# -----------------------------------------------------------------------------
#
# (c) 2009 The University of Glasgow
#
# This file is part of the GHC build system.
#
# To understand how the build system works and how to modify it, see
#      https://gitlab.haskell.org/ghc/ghc/wikis/building/architecture
#      https://gitlab.haskell.org/ghc/ghc/wikis/building/modifying
#
# -----------------------------------------------------------------------------

# Eliminate use of the built-in implicit rules, and clear out the default list
# of suffixes for suffix rules. Speeds up make quite a bit. Both are needed
# for the shortest `make -d` output.
# Don't set --no-builtin-variables; some rules might stop working if you do
# (e.g. 'make clean' in testsuite/ currently relies on an implicit $RM).
MAKEFLAGS += --no-builtin-rules
.SUFFIXES:


# -----------------------------------------------------------------------------
# Sanitize environment

# See #11530
export GREP_OPTIONS :=

ifneq "$(filter maintainer-clean distclean clean clean_% help,$(MAKECMDGOALS))" ""
-include mk/config.mk
else
include mk/config.mk
ifeq "$(ProjectVersion)" ""
$(error Please run ./configure first)
endif
endif

include mk/custom-settings.mk


ifeq "$(wildcard distrib/)" ""

# We're in a bindist

.PHONY: default
default:
	@echo 'Run "make install" to install'
	@false

.PHONY: install show
install show:
	$(MAKE) --no-print-directory -f ghc.mk $@ BINDIST=YES NO_INCLUDE_DEPS=YES

# Note [install-strip]
#
# install-strip is like install, but it strips the executable files while
# installing them.
#
# From http://www.gnu.org/prep/standards/html_node/Standard-Targets.html:
#
#   "install-strip should not strip the executables in the build directory
#   which are being copied for installation. It should only strip the copies
#   that are installed. "

.PHONY: install-strip
install-strip:
	# See Note [install-strip].
	$(MAKE) --no-print-directory -f ghc.mk INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install BINDIST=YES NO_INCLUDE_DEPS=YES

else

.PHONY: default
default : all
	@:

# For help, type 'make help'
.PHONY: help
help:
	@cat MAKEHELP.md

# No need to update makefiles for these targets:
# (the ones we're filtering out)
REALGOALS=$(filter-out \
    binary-dist \
    binary-dist-prep \
    install-strip \
    sdist sdist-ghc \
    sdist-ghc-prep \
    sdist-windows-tarballs \
    sdist-windows-tarballs-prep \
    sdist-testsuite \
    sdist-testsuite-prep \
    bootstrapping-files \
    framework-pkg \
    clean \
    clean_% \
    distclean \
    maintainer-clean \
    show \
    show! \
    echo \
    help \
    test \
    fulltest \
    slowtest \
    fasttest \
    fast \
  ,$(MAKECMDGOALS))

# configure touches certain files even if they haven't changed.  This
# can mean a lot of unnecessary recompilation after a re-configure, so
# here we cache the old versions of these files so we can restore the
# timestamps.
%.old:  %
	@set -x && test -f $@ && cmp -s $< $@ || cp -p $< $@
	touch -r $@ $<


# NB. not the same as saying '%: ...', which doesn't do the right thing:
# it does nothing if we specify a target that already exists.
.PHONY: $(REALGOALS) all
$(REALGOALS) all: mk/config.mk.old mk/project.mk.old compiler/ghc.cabal.old
ifneq "$(OMIT_PHASE_0)" "YES"
	@echo "===--- building phase 0"
	$(MAKE) --no-print-directory -f ghc.mk phase=0 phase_0_builds
endif
ifneq "$(OMIT_PHASE_1)" "YES"
	@echo "===--- building phase 1"
	$(MAKE) --no-print-directory -f ghc.mk phase=1 phase_1_builds
endif
	@echo "===--- building final phase"
	$(MAKE) --no-print-directory -f ghc.mk phase=final $@

# if BINARY_DIST_DIR is not set, assume we want the old
# behaviour of placing the binary dist into the current
# directory. Provide BINARY_DIST_DIR to put the final
# binary distribution elsewhere.
BINARY_DIST_DIR ?= .

