 (= 3.7.13-1) Suggests: sqlite3-doc Filename: amd64/sqlite3_3.7.13-1_amd64.deb Size: 647830 MD5sum: 386c7bea2cdad03e70d6f55f74b3f0a7 SHA1: 79a66a8dd3c9a7ccff0e37cdc67137c37b19c156 SHA256: ebdc98f4b236f1761f09c555bc20a9d943ee366f47cc543334d6fba1c69f7e0f Section: database Priority: optional Homepage: http://www.sqlite.org/ Description: Command line interface for SQLite 3 SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Package: sqlite3 Version: 3.7.13-1 Architecture: i386 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 192 Depends: libc6 (>= 2.7-1), libreadline5 (>= 5.2), libsqlite3-0 (= 3.7.13-1) Suggests: sqlite3-doc Filename: i386/sqlite3_3.7.13-1_i386.deb Size: 642754 MD5sum: 076aaf43a2e82156bd989fbd2e519b57 SHA1: cb23479ee382fd0a5cc8ea4fb2726df250c250c3 SHA256: 29b68df0a9a1428801f44d6fc0eff84ad156582d6b7bb621d24dc5f11c6939e5 Section: database Priority: optional Homepage: http://www.sqlite.org/ Description: Command line interface for SQLite 3 SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. Package: sqlite3-doc Source: sqlite3 Version: 3.7.13-1 Architecture: all Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 9732 Recommends: sqlite3 Filename: all/sqlite3-doc_3.7.13-1_all.deb Size: 22362508 MD5sum: e2fd50ac1e3d58f68adfdc3d403ac782 SHA1: 2d36f3ce30a506c63a0faaa6b352ff6c68feaf6d SHA256: 434acc511717ff68806613561c29c6b83bee822928b2932e9c67d4779d1ef3bd Section: doc Priority: optional Homepage: http://www.sqlite.org/ Description: SQLite 3 documentation SQLite is a C library that implements an SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process. . This package contains the documentation that is also available on the SQLite homepage. Package: tar Version: 1.29b-1.1 Architecture: amd64 Essential: yes Maintainer: Ubuntu Developers Installed-Size: 928 Pre-Depends: libacl1 (>= 2.2.11-1), libc6 (>= 2.7-1), libselinux1 (>= 2.0.59) Suggests: bzip2, ncompress, xz-utils, tar-scripts Conflicts: cpio (<= 2.4.2-38) Breaks: dpkg-dev (<< 1.14.26) Replaces: cpio (<< 2.4.2-39) Filename: amd64/tar_1.29b-1.1_amd64.deb Size: 482004 MD5sum: c021cd9f0f9310586386e208f976aad4 SHA1: 96e2152f95298331b0b12eef9e42a65261721196 SHA256: f3dba6352ca4e9d9254b6b7ffb6ec4bde447f8fa4723f8f6c30936b4efa46d7b Section: utils Priority: required Description: GNU version of the tar archiving utility Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Original-Maintainer: Bdale Garbee Package: tar Version: 1.29b-1.1 Architecture: i386 Essential: yes Maintainer: Ubuntu Developers Installed-Size: 836 Pre-Depends: libacl1 (>= 2.2.11-1), libc6 (>= 2.7-1), libselinux1 (>= 2.0.59) Suggests: bzip2, ncompress, xz-utils, tar-scripts Conflicts: cpio (<= 2.4.2-38) Breaks: dpkg-dev (<< 1.14.26) Replaces: cpio (<< 2.4.2-39) Filename: i386/tar_1.29b-1.1_i386.deb Size: 454020 MD5sum: 4b4a595ae10cfc6fb6605d464ddb84f1 SHA1: d09630a9d7b077b0385df333e066c326b504d311 SHA256: 5a2be88bf5d8ac1a9f6651439b1aabf83005f42e8b8ccdf84a7e2da060d565dd Section: utils Priority: required Description: GNU version of the tar archiving utility Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Original-Maintainer: Bdale Garbee Package: tar-scripts Source: tar Version: 1.29b-1.1 Architecture: amd64 Maintainer: Ubuntu Developers Installed-Size: 84 Conflicts: dump, openafs-client Filename: amd64/tar-scripts_1.29b-1.1_amd64.deb Size: 22132 MD5sum: df1646ca7d00823a7e02521252738aae SHA1: 1d9f0d8f7421f300eb7e26bd95ca8fe1d089b8e2 SHA256: 19409b6970e8098967687430a7a47fa8f7696b4d0bca7c9b7102cf01b3f6eb06 Section: utils Priority: optional Description: optional scripts for GNU version of the tar archiving utility This package provides the backup, restore, backup.sh, and dump-remind scripts that are mentioned in the tar documentation. Original-Maintainer: Bdale Garbee Package: tar-scripts Source: tar Version: 1.29b-1.1 Architecture: i386 Maintainer: Ubuntu Developers Installed-Size: 84 Conflicts: dump, openafs-client Filename: i386/tar-scripts_1.29b-1.1_i386.deb Size: 22122 MD5sum: 12009304b1712f7beee81a7af01777f5 SHA1: b33d6fbc25bca716088726b3f7b8324ad4ca1184 SHA256: 