.PHONY: binary-dist
binary-dist: binary-dist-prep
	mv bindistprep/*.tar.$(TAR_COMP_EXT) "$(BINARY_DIST_DIR)"

.PHONY: binary-dist-prep
binary-dist-prep:
ifeq "$(mingw32_TARGET_OS)" "1"
	$(MAKE) --no-print-directory -f ghc.mk windows-binary-dist-prep
else
	rm -f bindist-list
	$(MAKE) --no-print-directory -f ghc.mk bindist-list BINDIST=YES
	$(MAKE) --no-print-directory -f ghc.mk unix-binary-dist-prep
endif

.PHONY: install-strip
install-strip:
	# See Note [install-strip].
	$(MAKE) --no-print-directory -f ghc.mk INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install

.PHONY: sdist sdist-ghc sdist-ghc-prep sdist-windows-tarballs sdist-windows-tarballs-prep sdist-testsuite sdist-testsuite-prep
# Just running `./boot && ./configure && make sdist` should work, so skip
# phase 0 and 1 and don't build any dependency files.
sdist sdist-ghc sdist-ghc-prep sdist-windows-tarballs sdist-windows-tarballs-prep sdist-testsuite sdist-testsuite-prep :
	$(MAKE) --no-print-directory -f ghc.mk $@ NO_INCLUDE_DEPS=YES NO_INCLUDE_PKGDATA=YES

.PHONY: clean distclean maintainer-clean
clean distclean maintainer-clean:
	$(MAKE) --no-print-directory -f ghc.mk $@ CLEANING=YES
	test ! -d testsuite || $(MAKE) -C testsuite $@

.PHONY: $(filter clean_%,$(MAKECMDGOALS))
$(filter clean_%, $(MAKECMDGOALS)) : clean_% :
	$(MAKE) --no-print-directory -f ghc.mk $@ CLEANING=YES

.PHONY: bootstrapping-files show echo
bootstrapping-files show echo:
	$(MAKE) --no-print-directory -f ghc.mk $@

.PHONY: show!
show!:
	$(MAKE) --no-print-directory -f ghc.mk show NO_INCLUDE_PKGDATA=YES

ifeq "$(darwin_TARGET_OS)" "1"
.PHONY: framework-pkg
framework-pkg:
	$(MAKE) -C distrib/MacOS $@
endif

# If the user says 'make A B', then we don't want to invoke two
# instances of the rule above in parallel:
.NOTPARALLEL:

endif

# Note [validate and testsuite speed]
#
# There are 3 different validate and testsuite speed settings:
# fast, normal and slow.
#
#                              how    how   used
#           cd tests  config.  many   many  by
# validate  && make   speed=   tests  ways  whom
# =============================================================================
# --fast    fast      2        some   1+exs Travis (to stay within time limit)
# --normal  test      1        all    1+exs Phabricator (slow takes too long?)
# --slow    slow      0        all    all   Nightly (slow is ok)
#
#           accept    1        all    1
#
# `--fast` and `--normal` run one default way, as well as any other ways which
# are explicitly requested by the test using extra_ways().
#
# `make accept` should run all tests exactly once. There is no point in
# accepting a test for multiple ways, since it should produce the same output
# for all ways.
#
# To make sure all .stderr and .stdout files in the testsuite are never
# out-of-date, it is useful if Phabricator, via a normal `./validate` and `make
# test`, runs each test at least once.
.PHONY: fasttest
fasttest:
	$(MAKE) -C testsuite/tests SUMMARY_FILE=../../testsuite_summary.txt fast

.PHONY: test
test:
	$(MAKE) -C testsuite/tests SUMMARY_FILE=../../testsuite_summary.txt

.PHONY: slowtest fulltest
slowtest fulltest:
	$(MAKE) -C testsuite/tests SUMMARY_FILE=../../testsuite_summary.txt slow

.PHONY: fast
fast:
	@echo "You can use 'make fast' only from inside a sub-component directory."
	@exit 1