02935567ecda625ea0fe4b6008564956e189cb5eace87c931deb93c8c25a270d Section: utils Priority: optional Description: optional scripts for GNU version of the tar archiving utility This package provides the backup, restore, backup.sh, and dump-remind scripts that are mentioned in the tar documentation. Original-Maintainer: Bdale Garbee Package: texi2html Version: 1.82-1vnz1 Architecture: all Maintainer: Francesco Cecconi Installed-Size: 2140 Depends: perl, dpkg (>= 1.15.4) | install-info Suggests: latex2html Filename: all/texi2html_1.82-1vnz1_all.deb Size: 445294 MD5sum: b5357536d622190855be54cb8c1f3127 SHA1: c004703f9a9896408ce8665471ee1341545687f0 SHA256: 87bc0c52677d9d3d2f628a7d35a93b8758a531a6eac1a71dfb304f17d3d12a63 Section: text Priority: optional Homepage: http://www.nongnu.org/texi2html/ Description: Convert Texinfo files to HTML texi2html is a Perl script that converts Texinfo files to HTML. . The program takes Texinfo files (not info ones) and produces a set of HTML files. The quality of the output is close to the printed output and is much better than an info->HTML gateway. . Compared to the output of `makeinfo --html', texi2html's output is more customizable and (subjectively) produces better output by default. Package: texinfo Version: 4.13a.dfsg.1-8vnz2 Architecture: amd64 Maintainer: Debian TeX maintainers Installed-Size: 2600 Depends: libc6 (>= 2.7-1) Suggests: texlive-base, texlive-latex-base, texlive-generic-recommended, texinfo-doc-nonfree Conflicts: ja-trans (<= 0.7-3.1), tetex-base (<< 3.0), tetex-bin (<< 3.0) Replaces: tetex-base (<< 1.0.2+20000804-9), tetex-bin (<< 3.0) Filename: amd64/texinfo_4.13a.dfsg.1-8vnz2_amd64.deb Size: 5996590 MD5sum: ea9b3960cb838dc6d158aba7d3b8d131 SHA1: 2f39196586003b75c300bc31c4c464f0cd5f12b7 SHA256: 302f83c36bd7edf319081a5295c6934ba69f5c1ae2dcca51275bb63a0896d503 Section: text Priority: standard Description: Documentation system for on-line information and printed output Texinfo is a documentation system that uses a single source file to produce both on-line information and printed output. . Using Texinfo, you can create a printed document with the normal features of a book, including chapters, sections, cross references, and indices. From the same Texinfo source file, you can create a menu-driven, on-line Info file with nodes, menus, cross references, and indices. Package: texinfo Version: 4.13a.dfsg.1-8vnz2 Architecture: i386 Maintainer: Debian TeX maintainers Installed-Size: 2560 Depends: libc6 (>= 2.7-1) Suggests: texlive-base, texlive-latex-base, texlive-generic-recommended, texinfo-doc-nonfree Conflicts: ja-trans (<= 0.7-3.1), tetex-base (<< 3.0), tetex-bin (<< 3.0) Replaces: tetex-base (<< 1.0.2+20000804-9), tetex-bin (<< 3.0) Filename: i386/texinfo_4.13a.dfsg.1-8vnz2_i386.deb Size: 5920170 MD5sum: 746496664512c309581eb8720a2361da SHA1: 7fdb6c07cdc6be0589987853137abd7a0e4fb971 SHA256: 03650d465a398e1f6e4a759d2a3fa14cf4c6bb099ecb219f7d0e2205418bd05b Section: text Priority: standard Description: Documentation system for on-line information and printed output Texinfo is a documentation system that uses a single source file to produce both on-line information and printed output. . Using Texinfo, you can create a printed document with the normal features of a book, including chapters, sections, cross references, and indices. From the same Texinfo source file, you can create a menu-driven, on-line Info file with nodes, menus, cross references, and indices. Package: w3c-sgml-lib Version: 1.2-1.1 Architecture: all Maintainer: Debian XML/SGML Group Installed-Size: 4448 Depends: sgml-base (>= 1.17), xml-core (>= 0.12) Conflicts: w3c-dtd-xhtml Replaces: w3c-dtd-xhtml Provides: w3c-dtd-xhtml Filename: all/w3c-sgml-lib_1.2-1.1_all.deb Size: 624636 MD5sum: 160a1d9ab93711b0d940305e30f98ffb SHA1: 8024b14d6cf83d9f6150a32943d2c833cd4ae4c4 SHA256: fbfe421b747c2e5c50068fc54e421423c7ff69791a4b7a530b71da11708d4900 Section: text Priority: optional Homepage: http://validator.w3.org/sgml-lib Description: w3.org DTD and catalog files This package consists of all the definition files used by the W3C Markup Validator. It consists of DTDs and modules, entity files and XML and SGML catalogs. The catalogs are registered with the root catalogs. . Since the files come from the W3C they layout is different from the w3c-dtd-xhtml package. However in an effort to maintain backwards compatibility there are symbolic links to best matches. These are not referenced by the catalog files and will be removd in a leter release. Package: wodim Source: cdrkit Version: 9:1.1.11-1.1 Architecture: amd64 Maintainer: Joerg Jaspert Installed-Size: 904 Depends: libc6 (>= 2.7-1), libcap2 (>= 2.11) Recommends: genisoimage Suggests: cdrkit-doc Conflicts: cdrecord, xcdroast (<< 0.98+0alpha15-11) Replaces: cdrecord, cdrtools-doc Provides: cdrecord Filename: amd64/wodim_1.1.11-1.1_amd64.deb Size: 458252 MD5sum: 36393715ef7fc8ac59859df0d928f481 SHA1: 2d08e2dc0bafe40386600f44c66d947fbd20e74d SHA256: 51966f81ea6b75c46be528511ec39cff28018d3d226a517454a41c5bafb89dfe Section: otherosfs Priority: optional Description: command line CD/DVD writing tool wodim allows you to create CDs or DVDs on a CD/DVD recorder. It supports writing data, audio, mixed, multi-session, and CD+ disc and DVD data and video disks on DVD capable devices, on just about every type of CD/DVD recorder out there. . Please install cdrkit-doc if you want most of the documentation and README files. Package: wodim Source: cdrkit Version: 9:1.1.11-1.1 Architecture: i386 Maintainer: Joerg Jaspert Installed-Size: 828 Depends: libc6 (>= 2.7-1), libcap2 (>= 2.11) Recommends: genisoimage Suggests: cdrkit-doc Conflicts: cdrecord, xcdroast (<< 0.98+0alpha15-11) Replaces: cdrecord, cdrtools-doc Provides: cdrecord Filename: i386/wodim_1.1.11-1.1_i386.deb Size: 430524 MD5sum: 4e9f6ea34c11afc00ac78949c8804bf1 SHA1: 283b38780c2948289a15ea11d90b83b5f4671eb1 SHA256: 1bdcb50f5a5ac596f6de38a777c2377021c68145502c228112cc9d7dfa3e65e3 Section: otherosfs Priority: optional Description: command line CD/DVD writing tool wodim allows you to create CDs or DVDs on a CD/DVD recorder. It supports writing data, audio, mixed, multi-session, and CD+ disc and DVD data and video disks on DVD capable devices, on just about every type of CD/DVD recorder out there. . Please install cdrkit-doc if you want most of the documentation and README files. Package: xz-lzma Source: xz-utils Version: 5.0.0-2.1 Architecture: all Maintainer: Jonathan Nieder Installed-Size: 160 Depends: xz-utils Conflicts: lzip (<< 1.8~rc2), lzma Replaces: lzip (<< 1.8~rc2) Provides: lzma Filename: all/xz-lzma_5.0.0-2.1_all.deb Size: 107834 MD5sum: 1ec629dcebbd080b6c42d4e1cfab88de SHA1: dcf5bbe1256c7d195ad44dcec0a0c1a81b97cd17 SHA256: 0d65af4d0ededb28b41efc86ef4809b8f641f56b36d039deafe563637df70b09 Section: utils Priority: extra Homepage: http://tukaani.org/xz/ Description: XZ-format compression utilities - compatibility commands XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides symbolic links allowing xz-utils to provide the same interface for manipulating LZMA files as the lzma package. The xz-utils package can handle LZMA files on its own; this package is only necessary when using scripts or other programs that require the older command names. Package: xz-utils Version: 5.0.0-2.1 Architecture: amd64 Maintainer: Jonathan Nieder Installed-Size: 460 Depends: libc6 (>= 2.7-1), liblzma2 Suggests: xz-lzma Conflicts: xz-lzma (<< 4.999.9beta+20091004-1) Replaces: xz-lzma (<< 4.999.9beta+20091004-1) Filename: amd64/xz-utils_5.0.0-2.1_amd64.deb Size: 205700 MD5sum: e846d1d964f7633bad6f376f99707888 SHA1: f5ae6b8057d1327d942ad1fd1e4e63edf8fa0abb SHA256: 6b914f693dc9b5b95c80033e25436725c4d1aeaac8aebf9e2943bb1fe21f2366 Section: utils Priority: required Homepage: http://tukaani.org/xz/ Description: XZ-format compression utilities XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the command line tools for working with XZ compression, including xz, unxz, xzcat, xzgrep, and so on. They can also handle the older LZMA format, and if invoked via appropriate symlinks will emulate the behavior of the commands in the lzma package. . The XZ format is similar to the older LZMA format but includes some improvements for general use: . * 'file' magic for detecting XZ files; * crc64 data integrity check; * limited random-access reading support; * improved support for multithreading (not used in xz-utils); * support for flushing the encoder. Package: xz-utils Version: 5.0.0-2.1 Architecture: i386 Maintainer: Jonathan Nieder Installed-Size: 452 Depends: libc6 (>= 2.7-1), liblzma2 Suggests: xz-lzma Conflicts: xz-lzma (<< 4.999.9beta+20091004-1) Replaces: xz-lzma (<< 4.999.9beta+20091004-1) Filename: i386/xz-utils_5.0.0-2.1_i386.deb Size: 204060 MD5sum: 7a6859f5ea38eaf55ec3c46dd5bf70da SHA1: e14cf714223eb78f457fb96ea679d35976d35587 SHA256: 9674014994f200b59ba8786e495d2c307c0541773044d4dc3c054316afa832cc Section: utils Priority: required Homepage: http://tukaani.org/xz/ Description: XZ-format compression utilities XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the command line tools for working with XZ compression, including xz, unxz, xzcat, xzgrep, and so on. They can also handle the older LZMA format, and if invoked via appropriate symlinks will emulate the behavior of the commands in the lzma package. . The XZ format is similar to the older LZMA format but includes some improvements for general use: . * 'file' magic for detecting XZ files; * crc64 data integrity check; * limited random-access reading support; * improved support for multithreading (not used in xz-utils); * support for flushing the encoder. Package: xzdec Source: xz-utils Version: 5.0.0-2.1 Architecture: amd64 Maintainer: Jonathan Nieder Installed-Size: 256 Depends: libc6 (>= 2.7-1) Suggests: xz-utils Conflicts: xz-lzma (<< 4.999.9beta+20091004-1) Replaces: xz-lzma (<< 4.999.9beta+20091004-1) Filename: amd64/xzdec_5.0.0-2.1_amd64.deb Size: 150026 MD5sum: eaa0de538d7155a75f6b168bc37cb6c0 SHA1: 9961d4ef50f36c5d87ce2a6e354c71da3211d9dc SHA256: 806b1409b5b914f5776be9a5446fb22342539a81f9faca38d56f6578ae3e549c Section: utils Priority: extra Homepage: http://tukaani.org/xz/ Description: XZ-format compression utilities - tiny decompressors XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the xzdec and lzmadec utilities, which write the decompressed version of a compressed file to standard output. The binaries are very small, so they can be easily stored on small media with some compressed files, and they are linked statically against liblzma so they can be used on machines without a compatible version of liblzma installed. However, they have: . * no compression support; * no support for writing to a file other than standard output; * no translated messages; * been optimized for size rather than speed. . For a full-featured xzcat command without these limitations, use the xz-utils package instead. Package: xzdec Source: xz-utils Version: 5.0.0-2.1 Architecture: i386 Maintainer: Jonathan Nieder Installed-Size: 244 Depends: libc6 (>= 2.7-1) Suggests: xz-utils Conflicts: xz-lzma (<< 4.999.9beta+20091004-1) Replaces: xz-lzma (<< 4.999.9beta+20091004-1) Filename: i386/xzdec_5.0.0-2.1_i386.deb Size: 146996 MD5sum: 7bd635fec74980167284d18ebffb8c22 SHA1: e66b19ce6c0e4215fefcbfcb679061f4da7524ec SHA256: e92114b844132baf984131cb0eb0965025b2ee67a4eb9a04f57f05db966a66ea Section: utils Priority: extra Homepage: http://tukaani.org/xz/ Description: XZ-format compression utilities - tiny decompressors XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . This package provides the xzdec and lzmadec utilities, which write the decompressed version of a compressed file to standard output. The binaries are very small, so they can be easily stored on small media with some compressed files, and they are linked statically against liblzma so they can be used on machines without a compatible version of liblzma installed. However, they have: . * no compression support; * no support for writing to a file other than standard output; * no translated messages; * been optimized for size rather than speed. . For a full-featured xzcat command without these limitations, use the xz-utils package instead.